lkml.org 
[lkml]   [2017]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] platform/x86: Add IMS/ZII SCU driver
Date
From: Guenter Roeck <linux@roeck-us.net>

This patch adds support for the IMS (now Zodiac Inflight Innovations)
SCU Generation 1/2/3 platform driver. This driver registers all the
on-module peripherals: Ethernet switches (Broadcom or Marvell), I2C to
GPIO expanders, Kontrom CPLD/I2C master, and more.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
Darren,

This is against your "for-next" branch thanks!

drivers/platform/x86/Kconfig | 6 +
drivers/platform/x86/Makefile | 2 +
drivers/platform/x86/scu.c | 1626 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 1634 insertions(+)
create mode 100644 drivers/platform/x86/scu.c

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 5fe8be089b8b..3b3e0cb4b45b 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -375,6 +375,12 @@ config SURFACE3_WMI
To compile this driver as a module, choose M here: the module will
be called surface3-wmi.

+config SCU
+ tristate "SCU driver"
+ depends on DMI
+ ---help---
+ Enable SCU driver
+
config THINKPAD_ACPI
tristate "ThinkPad ACPI Laptop Extras"
depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index d4111f0f8a78..06d71af65ce8 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -37,6 +37,8 @@ obj-$(CONFIG_MSI_WMI) += msi-wmi.o
obj-$(CONFIG_SURFACE3_WMI) += surface3-wmi.o
obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o

+obj-$(CONFIG_SCU) += scu.o
+
# toshiba_acpi must link after wmi to ensure that wmi devices are found
# before toshiba_acpi initializes
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
diff --git a/drivers/platform/x86/scu.c b/drivers/platform/x86/scu.c
new file mode 100644
index 000000000000..30e438061947
--- /dev/null
+++ b/drivers/platform/x86/scu.c
@@ -0,0 +1,1626 @@
+/*
+ * SCU board driver
+ *
+ * Copyright (c) 2012, 2014 Guenter Roeck <linux@roeck-us.net>
+ * Copyright (C) 2016 Zodiac Inflight Innovations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/leds.h>
+#include <linux/platform_data/mdio-gpio.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/version.h>
+#include <linux/platform_data/at24.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/nvmem-consumer.h>
+#include <net/dsa.h>
+#include <asm/processor.h>
+#include <asm/byteorder.h>
+
+#define SCU_EXT_GPIO_BASE(x) (0 + (x) * 8)
+#define SCU_EXT_GPIO(chip, x) (SCU_EXT_GPIO_BASE(chip) + (x))
+
+/* Front panel LEDs */
+#define SCU_RD_LED_GPIO SCU_EXT_GPIO(1, 0)
+#define SCU_WLES_LED_GPIO SCU_EXT_GPIO(1, 1)
+#define SCU_LD_FAIL_LED_GPIO SCU_EXT_GPIO(1, 2)
+/* shared control with PIC */
+#define SCU_SW_LED_GPIO SCU_EXT_GPIO(1, 3)
+
+#define SCU_SD_ACTIVE_1_GPIO SCU_EXT_GPIO(2, 0)
+#define SCU_SD_ERROR_1_GPIO SCU_EXT_GPIO(2, 1)
+#define SCU_SD_ACTIVE_2_GPIO SCU_EXT_GPIO(2, 2)
+#define SCU_SD_ERROR_2_GPIO SCU_EXT_GPIO(2, 3)
+#define SCU_SD_ACTIVE_3_GPIO SCU_EXT_GPIO(2, 4)
+#define SCU_SD_ERROR_3_GPIO SCU_EXT_GPIO(2, 5)
+
+#define SCU_SD_ACTIVE_4_GPIO SCU_EXT_GPIO(3, 0)
+#define SCU_SD_ERROR_4_GPIO SCU_EXT_GPIO(3, 1)
+#define SCU_SD_ACTIVE_5_GPIO SCU_EXT_GPIO(3, 2)
+#define SCU_SD_ERROR_5_GPIO SCU_EXT_GPIO(3, 3)
+#define SCU_SD_ACTIVE_6_GPIO SCU_EXT_GPIO(3, 4)
+#define SCU_SD_ERROR_6_GPIO SCU_EXT_GPIO(3, 5)
+
+struct __packed eeprom_data {
+ unsigned short length; /* 0 - 1 */
+ unsigned char checksum; /* 2 */
+ unsigned char have_gsm_modem; /* 3 */
+ unsigned char have_cdma_modem; /* 4 */
+ unsigned char have_wifi_modem; /* 5 */
+ unsigned char have_rhdd; /* 6 */
+ unsigned char have_dvd; /* 7 */
+ unsigned char have_tape; /* 8 */
+ unsigned char have_humidity_sensor; /* 9 */
+ unsigned char have_fiber_channel; /* 10 */
+ unsigned char lru_part_number[11]; /* 11 - 21 Box Part Number */
+ unsigned char lru_revision[7]; /* 22 - 28 Box Revision */
+ unsigned char lru_serial_number[7]; /* 29 - 35 Box Serial Number */
+ unsigned char lru_date_of_manufacture[7];
+ /* 36 - 42 Box Date of Manufacture */
+ unsigned char board_part_number[11];
+ /* 43 - 53 Base Board Part Number */
+ unsigned char board_revision[7];
+ /* 54 - 60 Base Board Revision */
+ unsigned char board_serial_number[7];
+ /* 61 - 67 Base Board Serial Number */
+ unsigned char board_date_of_manufacture[7];
+ /* 68 - 74 Base Board Date of Manufacture */
+ unsigned char board_updated_date_of_manufacture[7];
+ /* 75 - 81 Updated Box Date of Manufacture */
+ unsigned char board_updated_revision[7];
+ /* 82 - 88 Updated Box Revision */
+ unsigned char dummy[7]; /* 89 - 95 spare/filler */
+};
+
+enum scu_version { scu1, scu2, scu3, unknown };
+
+struct scu_data;
+
+struct scu_platform_data {
+ const char *board_type;
+ const char *lru_part_number;
+ const char *board_part_number;
+ enum scu_version version;
+ int eeprom_len;
+ struct i2c_board_info *i2c_board_info;
+ int num_i2c_board_info;
+ struct spi_board_info *spi_board_info;
+ int num_spi_board_info;
+ void (*init)(struct scu_data *);
+ void (*remove)(struct scu_data *);
+};
+
+struct scu_data {
+ struct device *dev; /* SCU platform device */
+ struct net_device *netdev; /* Ethernet device */
