lkml.org 
[lkml]   [2016]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH v2 01/20] x86: Documentation for AMD Secure Memory Encryption (SME)
From
Date
On 09/02/2016 03:50 AM, Borislav Petkov wrote:
> On Mon, Aug 22, 2016 at 05:35:39PM -0500, Tom Lendacky wrote:
>> This patch adds a Documenation entry to decribe the AMD Secure Memory
>> Encryption (SME) feature.
>>
>> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
>> ---
>> Documentation/x86/amd-memory-encryption.txt | 35 +++++++++++++++++++++++++++
>> 1 file changed, 35 insertions(+)
>> create mode 100644 Documentation/x86/amd-memory-encryption.txt
>>
>> diff --git a/Documentation/x86/amd-memory-encryption.txt b/Documentation/x86/amd-memory-encryption.txt
>> new file mode 100644
>> index 0000000..f19c555
>> --- /dev/null
>> +++ b/Documentation/x86/amd-memory-encryption.txt
>> @@ -0,0 +1,35 @@
>> +Secure Memory Encryption (SME) is a feature found on AMD processors.
>> +
>> +SME provides the ability to mark individual pages of memory as encrypted using
>> +the standard x86 page tables. A page that is marked encrpyted will be
>
> s/encrpyted/encrypted/

Ugh.. I thought I caught all of these. Obviously not. I'll go through
all the patches on this.

>
>> +automatically decrypted when read from DRAM and encrypted when written to
>> +DRAM. SME can therefore be used to protect the contents of DRAM from physical
>> +attacks on the system.
>> +
>> +Support for SME can be determined through the CPUID instruction. The CPUID
>> +function 0x8000001f reports information related to SME:
>> +
>> + 0x8000001f[eax]:
>> + Bit[0] indicates support for SME
>> + 0x8000001f[ebx]:
>> + Bit[5:0] pagetable bit number used to enable memory encryption
>> + Bit[11:6] reduction in physical address space, in bits, when
>> + memory encryption is enabled (this only affects system
>> + physical addresses, not guest physical addresses)
>> +
>> +If support for SME is present, MSR 0xc00100010 (SYS_CFG) can be used to
>> +determine if SME is enabled and/or to enable memory encryption:
>> +
>> + 0xc0010010:
>> + Bit[23] 0 = memory encryption features are disabled
>> + 1 = memory encryption features are enabled
>> +
>> +Linux relies on BIOS to set this bit if BIOS has determined that the reduction
>> +in the physical address space as a result of enabling memory encryption (see
>> +CPUID information above) will not conflict with the address space resource
>> +requirements for the system. If this bit is not set upon Linux startup then
>> +Linux itself will not set it and memory encryption will not be possible.
>> +
>> +SME support is configurable in the kernel through the AMD_MEM_ENCRYPT config
>> +option.
>
> " ... is configurable through CONFIG_AMD_MEM_ENCRYPT."

Ok.

>
>> Additionally, the mem_encrypt=on command line parameter is required
>> +to activate memory encryption.
>
> I think you want to rewrite the logic here to say that people should use
> the BIOS option and if none is present for whatever reason, resort to
> the alternative "mem_encrypt=on" kernel command line option, no?

Yes, I'll work on rewording this section.

Thanks,
Tom
>

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.110 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site