lkml.org 
[lkml]   [2016]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] hwmon: xgene: Fix crash when alarm occurs before driver probe
On Wed, Sep 07, 2016 at 11:55:06AM -0700, Hoan Tran wrote:
> Hi Guenter,
>
> On Tue, Sep 6, 2016 at 11:39 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> > On 09/06/2016 11:07 PM, Hoan Tran wrote:
> >>
> >> Hi Guenter,
> >>
> >> On Tue, Sep 6, 2016 at 10:50 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> >>>
> >>> On 09/06/2016 10:21 PM, Hoan Tran wrote:
> >>>>
> >>>>
> >>>> Hi Guenter,
> >>>>
> >>>> Thank for your quick review !
> >>>>
> >>>> On Tue, Sep 6, 2016 at 9:35 PM, Guenter Roeck <linux@roeck-us.net>
> >>>> wrote:
> >>>>>
> >>>>>
> >>>>> On 09/06/2016 08:46 PM, Hoan Tran wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> The system crashes during probing xgene-hwmon driver when temperature
> >>>>>> alarm interrupt occurs before.
> >>>>>> It's because
> >>>>>> - xgene_hwmon_probe() requests PCC mailbox channel which also enables
> >>>>>> the mailbox interrupt.
> >>>>>> - As temperature alarm interrupt is pending, ISR runs and crashes
> >>>>>> when
> >>>>>> accesses
> >>>>>> into invalid resource as unmapped PCC shared memory.
> >>>>>>
> >>>>>> This patch fixes this issue by saving this alarm message and
> >>>>>> scheduling
> >>>>>> a
> >>>>>> bottom handler after xgene_hwmon_probe() finish.
> >>>>>>
> >>>>>
> >>>>> I am not completely happy with this fix. Main problem I have is that
> >>>>> the
> >>>>> processing associated with resp_pending doesn't happen until init_flag
> >>>>> is
> >>>>> set.
> >>>>> Since the hwmon functions can be called right after
> >>>>> hwmon_device_register_with_groups(),
> >>>>> there is now a new race condition between that call and setting
> >>>>> init_flag.
> >>>>
> >>>>
> >>>>
> >>>> I think it's still good if hwmon functions are called right after
> >>>> hwmon_device_register_with_groups().
> >>>> The response message will be queued into FIFO and be processed later.
> >>>>
> >>> Yes, but the call to complete() won't happen in this case, or am I
> >>> missing
> >>> something ?
> >>
> >>
> >> Yes, I think xgene_hwmon_rd() and xgene_hwmon_pcc_rd() functions have
> >> to check "init_flag == true" before issue the read command.
> >>
> >
> > This is getting more and more messy :-(
> >
> >> Thanks
> >> Hoan
> >>
> >>>
> >>> Guenter
> >>>
> >>>
> >>>>>
> >>>>> I am also a bit concerned with init_flag and rx_pending not being
> >>>>> atomic
> >>>>> and
> >>>>> protected.
> >>>>> What happens if a second interrupt occurs right after init_flag is set
> >>>>> but
> >>>>> before
> >>>>> (or while) rx_pending is evaluated ?
> >>>>
> >>>>
> >>>>
> >>>> Yah, that's a good catch. I can re-use the "kfifo_lock" spinlock for
> >>>> this atomic protection.
> >>>>
> >>>>>
> >>>>> On top of that, init_flag and thus the added complexity is (unless I am
> >>>>> missing
> >>>>> something) only needed if acpi is enabled. Penaltizing non-acpi code
> >>>>> doesn't
> >>>>> seem
> >>>>> to be optimal.
> >>>>
> >>>>
> >>>>
> >>>> I think, with DT, we still need this flag. In a case of temperature
> >>>> alarm, the driver needs to set "temp1_critical_alarm" sysfs.
> >>>> This "temp1_critical_alarm" should be created before "init_flag" = true.
> >>>>
> >
> > I don't know. After all, any such alarm would be lost if it occurred
> > before the driver was loaded, no ? Those mailboxes should really have
> > a means to be informed that the initiator is ready to handle
> > interrupts/callbacks.
>
> We don't want to miss an alarm message. User should be warned.
>
> As
> ctx->hwmon_dev = hwmon_device_register_with_groups(ctx->dev,
>
> "apm_xgene",
> ctx,
> xgene_hwmon_groups);
> How about, callback functions check the ctx->hwmon_dev validation. If
> not, they just save msg into FIFO.
> Beside of that, as hwmon functions can be called before ctx->hwmon_dev
> is assigned. Callback functions check if there is a mailbox response
> pending before saving msg into FIFO as below
>
> static int xgene_hwmon_rx_ready(struct xgene_hwmon_dev *ctx, void *msg)
> {
> if (IS_ERR(ctx->hwmon_dev) && !ctx->resp_pending) {

Probably IS_ERR_OR_ZERO() ?

Guenter

> /* Enqueue to the FIFO */
> kfifo_in_spinlocked(&ctx->async_msg_fifo, msg,
> sizeof(struct slimpro_resp_msg),
> &ctx->kfifo_lock);
>
> return -EBUSY;

Need to find something else. EBUSY isn't correct.

> }
>
> return 0;
> }
>
>
> At the end of probe function, driver always schedules a bottom handler
> to handle FIFO msg.
>
> Then we can remove the init_flag and rx_pending.
>

At least better than before, though I think it is still racy.
It might be worthwhile checking by adding a large msleep()
after hwmon registration and before ctx->hwmon_dev is written,
and have a user space program access sysfs attributes immediately
after they have been created.

Thanks,
Guenter

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.214 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site