+ struct platform_device *mdio_dev; /* MDIO device */
+ struct platform_device *dsa_dev; /* DSA device */
+ struct proc_dir_entry *rave_proc_dir;
+ struct mutex write_lock;
+ struct platform_device *leds_pdev[3];
+ struct i2c_adapter *adapter; /* I2C adapter */
+ struct spi_master *master; /* SPI master */
+ struct i2c_client *client[10]; /* I2C clients */
+ struct spi_device *spidev[1]; /* SPI devices */
+ const struct scu_platform_data *pdata;
+ bool have_write_magic;
+ struct eeprom_data eeprom;
+ struct nvmem_device *nvmem;
+ bool eeprom_accessible;
+ bool eeprom_valid;
+};
+
+#define SCU_EEPROM_LEN_EEPROM 36
+#define SCU_EEPROM_LEN_GEN1 36
+#define SCU_EEPROM_LEN_GEN2 75
+#define SCU_EEPROM_LEN_GEN3 75 /* Preliminary */
+
+#define SCU_LRU_PARTNUM_GEN1 "00-5001"
+#define SCU_LRU_PARTNUM_GEN2 "00-5010"
+#define SCU_LRU_PARTNUM_GEN3 "00-5013"
+
+#define SCU_ZII_BOARD_PARTNUM "05-0041"
+
+#define SCU_WRITE_MAGIC 5482328594ULL
+
+/* sysfs */
+
+unsigned char scu_get_checksum(unsigned char *ptr, int len)
+{
+ unsigned char checksum = 0;
+ int i;
+
+ for (i = 0; i < len; i++)
+ checksum += ptr[i];
+ return checksum;
+}
+
+static int scu_update_checksum(struct scu_data *data)
+{
+ unsigned char checksum;
+ int ret;
+
+ data->eeprom.checksum = 0;
+ checksum = scu_get_checksum((unsigned char *)&data->eeprom,
+ data->pdata->eeprom_len);
+ data->eeprom.checksum = ~checksum + 1;
+ ret = nvmem_device_write(data->nvmem,
+ 0x300 + offsetof(struct eeprom_data, checksum),
+ sizeof(data->eeprom.checksum),
+ &data->eeprom.checksum);
+ if (ret <= 0)
+ return ret < 0 ? ret : -EIO;
+ return 0;
+}
+
+static ssize_t board_type_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", data->pdata->board_type);
+}
+
+static ssize_t attribute_magic_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", data->have_write_magic);
+}
+
+static ssize_t attribute_magic_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+ unsigned long long magic;
+ int err;
+
+ err = kstrtoull(buf, 10, &magic);
+ if (err)
+ return err;
+
+ data->have_write_magic = magic == SCU_WRITE_MAGIC;
+
+ return count;
+}
+
+static ssize_t scu_object_show(char *buf, char *data, int len)
+{
+ return snprintf(buf, PAGE_SIZE, "%.*s\n", len, data);
+}
+
+static ssize_t scu_object_store(struct scu_data *data, int offset,
+ const char *in, char *out, ssize_t len)
+{
+ char buffer[12] = { 0 };
+ char *cp;
+ int ret;
+
+ if (!data->have_write_magic)
+ return -EACCES;
+
+ strlcpy(buffer, in, sizeof(buffer));
+ /* do not copy newline from input string */
+ cp = strchr(buffer, '\n');
+ if (cp)
+ *cp = '\0';
+
+ if (len > sizeof(buffer))
+ len = sizeof(buffer);
+
+ mutex_lock(&data->write_lock);
+ strncpy(out, buffer, len);
+
+ /* Write entire eeprom if it was marked invalid */
+ if (!data->eeprom_valid) {
+ offset = 0;
+ /* Write checksumed and non checksumed data */
+ len = sizeof(data->eeprom);
+ out = (char *)&data->eeprom;
+ }
+
+ ret = nvmem_device_write(data->nvmem, 0x300 + offset, len, out);
+ if (ret <= 0) {
+ data->eeprom_valid = false;
+ if (ret == 0)
+ ret = -EIO;
+ goto error;
+ }
+ if (offset < data->pdata->eeprom_len) {
+ /*
+ * Write to checksummed area of eeprom
+ * Update checksum
+ */
+ ret = scu_update_checksum(data);
+ if (ret < 0) {
+ data->eeprom_valid = false;
+ goto error;
+ }
+ }
+ data->eeprom_valid = true;
+error:
+ mutex_unlock(&data->write_lock);
+ return ret;
+}
+
+static ssize_t lru_part_number_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return scu_object_show(buf, data->eeprom.lru_part_number,
+ sizeof(data->eeprom.lru_part_number));
+}
+
+static ssize_t lru_part_number_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = scu_object_store(data,
+ offsetof(struct eeprom_data, lru_part_number),
+ buf, data->eeprom.lru_part_number,
+ sizeof(data->eeprom.lru_part_number));
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t lru_serial_number_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return scu_object_show(buf, data->eeprom.lru_serial_number,
+ sizeof(data->eeprom.lru_serial_number));
+}
+
+static ssize_t lru_serial_number_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = scu_object_store(data,
+ offsetof(struct eeprom_data, lru_serial_number),
+ buf, data->eeprom.lru_serial_number,
+ sizeof(data->eeprom.lru_serial_number));
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t lru_revision_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return scu_object_show(buf, data->eeprom.lru_revision,
+ sizeof(data->eeprom.lru_revision));
+}
+
+static ssize_t lru_revision_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = scu_object_store(data,
+ offsetof(struct eeprom_data, lru_revision),
+ buf, data->eeprom.lru_revision,
+ sizeof(data->eeprom.lru_revision));
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t lru_date_of_manufacture_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return scu_object_show(buf, data->eeprom.lru_date_of_manufacture,
+ sizeof(data->eeprom.lru_date_of_manufacture));
+}
+
+static ssize_t lru_date_of_manufacture_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = scu_object_store(data,
