lkml.org 
[lkml]   [2017]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v11 00/12] MT2701 DRM support
    Date
    This is MT2701 DRM support PATCH v10, based on 4.10-rc1.
    We add DSI interrupt control, transfer function for MIPI DSI panel support.
    Most codes are the same, except some register changed.

    For example:
    - DISP_OVL address offset changed, color format definition changed.
    - DISP_RDMA fifo size changed.
    - DISP_COLOR offset changed.
    - MIPI_TX setting changed.

    We add a new component DDP_COMPONENT_BLS, and the connections are updated.
    OVL -> RDMA -> COLOR -> BLS -> DSI
    RDMA -> DPI
    And we have shadow register support in MT2701.

    Changes since v10:
    - Add binding descriptions for newly added bindings
    - Remove color data pointer from generic mtk_ddp_comp
    - Remove "drm/mediatek: add mipi_tx data rate check" from the patch series
    - Remove "drm/mediatek: add dsi ulp mode control" from the patch series
    - Update descriptions for "drm/mediatek: add non-continuous clock mode and EOT packet control"
    - Fix DSI disable flow

    Changes since v9:
    - Split DSI patches into smaller parts
    - Use a real linux errno for return value
    - Add error handling in mtk_output_dsi_enable()
    - Remove unused changes and redundant delays
    - Add helpers and macros for configuration
    - Combine "drm/mediatek: rename macros, add chip prefix" and "drm/mediatek: add *driver_data for different hardware setting"

    Changes since v8:
    - enable 3 DSI interrupts only
    - move mtk_dsi_wait_for_irq_done() to the patch of irq control
    - use the name BLS in DRM driver part
    - move BLS declaration to a separate patch
    - update mtk_dsi_switch_to_cmd_mode()
    - update mtk_output_dsi_enable() and mtk_output_dsi_disable()

    Changes since v7:
    - Remove redundant codes
    - Move the definition of DDP_COMPONENT_BLS to patch of "drm/mediatek: update display module connections"
    - Move _dsi_irq_wait_queue into platform driver data
    - Move mtk_dsi_irq_data_clear() to patch of "drm/mediatek: add dsi interrupt control"
    - Add more descriptions in the commit messages

    Changes since v6:
    - Change data type of irq_data to u32
    - Rewrite mtk_dsi_host_transfer() for simplify
    - Move some MIPI_TX config to patch of "drm/mediatek: add *driver_data for different hardware settings".
    - Remove device tree from this patch series

    Changes since v5:
    - Remove DPI device tree and compatible string
    - Use one wait queue to handle interrupt status
    - Update the interrupt check flow and DSI_INT_ALL_BITS
    - Use same function for host read/write command
    - various fixes

    Changes since v4:
    - Add messages when timeout in mtk_disp_mutex_acquire()
    - Add descriptions for DISP_REG_MUTEX registers
    - Move connection settings for display modules to a separate patch
    - Remove 'mt2701-disp-wdma' because it is unused
    - Move cleaning up and renaming to a separate patch
    - Use wait_event_interruptible_timeout() to replace polling
    - Remove irq_num from mtk_dsi structure
    - Remove redundant and debug codes

    Changes since v3:
    - Add DSI support for MIPI DSI panels
    - Update BLS binding to PWM nodes
    - Remove ufoe device nodes
    - Remove redundant parentheses
    - Remove global variable initialization

    Changes since v2:
    - Rename mtk_ddp_mux_sel to mtk_ddp_sout_sel
    - Update mt2701_mtk_ddp_ext components
    - Changed to prefix naming
    - Reorder the patch series
    - Use of_device_get_match_data() to get driver private data
    - Use iopoll macros to implement mtk_disp_mutex_acquire()
    - Removed empty device tree nodes

    Changes since v1:
    - Removed BLS bindings and codes, which belong to pwm driver
    - Moved mtk_disp_mutex_acquire() just before mtk_crtc_ddp_config()
    - Split patch into smaller parts
    - Added const keyword to constant structure
    - Removed codes for special memory align

    Thanks,
    yt.shen

    YT Shen (10):
    dt-bindings: display: mediatek: update supported chips
    drm/mediatek: add helpers for coverting from the generic components
    drm/mediatek: add *driver_data for different hardware settings
    drm/mediatek: add shadow register support
    drm/mediatek: add BLS component
    drm/mediatek: update display module connections
    drm/mediatek: cleaning up and refine
    drm/mediatek: add non-continuous clock mode and EOT packet control
    drm/mediatek: update DSI sub driver flow for sending commands to panel
    drm/mediatek: add support for Mediatek SoC MT2701

    shaoming chen (2):
    drm/mediatek: add dsi interrupt control
    drm/mediatek: add dsi transfer function

    .../bindings/display/mediatek/mediatek,disp.txt | 2 +
    .../bindings/display/mediatek/mediatek,dsi.txt | 2 +
    drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 64 +++-
    drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 39 +-
    drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 75 ++--
    drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 138 +++++--
    drivers/gpu/drm/mediatek/mtk_drm_ddp.h | 2 +
    drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 69 +++-
    drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 2 +
    drivers/gpu/drm/mediatek/mtk_drm_drv.c | 54 ++-
    drivers/gpu/drm/mediatek/mtk_drm_drv.h | 9 +
    drivers/gpu/drm/mediatek/mtk_dsi.c | 414 ++++++++++++++++++---
    drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 38 +-
    13 files changed, 750 insertions(+), 158 deletions(-)

    --
    1.9.1

    \
     
     \ /
      Last update: 2017-01-11 07:52    [W:0.026 / U:35.160 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site