lkml.org 
[lkml]   [2016]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/2] drm/bridge: analogix_dp: detect Sink PSR state after configuring the PSR
On Wed, Sep 7, 2016 at 11:48 PM, Yakir Yang <ykk@rock-chips.com> wrote:
> Make sure the request PSR state could effect in analogix_dp_send_psr_spd()
> function, or printing the error Sink PSR state if we failed to effect
> the request PSR setting.
>


Let's change to:

Make sure the request PSR state takes effect in analogix_dp_send_psr_spd()
function, or print the sink PSR error state if we failed to apply the
requested PSR
setting.

> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> ---
> Changes in v2:
> - A bunch of good fixes from Sean
>
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 6 ++----
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 4 ++--
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 25 ++++++++++++++++++++--
> 3 files changed, 27 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 5fe3982..c0ce16a 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -116,8 +116,7 @@ int analogix_dp_enable_psr(struct device *dev)
> psr_vsc.DB0 = 0;
> psr_vsc.DB1 = EDP_VSC_PSR_STATE_ACTIVE | EDP_VSC_PSR_CRC_VALUES_VALID;
>
> - analogix_dp_send_psr_spd(dp, &psr_vsc);
> - return 0;
> + return analogix_dp_send_psr_spd(dp, &psr_vsc);
> }
> EXPORT_SYMBOL_GPL(analogix_dp_enable_psr);
>
> @@ -139,8 +138,7 @@ int analogix_dp_disable_psr(struct device *dev)
> psr_vsc.DB0 = 0;
> psr_vsc.DB1 = 0;
>
> - analogix_dp_send_psr_spd(dp, &psr_vsc);
> - return 0;
> + return analogix_dp_send_psr_spd(dp, &psr_vsc);
> }
> EXPORT_SYMBOL_GPL(analogix_dp_disable_psr);
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> index a15f076..6c07a50 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> @@ -247,8 +247,8 @@ void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp);
> void analogix_dp_enable_scrambling(struct analogix_dp_device *dp);
> void analogix_dp_disable_scrambling(struct analogix_dp_device *dp);
> void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp);
> -void analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
> - struct edp_vsc_psr *vsc);
> +int analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
> + struct edp_vsc_psr *vsc);
> ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
> struct drm_dp_aux_msg *msg);
> #endif /* _ANALOGIX_DP_CORE_H */
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index a4d17b8..09d703b 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -1004,10 +1004,12 @@ void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp)
> writel(PSR_VID_CRC_ENABLE, dp->reg_base + ANALOGIX_DP_CRC_CON);
> }
>
> -void analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
> - struct edp_vsc_psr *vsc)
> +int analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
> + struct edp_vsc_psr *vsc)
> {
> + unsigned long timeout;
> unsigned int val;
> + u8 sink;
>
> /* don't send info frame */
> val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> @@ -1048,6 +1050,25 @@ void analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
> val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> val |= IF_EN;
> writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> +
> + timeout = jiffies + msecs_to_jiffies(DP_TIMEOUT_LOOP_COUNT);

Mismatched units here. DP_TIMEOUT_LOOP_COUNT is defined as number of
retries, whereas you're using it as number of ms. Fortunately, the
retry number is so high that this works out :)

In a separate patch preceding this one, can you change
DP_TIMEOUT_LOOP_COUNT to DP_TIMEOUT_LOOP_MS and alter the other
timeout loops to use time_before() like this one instead of blindly
looping 100 times? After that, you can use DP_TIMEOUT_LOOP_MS here.

> + while (time_before(jiffies, timeout)) {
> + val = drm_dp_dpcd_readb(&dp->aux, DP_PSR_STATUS, &sink);
> + if (val != 1) {
> + dev_err(dp->dev, "PSR_STATUS read failed ret=%d", val);
> + return val;

Ok, since this is my snippet this comment is my fault, and I apologize
for that :). However, this could return 0. If drm_dp_dpcd_readb
returns 0, you probably want to retry (same as -EBUSY).

> + }
> +
> + if (vsc->DB1 && sink == DP_PSR_SINK_ACTIVE_RFB ||
> + !vsc->DB1 && sink == DP_PSR_SINK_INACTIVE)
> + break;
> +
> + usleep_range(1000, 1500);
> + }
> +
> + dev_warn(dp->dev, "Failed to effect PSR: %x", sink);

Nit: I think you want to say "PSR failed to take effect" or "Failed to
apply PSR"

Sean

> +
> + return -ETIMEDOUT;
> }
>
> ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
> --
> 1.9.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.087 / U:0.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site