+ offsetof(struct eeprom_data,
+ lru_date_of_manufacture),
+ buf, data->eeprom.lru_date_of_manufacture,
+ sizeof(data->eeprom.lru_date_of_manufacture));
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t board_part_number_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return scu_object_show(buf, data->eeprom.board_part_number,
+ sizeof(data->eeprom.board_part_number));
+}
+
+static ssize_t board_part_number_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = scu_object_store(data,
+ offsetof(struct eeprom_data, board_part_number),
+ buf, data->eeprom.board_part_number,
+ sizeof(data->eeprom.board_part_number));
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t board_serial_number_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return scu_object_show(buf, data->eeprom.board_serial_number,
+ sizeof(data->eeprom.board_serial_number));
+}
+
+static ssize_t board_serial_number_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = scu_object_store(data,
+ offsetof(struct eeprom_data, board_serial_number),
+ buf, data->eeprom.board_serial_number,
+ sizeof(data->eeprom.board_serial_number));
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t board_revision_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return scu_object_show(buf, data->eeprom.board_revision,
+ sizeof(data->eeprom.board_revision));
+}
+
+static ssize_t board_revision_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = scu_object_store(data,
+ offsetof(struct eeprom_data, board_revision),
+ buf, data->eeprom.board_revision,
+ sizeof(data->eeprom.board_revision));
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t board_date_of_manufacture_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return scu_object_show(buf, data->eeprom.board_date_of_manufacture,
+ sizeof(data->eeprom.board_date_of_manufacture));
+}
+
+static ssize_t board_date_of_manufacture_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = scu_object_store(data,
+ offsetof(struct eeprom_data,
+ board_date_of_manufacture),
+ buf, data->eeprom.board_date_of_manufacture,
+ sizeof(data->eeprom.board_date_of_manufacture));
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t
+board_updated_revision_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return scu_object_show(buf, data->eeprom.board_updated_revision,
+ sizeof(data->eeprom.board_updated_revision));
+}
+
+static ssize_t
+board_updated_revision_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = scu_object_store(data,
+ offsetof(struct eeprom_data,
+ board_updated_revision),
+ buf, data->eeprom.board_updated_revision,
+ sizeof(data->eeprom.board_updated_revision));
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t
+board_updated_date_of_manufacture_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ return scu_object_show(buf,
+ data->eeprom.board_updated_date_of_manufacture,
+ sizeof(data->eeprom.board_updated_date_of_manufacture));
+}
+
+static ssize_t
+board_updated_date_of_manufacture_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct scu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = scu_object_store(data,
+ offsetof(struct eeprom_data,
+ board_updated_date_of_manufacture),
+ buf, data->eeprom.board_updated_date_of_manufacture,
+ sizeof(data->eeprom.board_updated_date_of_manufacture));
+ return ret < 0 ? ret : count;
+}
+
+static DEVICE_ATTR_RO(board_type);
+static DEVICE_ATTR_RW(attribute_magic);
+static DEVICE_ATTR_RW(lru_part_number);
+static DEVICE_ATTR_RW(lru_serial_number);
+static DEVICE_ATTR_RW(lru_revision);
+static DEVICE_ATTR_RW(lru_date_of_manufacture); /* SCU2/SCU3 only */
+static DEVICE_ATTR_RW(board_part_number); /* SCU2/SCU3 only */
+static DEVICE_ATTR_RW(board_serial_number); /* SCU2/SCU3 only */
+static DEVICE_ATTR_RW(board_revision); /* SCU2/SCU3 only */
+static DEVICE_ATTR_RW(board_date_of_manufacture); /* SCU2/SCU3 only */
+static DEVICE_ATTR_RW(board_updated_revision); /* SCU2/SCU3 only */
+static DEVICE_ATTR_RW(board_updated_date_of_manufacture); /* SCU2/SCU3 only */
+
+static struct attribute *scu_base_attrs[] = {
+ &dev_attr_board_type.attr,
+ NULL,
+};
+
+static struct attribute_group scu_base_group = {
+ .attrs = scu_base_attrs,
+};
+
+static struct attribute *scu_eeprom_attrs[] = {
+ &dev_attr_attribute_magic.attr,
+ &dev_attr_lru_part_number.attr, /* 1 */
+ &dev_attr_lru_serial_number.attr,
+ &dev_attr_lru_revision.attr,
+ &dev_attr_lru_date_of_manufacture.attr, /* 4 */
+ &dev_attr_board_part_number.attr,
+ &dev_attr_board_serial_number.attr,
+ &dev_attr_board_revision.attr,
+ &dev_attr_board_date_of_manufacture.attr,
+ &dev_attr_board_updated_revision.attr,
+ &dev_attr_board_updated_date_of_manufacture.attr,
+ NULL
+};
+
+static umode_t scu_attr_is_visible(struct kobject *kobj, struct attribute *attr,
+ int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct scu_data *data = dev_get_drvdata(dev);
+ umode_t mode = attr->mode;
+
+ /*
+ * If the eeprom has not been processed, disable its attributes.
+ * If it has been processed but is not accessible, disable
+ * write accesses to it.
