lkml.org 
[lkml]   [2016]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/5] ARM: dts: at91: sama5d4: use proper sckc compatible
Date
Now that there is support for the sama5d4 slow clock controller, use its
driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/sama5d4.dtsi | 27 ++++-----------------------
1 file changed, 4 insertions(+), 23 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 65e725fb5679..fe094263595c 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1314,30 +1314,11 @@
status = "disabled";
};

- sckc@fc068650 {
- compatible = "atmel,at91sam9x5-sckc";
+ clk32k: sckc@fc068650 {
+ compatible = "atmel,sama5d4-sckc";
reg = <0xfc068650 0x4>;
-
- slow_rc_osc: slow_rc_osc {
- compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-accuracy = <250000000>;
- atmel,startup-time-usec = <75>;
- };
-
- slow_osc: slow_osc {
- compatible = "atmel,at91sam9x5-clk-slow-osc";
- #clock-cells = <0>;
- clocks = <&slow_xtal>;
- atmel,startup-time-usec = <1200000>;
- };
-
- clk32k: slowck {
- compatible = "atmel,at91sam9x5-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc &slow_osc>;
- };
+ #clock-cells = <0>;
+ clocks = <&slow_xtal>;
};

rtc@fc0686b0 {
--
2.9.3
\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.110 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site