lkml.org 
[lkml]   [2017]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] PCI: thunder-pem: Add support for cn81xx and cn83xx SoCs.
Date
From: David Daney <david.daney@cavium.com>

The pci-thunder-pem driver was initially developed for cn88xx SoCs.
The cn81xx and cn83xx members of the same family of SoCs has a
slightly different configuration of interrupt resources in the PEM
hardware, which prevents the INTA legacy interrupt source from
functioning with the current driver.

There are two fixes required:

1) Don't fixup the PME interrupt on the newer SoCs as it already has
the proper value.

2) Report MSI-X Capability Table Size of 2 for the newer SoCs, so the
core MSI-X code doesn't inadvertently clobber the INTA machinery that
happens to reside immediately following the table.

Signed-off-by: David Daney <david.daney@cavium.com>
---

Changes from v1: Fixed comment typo.

drivers/pci/host/pci-thunder-pem.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index af722eb..52b5bdc 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -36,7 +36,7 @@ struct thunder_pem_pci {
static int thunder_pem_bridge_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
- u64 read_val;
+ u64 read_val, tmp_val;
struct pci_config_window *cfg = bus->sysdata;
struct thunder_pem_pci *pem_pci = (struct thunder_pem_pci *)cfg->priv;

@@ -65,13 +65,28 @@ static int thunder_pem_bridge_read(struct pci_bus *bus, unsigned int devfn,
read_val |= 0x00007000; /* Skip MSI CAP */
break;
case 0x70: /* Express Cap */
- /* PME interrupt on vector 2*/
- read_val |= (2u << 25);
+ /*
+ * Change PME interrupt to vector 2 on T88 where it
+ * reads as 0, else leave it alone.
+ */
+ if (!(read_val & (0x1f << 25)))
+ read_val |= (2u << 25);
break;
case 0xb0: /* MSI-X Cap */
- /* TableSize=4, Next Cap is EA */
+ /* TableSize=2 or 4, Next Cap is EA */
read_val &= 0xc00000ff;
- read_val |= 0x0003bc00;
+ /*
+ * If Express Cap(0x70) raw PME vector reads as 0 we are on
+ * T88 and TableSize is reported as 4, else TableSize
+ * is 2.
+ */
+ writeq(0x70, pem_pci->pem_reg_base + PEM_CFG_RD);
+ tmp_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
+ tmp_val >>= 32;
+ if (!(tmp_val & (0x1f << 25)))
+ read_val |= 0x0003bc00;
+ else
+ read_val |= 0x0001bc00;
break;
case 0xb4:
/* Table offset=0, BIR=0 */
--
2.9.3
\
 
 \ /
  Last update: 2017-01-11 20:22    [W:0.033 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site