+ */
+ if (index >= 1 && !data->eeprom_accessible)
+ mode &= 0444;
+
+ if (index >= 4 && data->pdata->version == scu1)
+ return 0;
+
+ return mode;
+}
+
+static struct attribute_group scu_eeprom_group = {
+ .attrs = scu_eeprom_attrs,
+ .is_visible = scu_attr_is_visible,
+};
+
+#define SCU_EEPROM_TEST_SCRATCHPAD_SIZE 32
+
+static ssize_t scu_eeprom_test_scratchpad_read(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buf, loff_t off,
+ size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ if (count == 0)
+ return 0;
+
+ if (off >= attr->size)
+ return -EFBIG;
+
+ if (off + count >= SCU_EEPROM_TEST_SCRATCHPAD_SIZE)
+ count = SCU_EEPROM_TEST_SCRATCHPAD_SIZE - off;
+
+ return nvmem_device_read(data->nvmem, off, count, buf);
+}
+
+static ssize_t scu_eeprom_test_scratchpad_write(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buf, loff_t off,
+ size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct scu_data *data = dev_get_drvdata(dev);
+
+ if (count == 0)
+ return 0;
+
+ if (off >= attr->size)
+ return -EFBIG;
+
+ if (off + count >= SCU_EEPROM_TEST_SCRATCHPAD_SIZE)
+ count = SCU_EEPROM_TEST_SCRATCHPAD_SIZE - off;
+
+ return nvmem_device_write(data->nvmem, off, count, buf);
+}
+
+/* base offset for 32 byte "eeprom_test_scratchpad" file is 0 */
+
+static struct bin_attribute scu_eeprom_test_scratchpad_file = {
+ .attr = {
+ .name = "eeprom_test_scratchpad",
+ .mode = 0644,
+ },
+ .size = SCU_EEPROM_TEST_SCRATCHPAD_SIZE,
+ .read = scu_eeprom_test_scratchpad_read,
+ .write = scu_eeprom_test_scratchpad_write,
+};
+
+/* platform data */
+
+static struct gpio_led pca_gpio_leds1[] = {
+ { /* bit 0 */
+ .name = "scu_status:g:RD",
+ .gpio = SCU_RD_LED_GPIO,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 1 */
+ .name = "scu_status:a:WLess",
+ .gpio = SCU_WLES_LED_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 2 */
+ .name = "scu_status:r:LDFail",
+ .gpio = SCU_LD_FAIL_LED_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 3 */
+ .name = "scu_status:a:SW",
+ .gpio = SCU_SW_LED_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }
+};
+
+static struct gpio_led_platform_data pca_gpio_led_info1 = {
+ .leds = pca_gpio_leds1,
+ .num_leds = ARRAY_SIZE(pca_gpio_leds1),
+};
+
+static struct gpio_led pca_gpio_leds2[] = {
+ { /* bit 0 */
+ .name = "SD1:g:active",
+ .gpio = SCU_SD_ACTIVE_1_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 1 */
+ .name = "SD1:a:error",
+ .gpio = SCU_SD_ERROR_1_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 2 */
+ .name = "SD2:g:active",
+ .gpio = SCU_SD_ACTIVE_2_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 3 */
+ .name = "SD2:a:error",
+ .gpio = SCU_SD_ERROR_2_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 4 */
+ .name = "SD3:g:active",
+ .gpio = SCU_SD_ACTIVE_3_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 5 */
+ .name = "SD3:a:error",
+ .gpio = SCU_SD_ERROR_3_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }
+};
+
+static struct gpio_led_platform_data pca_gpio_led_info2 = {
+ .leds = pca_gpio_leds2,
+ .num_leds = ARRAY_SIZE(pca_gpio_leds2),
+};
+
+static struct gpio_led pca_gpio_leds3[] = {
+ { /* bit 0 */
+ .name = "SD4:g:active",
+ .gpio = SCU_SD_ACTIVE_4_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 1 */
+ .name = "SD4:a:error",
+ .gpio = SCU_SD_ERROR_4_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 2 */
+ .name = "SD5:g:active",
+ .gpio = SCU_SD_ACTIVE_5_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 3 */
+ .name = "SD5:a:error",
+ .gpio = SCU_SD_ERROR_5_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 4 */
+ .name = "SD6:g:active",
+ .gpio = SCU_SD_ACTIVE_6_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ { /* bit 5 */
+ .name = "SD6:a:error",
+ .gpio = SCU_SD_ERROR_6_GPIO,
+ .active_low = 1,
+ .default_trigger = "none",
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }
+};
+
+static struct gpio_led_platform_data pca_gpio_led_info3 = {
+ .leds = pca_gpio_leds3,
+ .num_leds = ARRAY_SIZE(pca_gpio_leds3),
+};
+
+static void pca_leds_register(struct device *parent,
+ struct scu_data *data)
+{
+ data->leds_pdev[0] =
+ platform_device_register_data(parent, "leds-gpio", 1,
+ &pca_gpio_led_info1,
+ sizeof(pca_gpio_led_info1));
+ data->leds_pdev[1] =
+ platform_device_register_data(parent, "leds-gpio", 2,
+ &pca_gpio_led_info2,
+ sizeof(pca_gpio_led_info2));
+ data->leds_pdev[2] =
+ platform_device_register_data(parent, "leds-gpio", 3,
+ &pca_gpio_led_info3,
+ sizeof(pca_gpio_led_info3));
+}
+
+static void pca_leds_unregister(struct scu_data *data)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(data->leds_pdev); i++)
+ platform_device_unregister(data->leds_pdev[i]);
+}
+
+static const char *pca9538_ext0_gpio_names[8] = {
+ "pca9538_ext0:wireless_ena_1",
+ "pca9538_ext0:wireless_ena_2",
+ "pca9538_ext0:wireless_a_radio_disable",
