| Subject | Re: [PATCH v3 02/24] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node | From | Philipp Zabel <> | Date | Fri, 13 Jan 2017 12:57:58 +0100 |
| |
Am Freitag, den 06.01.2017, 18:11 -0800 schrieb Steve Longerbeam: > Add to the MIPI CSI2 receiver node: compatible string, interrupt sources, > clocks. > > Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> > --- > arch/arm/boot/dts/imx6qdl.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi > index 53e6e63..42926e9 100644 > --- a/arch/arm/boot/dts/imx6qdl.dtsi > +++ b/arch/arm/boot/dts/imx6qdl.dtsi > @@ -1125,7 +1125,14 @@ > }; > > mipi_csi: mipi@021dc000 { > + compatible = "fsl,imx6-mipi-csi2"; > reg = <0x021dc000 0x4000>; > + interrupts = <0 100 0x04>, <0 101 0x04>; > + clocks = <&clks IMX6QDL_CLK_HSI_TX>, > + <&clks IMX6QDL_CLK_VIDEO_27M>, > + <&clks IMX6QDL_CLK_EIM_SEL>;
I think the latter should be EIM_PODF
> + clock-names = "dphy", "cfg", "pix";
and I'm not sure dphy is the right name for this one. Is that the pll ref input?
> + status = "disabled"; > }; > > mipi_dsi: mipi@021e0000 {
regards Philipp
|