lkml.org 
[lkml]   [2017]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 30/37] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode
    Date
    Update device tree binding documentation of TI's dra7xx PCI
    controller to include property for enabling legacy mode.

    Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
    ---
    Documentation/devicetree/bindings/pci/ti-pci.txt | 4 ++++
    1 file changed, 4 insertions(+)

    diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
    index 62f5f59..ed85e8e 100644
    --- a/Documentation/devicetree/bindings/pci/ti-pci.txt
    +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
    @@ -39,6 +39,10 @@ DEVICE MODE
    - interrupts : one interrupt entries must be specified for main interrupt.
    - num-ib-windows : number of inbound address translation windows
    - num-ob-windows : number of outbound address translation windows
    + - syscon-legacy-mode: phandle to the syscon dt node. The 1st argument should
    + contain the register offset within syscon and the 2nd
    + argument should contain the bit field for setting the
    + legacy mode

    Optional Property:
    - gpios : Should be added if a gpio line is required to drive PERST# line
    --
    1.7.9.5
    \
     
     \ /
      Last update: 2017-01-12 11:37    [W:4.142 / U:0.380 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site