+ "pca9538_ext0:wireless_a_reset",
+ "pca9538_ext0:in_spare_1",
+ "pca9538_ext0:in_spare_2",
+ "pca9538_ext0:wireless_b_radio_disable",
+ "pca9538_ext0:wireless_b_reset",
+};
+
+static const char *pca9538_ext1_gpio_names[8] = {
+ "pca9538_ext1:rd_led_on",
+ "pca9538_ext1:wless_led_on",
+ "pca9538_ext1:ld_fail_led_on",
+ "pca9538_ext1:sw_led_on",
+ "pca9538_ext1:discrete_out_1",
+ "pca9538_ext1:discrete_out_2",
+ "pca9538_ext1:discrete_out_3",
+ "pca9538_ext1:discrete_out_4",
+};
+
+static const char *pca9538_ext2_gpio_names[8] = {
+ "pca9538_ext2:sd_active_1",
+ "pca9538_ext2:sd_error_1",
+ "pca9538_ext2:sd_active_2",
+ "pca9538_ext2:sd_error_2",
+ "pca9538_ext2:sd_active_3",
+ "pca9538_ext2:sd_error_3",
+ "pca9538_ext2:hub_6_reset",
+ "pca9538_ext2:hub_6_config_status",
+};
+
+static const char *pca9538_ext3_gpio_names[8] = {
+ "pca9538_ext3:sd_active_4",
+ "pca9538_ext3:sd_error_4",
+ "pca9538_ext3:sd_active_5",
+ "pca9538_ext3:sd_error_5",
+ "pca9538_ext3:sd_active_6",
+ "pca9538_ext3:sd_error_6",
+ "pca9538_ext3:hub_2_reset",
+ "pca9538_ext3:hub_2_config_status",
+};
+
+static const char *pca9557_gpio_names[8] = {
+ "pca9557:sd_card_detect_1",
+ "pca9557:sd_card_detect_2",
+ "pca9557:sd_card_detect_3",
+ "pca9557:sd_card_detect_4",
+ "pca9557:sd_card_detect_5",
+ "pca9557:sd_card_detect_6",
+ "pca9557:spare1",
+ "pca9557:spare2",
+};
+
+static int scu_gpio_common_setup(unsigned int gpio_base, unsigned int ngpio,
+ u32 mask, u32 is_input, u32 is_active,
+ u32 active_low)
+{
+ int i;
+ unsigned long flags;
+
+ for (i = 0; i < ngpio; i++) {
+ if (!(mask & (1 << i)))
+ continue;
+ flags = GPIOF_EXPORT_DIR_FIXED;
+ if (is_input & (1 << i)) {
+ flags |= GPIOF_DIR_IN;
+ } else {
+ flags |= GPIOF_DIR_OUT;
+ if (is_active & (1 << i))
+ flags |= GPIOF_INIT_HIGH;
+ }
+ if (active_low & (1 << i))
+ flags |= GPIOF_ACTIVE_LOW;
+ gpio_request_one(gpio_base + i, flags, NULL);
+ }
+ return 0;
+}
+
+static int pca9538_ext0_setup(struct i2c_client *client,
+ unsigned int gpio_base, unsigned int ngpio,
+ void *context)
+{
+ scu_gpio_common_setup(gpio_base, ngpio, 0xff, 0x33, 0xcc, 0x00);
+ return 0;
+}
+
+static int pca9538_ext1_setup(struct i2c_client *client,
+ unsigned int gpio_base, unsigned int ngpio,
+ void *context)
+{
+ scu_gpio_common_setup(gpio_base, ngpio, 0xf0, 0x00, 0x00, 0x00);
+ return 0;
+}
+
+static int pca9538_ext2_setup(struct i2c_client *client,
+ unsigned int gpio_base, unsigned int ngpio,
+ void *context)
+{
+ scu_gpio_common_setup(gpio_base, ngpio, 0xc0, 0x80, 0x40, 0x00);
+ return 0;
+}
+
+static int pca9538_ext3_setup(struct i2c_client *client,
+ unsigned int gpio_base, unsigned int ngpio,
+ void *context)
+{
+ scu_gpio_common_setup(gpio_base, ngpio, 0xc0, 0x80, 0x40, 0x00);
+ return 0;
+}
+
+static int pca9557_setup(struct i2c_client *client,
+ unsigned int gpio_base, unsigned int ngpio,
+ void *context)
+{
+ scu_gpio_common_setup(gpio_base, ngpio, 0x3f, 0x3f, 0x00, 0x3f);
+ return 0;
+}
+
+static void scu_gpio_common_teardown(unsigned int gpio_base, int ngpio,
+ u32 mask)
+{
+ int i;
+
+ for (i = 0; i < ngpio; i++) {
+ if (mask & (1 << i)) {
+ gpio_unexport(gpio_base + i);
+ gpio_free(gpio_base + i);
+ }
+ }
+}
+
+static int pca9538_ext0_teardown(struct i2c_client *client,
+ unsigned int gpio_base, unsigned int ngpio,
+ void *context)
+{
+ scu_gpio_common_teardown(gpio_base, ngpio, 0xff);
+ return 0;
+}
+
+static int pca9538_ext1_teardown(struct i2c_client *client,
+ unsigned int gpio_base, unsigned int ngpio,
+ void *context)
+{
+ scu_gpio_common_teardown(gpio_base, ngpio, 0xf0);
+ return 0;
+}
+
+static int pca9538_ext2_teardown(struct i2c_client *client,
+ unsigned int gpio_base, unsigned int ngpio,
+ void *context)
+{
+ scu_gpio_common_teardown(gpio_base, ngpio, 0xc0);
+ return 0;
+}
+
+static int pca9538_ext3_teardown(struct i2c_client *client,
+ unsigned int gpio_base, unsigned int ngpio,
+ void *context)
+{
+ scu_gpio_common_teardown(gpio_base, ngpio, 0xc0);
+ return 0;
+}
+
+static int pca9557_teardown(struct i2c_client *client,
+ unsigned int gpio_base, unsigned int ngpio,
+ void *context)
+{
+ scu_gpio_common_teardown(gpio_base, ngpio, 0x3f);
+ return 0;
+}
+
+static int scu_gpiochip_match_name(struct gpio_chip *chip, void *data)
+{
+ return !strcmp(chip->label, data);
+}
+
+static struct gpio_chip *scu_find_chip_by_name(const char *name)
+{
+ return gpiochip_find((void *)name, scu_gpiochip_match_name);
+}
+
+static struct pca953x_platform_data scu_pca953x_pdata[] = {
+ [0] = {.gpio_base = SCU_EXT_GPIO_BASE(0),
+ .irq_base = -1,
+ .setup = pca9538_ext0_setup,
+ .teardown = pca9538_ext0_teardown,
+ .names = pca9538_ext0_gpio_names},
+ [1] = {.gpio_base = SCU_EXT_GPIO_BASE(1),
+ .irq_base = -1,
+ .setup = pca9538_ext1_setup,
+ .teardown = pca9538_ext1_teardown,
+ .names = pca9538_ext1_gpio_names},
+ [2] = {.gpio_base = SCU_EXT_GPIO_BASE(2),
+ .irq_base = -1,
+ .setup = pca9538_ext2_setup,
+ .teardown = pca9538_ext2_teardown,
+ .names = pca9538_ext2_gpio_names},
+ [3] = {.gpio_base = SCU_EXT_GPIO_BASE(3),
+ .irq_base = -1,
+ .setup = pca9538_ext3_setup,
+ .teardown = pca9538_ext3_teardown,
+ .names = pca9538_ext3_gpio_names},
+ [4] = {.gpio_base = SCU_EXT_GPIO_BASE(4),
+ .irq_base = -1,
+ .setup = pca9557_setup,
+ .teardown = pca9557_teardown,
+ .names = pca9557_gpio_names},
+};
+
+static struct i2c_board_info scu_i2c_info_scu3[] = {
+ { I2C_BOARD_INFO("pca9538", 0x70),
+ .platform_data = &scu_pca953x_pdata[0],},
+ { I2C_BOARD_INFO("pca9557", 0x1b),
+ .platform_data = &scu_pca953x_pdata[4],},
+};
+
+static void pch_gpio_setup(struct scu_data *data)
+{
+ struct gpio_chip *chip = scu_find_chip_by_name("gpio_ich");
+ struct mdio_gpio_platform_data pdata = { };
+
+ scu_pca953x_pdata[0].irq_base = -1;
+ scu_i2c_info_scu3[0].irq = 0;
+ if (chip) {
+ int irq = gpio_to_irq(chip->base + 1); /* GPI1 */
+
+ if (irq > 0) {
+ scu_pca953x_pdata[0].irq_base = 0;
+ scu_i2c_info_scu3[0].irq = irq;
+ }
+
+ pdata.mdc = chip->base + 17; /* GPO1 */
+ pdata.mdo = chip->base + 21; /* GPO2 */
+ pdata.mdo_active_low = true;
+ pdata.mdio = chip->base + 2; /* GPI2 */
+
+ data->mdio_dev = platform_device_register_data(&platform_bus,
+ "mdio-gpio", 0,
+ &pdata,
+ sizeof(pdata));
+ if (IS_ERR(data->mdio_dev)) {
+ dev_err(data->dev, "Failed to register MDIO device\n");
+ data->mdio_dev = NULL;
+ }
+ /* generic: 0, 3 (input), 16, 20 (output) */
+ scu_gpio_common_setup(chip->base, 22, 0x110009, 0x00000b,
+ 0x100000, 0x0);
+ }
+}
+
+static void pch_gpio_teardown(struct scu_data *data)
+{
+ struct gpio_chip *chip = scu_find_chip_by_name("gpio_ich");
+
+ if (chip) {
+ platform_device_unregister(data->mdio_dev);
+ scu_gpio_common_teardown(chip->base, 22, 0x30000b);
+ }
+}
+
+static struct dsa_chip_data switch_chip_data = {
+ .eeprom_len = 0x200,
+ .port_names[0] = "cpu",
+ .port_names[1] = "port1",
+ .port_names[2] = "port2",
+ .port_names[3] = "port8",
+ .port_names[4] = "host2esb",
+ .port_names[5] = 0, /* unused */
+};
+
+static void scu_setup_ethernet_switch(struct scu_data *data)
+{
+ struct dsa_platform_data switch_data = {
+ .nr_chips = 1,
+ .chip = &switch_chip_data,
+ };
+
+ switch_data.netdev = &data->netdev->dev;
+ switch_chip_data.host_dev = &data->mdio_dev->dev;
+ data->dsa_dev = platform_device_register_data(&platform_bus, "dsa",
+ 0, &switch_data,
+ sizeof(switch_data));
+ if (IS_ERR(data->dsa_dev)) {
+ dev_err(data->dev, "Failed to register DSA device\n");
+ data->dsa_dev = NULL;
+ }
+}
+
+static void scu3_init(struct scu_data *data)
+{
+ pch_gpio_setup(data);
+ if (data->mdio_dev)
+ scu_setup_ethernet_switch(data);
+}
+
+static void scu3_remove(struct scu_data *data)
+{
+ pch_gpio_teardown(data);
+ platform_device_unregister(data->dsa_dev);
+}
+
+static struct i2c_board_info scu_i2c_info_scu2[] = {
+ { I2C_BOARD_INFO("sc18is602", 0x28)},
+ { I2C_BOARD_INFO("pca9538", 0x70),
+ .platform_data = &scu_pca953x_pdata[0],},
+};
+
+static struct spi_board_info scu_spi_info[] = {
+ {
+ .modalias = "b53-switch",
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 2000000,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct scu_platform_data scu_platform_data[] = {
+ [scu1] = {
+ .board_type = "SCU1 x86",
+ .lru_part_number = SCU_LRU_PARTNUM_GEN1,
+ .version = scu1,
+ .eeprom_len = SCU_EEPROM_LEN_GEN1,
+ .i2c_board_info = scu_i2c_info_scu2,
+ .num_i2c_board_info = ARRAY_SIZE(scu_i2c_info_scu2),
+ .spi_board_info = scu_spi_info,
+ .num_spi_board_info = ARRAY_SIZE(scu_spi_info),
+ },
+ [scu2] = {
+ .board_type = "SCU2 x86",
+ .lru_part_number = SCU_LRU_PARTNUM_GEN2,
+ .version = scu2,
+ .eeprom_len = SCU_EEPROM_LEN_GEN2,
+ .i2c_board_info = scu_i2c_info_scu2,
+ .num_i2c_board_info = ARRAY_SIZE(scu_i2c_info_scu2),
+ .spi_board_info = scu_spi_info,
+ .num_spi_board_info = ARRAY_SIZE(scu_spi_info),
+ },
+ [scu3] = {
+ .board_type = "SCU3 x86",
+ .lru_part_number = SCU_LRU_PARTNUM_GEN3,
+ .board_part_number = SCU_ZII_BOARD_PARTNUM,
+ .version = scu3,
+ .eeprom_len = SCU_EEPROM_LEN_GEN3,
+ .i2c_board_info = scu_i2c_info_scu3,
+ .num_i2c_board_info = ARRAY_SIZE(scu_i2c_info_scu3),
+ .init = scu3_init,
+ .remove = scu3_remove,
+ },
+ [unknown] = {
+ .board_type = "UNKNOWN",
+ .version = unknown,
+ .eeprom_len = SCU_EEPROM_LEN_GEN3,
+ .i2c_board_info = scu_i2c_info_scu3,
+ .num_i2c_board_info = ARRAY_SIZE(scu_i2c_info_scu3),
+ .init = scu3_init,
+ .remove = scu3_remove,
+ },
+};
+
+static int scu_instantiate_i2c(struct scu_data *data, int base,
+ struct i2c_board_info *info, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ data->client[base + i] = i2c_new_device(data->adapter, info);
+ if (!data->client[base + i]) {
+ /*
+ * Unfortunately this call does not tell us
+ * why it failed. Pick the most likely reason.
+ */
+ return -EBUSY;
+ }
+ info++;
+ }
+ return 0;
+}
+
+static int scu_instantiate_spi(struct scu_data *data,
+ struct spi_board_info *info, int count)
+{
+ struct spi_master *master;
+ int i;
+
+ /* SPI bus number matches i2c bus number (set by sc18is602 driver) */
+ master = spi_busnum_to_master(data->adapter->nr);
+ if (!master) {
+ dev_err(data->dev, "Failed to find SPI adapter\n");
+ return -ENODEV;
+ }
+ data->master = master;
+
+ for (i = 0; i < count; i++) {
+ info->bus_num = master->bus_num;
+ /* ignore errors */
+ data->spidev[i] = spi_new_device(master, info);
+ info++;
+ }
+ return 0;
+}
+
+static void populate_unit_info(struct nvmem_device *nvmem,
+ void *context);
+
+static struct at24_platform_data at24c08 = {
+ .byte_len = 1024,
+ .page_size = 16,
+ .setup = populate_unit_info,
+};
+
+static struct i2c_board_info scu_i2c_info_common[] = {
+ { I2C_BOARD_INFO("scu_pic", 0x20)},
+ { I2C_BOARD_INFO("at24", 0x54),
+ .platform_data = &at24c08},
+ { I2C_BOARD_INFO("ds1682", 0x6b)},
+ { I2C_BOARD_INFO("pca9538", 0x71),
+ .platform_data = &scu_pca953x_pdata[1],},
+ { I2C_BOARD_INFO("pca9538", 0x72),
+ .platform_data = &scu_pca953x_pdata[2],},
+ { I2C_BOARD_INFO("pca9538", 0x73),
+ .platform_data = &scu_pca953x_pdata[3],},
+};
+
+/*
+ * This is the callback function when a a specifc at24 eeprom is found.
+ * Its reads out the eeprom contents via the read function passed back in via
+ * struct memory_accessor. It then calls part_number_proc, serial_number_proc,
+ * and dom_proc to populate the procfs entries for each specific field.
+ */
+static void populate_unit_info(struct nvmem_device *nvmem,
+ void *context)
+{
+ const struct scu_platform_data *pdata = &scu_platform_data[unknown];
+ struct scu_data *data = context;
+ unsigned char *ptr;
+ int i, len;
+
+ data->nvmem = nvmem;
+
+ ptr = (unsigned char *)&data->eeprom;
+ /* Read Data structure from EEPROM */
+ if (nvmem_device_read(nvmem, 0x300, sizeof(data->eeprom), ptr) <= 0) {
+ dev_err(data->dev, "Failed to read eeprom data\n");
+ goto error;
+ }
+
+ /* EEPROM is accessible, permit write access to it */
+ data->eeprom_accessible = true;
+
+ /* Special case - eeprom not programmed */
+ if (data->eeprom.length == 0xffff && data->eeprom.checksum == 0xff) {
+ /* Assume it is SCU3, but report different board type */
+ memset(&data->eeprom, '\0', sizeof(data->eeprom));
+ data->eeprom.length = cpu_to_le16(SCU_EEPROM_LEN_EEPROM);
+ goto unprogrammed;
+ }
+
+ /* Sanity check */
+ if (le16_to_cpu(data->eeprom.length) != SCU_EEPROM_LEN_EEPROM) {
+ dev_err(data->dev,
+ "Bad eeprom data length: Expected %d, got %d\n",
+ SCU_EEPROM_LEN_EEPROM,
+ le16_to_cpu(data->eeprom.length));
+ goto error;
+ }
+
+ /* Update platform data based on part number retrieved from EEPROM */
+ for (i = 0; i < ARRAY_SIZE(scu_platform_data); i++) {
+ const struct scu_platform_data *tpdata = &scu_platform_data[i];
+
+ if (tpdata->lru_part_number == NULL)
+ continue;
+ if (!strncmp(data->eeprom.lru_part_number,
+ tpdata->lru_part_number,
+ strlen(tpdata->lru_part_number))) {
+ pdata = tpdata;
+ break;
+ }
+ }
+
+unprogrammed:
+ data->pdata = pdata;
+ /*
+ * We know as much as we will ever find out about the platform.
+ * Perform final platform initialization and instantiate additional
+ * I2C devices as well as SPI devices now, prior to validating
+ * the EEPROM checksum.
+ */
+ if (pdata->init)
+ pdata->init(data);
+
+ if (pdata->i2c_board_info)
+ scu_instantiate_i2c(data, ARRAY_SIZE(scu_i2c_info_common),
+ pdata->i2c_board_info,
+ pdata->num_i2c_board_info);
+
+ if (pdata->spi_board_info)
+ scu_instantiate_spi(data, pdata->spi_board_info,
+ pdata->num_spi_board_info);
+
+ len = data->pdata->eeprom_len;
+
+ /* Validate checksum */
+ if (scu_get_checksum(ptr, len)) {
+ dev_err(data->dev,
+ "EEPROM data checksum error: expected 0, got 0x%x [len=%d]\n",
+ scu_get_checksum(ptr, len), len);
+ /* TBD: Do we want to clear the eeprom in this case ? */
+ goto error_noclean;
+ }
+
+ /* Create sysfs attributes based on retrieved platform data */
+ data->eeprom_valid = true;
+ goto done;
+
+error:
+ memset(&data->eeprom, '\0', sizeof(data->eeprom));
+ data->eeprom.length = cpu_to_le16(SCU_EEPROM_LEN_EEPROM);
+error_noclean:
+ data->eeprom_valid = false;
+done:
+ if (sysfs_create_group(&data->dev->kobj, &scu_eeprom_group))
+ ;
+ if (sysfs_create_bin_file(&data->dev->kobj,
+ &scu_eeprom_test_scratchpad_file))
+ ;
+}
+
+static int scu_i2c_adap_name_match(struct device *dev, void *data)
+{
+ struct i2c_adapter *adap = i2c_verify_adapter(dev);
+
+ if (!adap)
+ return false;
+
+ return !strcmp(adap->name, (char *)data);
+}
+
+static struct i2c_adapter *scu_find_i2c_adapter(char *name)
+{
+ struct device *dev;
+ struct i2c_adapter *adap;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, name,
+ scu_i2c_adap_name_match);
+ if (!dev)
+ return NULL;
+
+ adap = i2c_verify_adapter(dev);
+ if (!adap)
+ put_device(dev);
+
+ return adap;
+}
+
+const char *scu_modules[] = {
+ "kempld-core",
+ "i2c-kempld",
+ "spi-sc18is602",
+ "lpc_ich",
+ "gpio_ich",
+ "mdio-gpio",
+ "dsa",
+ NULL
+};
+
+#ifdef CONFIG_MODULES
+static void scu_request_modules(bool wait)
+{
+ struct module *m;
+ int i;
+
+ /*
+ * Try to load modules which we are going to need later on.
+ * Fail silently; if loading the module is not successful
+ * we'll bail out later on.
+ */
+ for (i = 0; scu_modules[i]; i++) {
+ mutex_lock(&module_mutex);
+ m = find_module(scu_modules[i]);
+ mutex_unlock(&module_mutex);
+ if (!m) {
+ if (wait)
+ request_module(scu_modules[i]);
+ else
+ request_module_nowait(scu_modules[i]);
+ }
+ }
+}
+#else
+static inline void scu_request_modules(bool wait) { }
+#endif
+
+static int proc_board_type_show(struct seq_file *m, void *v)
+{
+ struct scu_data *data = (struct scu_data *)m->private;
+
+ seq_printf(m, "%s\n", data->pdata->board_type);
+
+ return 0;
+}
+
+static int scu_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, proc_board_type_show, PDE_DATA(inode));
+}
+
+static const struct file_operations scu_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = scu_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int scu_probe(struct platform_device *pdev)
+{
+ struct proc_dir_entry *rave_board_type;
+ struct device *dev = &pdev->dev;
+ struct i2c_adapter *adapter;
+ struct net_device *ndev;
+ struct scu_data *data;
+ int i, ret;
+
+ scu_request_modules(true);
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, data);
+
+ data->dev = dev;
+
+ mutex_init(&data->write_lock);
+
+ /* look for ethernet device attached to 'e1000e' driver */
+ rtnl_lock();
+ for_each_netdev(&init_net, ndev) {
+ if (ndev->dev.parent && ndev->dev.parent->driver &&
+ !strcmp(ndev->dev.parent->driver->name, "e1000e")) {
+ data->netdev = ndev;
+ break;
+ }
+ }
+ rtnl_unlock();
+
+ if (!data->netdev)
+ return -EPROBE_DEFER;
+
+ /*
+ * The adapter driver should have been loaded by now.
+ * If not, try again later.
+ */
+ adapter = scu_find_i2c_adapter("i2c-kempld");
+ if (!adapter) {
+ ret = -EPROBE_DEFER;
+ goto error_put_net;
+ }
+ data->adapter = adapter;
+
+ data->rave_proc_dir = proc_mkdir("rave", NULL);
+ if (!data->rave_proc_dir) {
+ ret = -ENODEV;
+ goto error_put;
+ }
+ rave_board_type = proc_create_data("board_type", 0, data->rave_proc_dir,
+ &scu_proc_fops, data);
+ if (rave_board_type == NULL) {
+ ret = -ENODEV;
+ goto error_remove;
+ }
+
+ at24c08.context = data;
+
+ ret = scu_instantiate_i2c(data, 0, scu_i2c_info_common,
+ ARRAY_SIZE(scu_i2c_info_common));
+ if (ret)
+ goto error_i2c_client;
+
+ pca_leds_register(dev, data);
+
+ ret = sysfs_create_group(&dev->kobj, &scu_base_group);
+ if (ret)
+ goto error_group;
+
+ return 0;
+
+error_group:
+ pca_leds_unregister(data);
+error_i2c_client:
+ for (i = 0; i < ARRAY_SIZE(data->client) && data->client[i]; i++)
+ i2c_unregister_device(data->client[i]);
+error_remove:
+ proc_remove(data->rave_proc_dir);
+error_put:
+ put_device(&adapter->dev);
+error_put_net:
+ dev_put(data->netdev);
+ return ret;
+}
+
+static int __exit scu_remove(struct platform_device *pdev)
+{
+ struct scu_data *data = platform_get_drvdata(pdev);
+ int i;
+
+ sysfs_remove_bin_file(&data->dev->kobj,
+ &scu_eeprom_test_scratchpad_file);
+ sysfs_remove_group(&pdev->dev.kobj, &scu_eeprom_group);
+ sysfs_remove_group(&pdev->dev.kobj, &scu_base_group);
+
+ if (data->pdata && data->pdata->remove)
+ data->pdata->remove(data);
+
+ pca_leds_unregister(data);
+
+ for (i = 0; i < ARRAY_SIZE(data->spidev); i++)
+ spi_unregister_device(data->spidev[i]);
+ spi_master_put(data->master);
+
+ for (i = 0; i < ARRAY_SIZE(data->client) && data->client[i]; i++)
+ i2c_unregister_device(data->client[i]);
+
+ proc_remove(data->rave_proc_dir);
+
+ put_device(&data->adapter->dev);
+ dev_put(data->netdev);
+
+ return 0;
+}
+
+static struct platform_driver scu_driver = {
+ .probe = scu_probe,
+ .remove = __exit_p(scu_remove),
+ .driver = {
+ .name = "scu",
+ .owner = THIS_MODULE,
+ },
+};
+
+static struct platform_device *scu_pdev;
+
+static int scu_create_platform_device(const struct dmi_system_id *id)
+{
+ int ret;
+
+ scu_pdev = platform_device_alloc("scu", -1);
+ if (!scu_pdev)
+ return -ENOMEM;
+
+ ret = platform_device_add(scu_pdev);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ platform_device_put(scu_pdev);
+ return ret;
+}
+
+static const struct dmi_system_id scu_device_table[] __initconst = {
+ {
+ .ident = "IMS SCU version 1, Core 2 Duo",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "PXT"),
+ },
+ .callback = scu_create_platform_device,
+ },
+ {
+ .ident = "IMS SCU version 2, Ivy Bridge",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-bSC6"),
+ },
+ .callback = scu_create_platform_device,
+ },
+ {
+ .ident = "IMS SCU version 2, Ivy Bridge",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-bIP2"),
+ },
+ .callback = scu_create_platform_device,
+ },
+ {
+ .ident = "IMS SCU version 2, Sandy Bridge",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-bSC2"),
+ },
+ .callback = scu_create_platform_device,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(dmi, scu_device_table);
+
+static int __init scu_init(void)
+{
+ if (!dmi_check_system(scu_device_table))
+ return -ENODEV;
+
+ scu_request_modules(false);
+
+ return platform_driver_register(&scu_driver);
+}
+module_init(scu_init);
+
+static void __exit scu_exit(void)
+{
+ if (scu_pdev)
+ platform_device_unregister(scu_pdev);
+
+ platform_driver_unregister(&scu_driver);
+}
+module_exit(scu_exit);
+
+MODULE_ALIAS("platform:scu");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("IMS SCU platform driver");
+MODULE_DEVICE_TABLE(dmi, scu_device_table);
--
2.9.3
\
 
 \ /
  Last update: 2017-01-11 22:27    [W:0.151 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site