lkml.org 
[lkml]   [2016]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 08/10] PM core: Fix restoring devices with links during system PM transition
Date
On Friday, June 17, 2016 08:26:58 AM Marek Szyprowski wrote:
> When devices are being runtime resumed during the system PM transition to
> suspend state, the link suppliers might be already resumed and
> have runtime pm disabled. This is normal case. This patch adds special
> support for such case. Simple call to pm_runtime_get_sync returns error
> when device has runtime PM disabled, what results in incorrect runtime PM
> state during system wide PM transition.

The problem is real, but the proposed solution is questionable.

>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
> drivers/base/power/runtime.c | 22 +++++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
> index 0ea00d442e0f..d00b079fad88 100644
> --- a/drivers/base/power/runtime.c
> +++ b/drivers/base/power/runtime.c
> @@ -261,6 +261,26 @@ static int rpm_check_suspend_allowed(struct device *dev)
> }
>
> /**
> + * __pm_runtime_force_resume - force resume of the device
> + * @dev: Device to resume
> + *
> + * This function works like __pm_runtime_resume(dev, RPM_GET_PUT), but
> + * also handles devices with runtime PM disabled. This allows to properly
> + * control all devices during preparation for system PM transition.
> + */
> +static int __pm_runtime_force_resume(struct device *dev)
> +{
> + if (!dev->power.disable_depth)
> + return pm_runtime_get_sync(dev);
> +
> + if (dev->power.runtime_status != RPM_ACTIVE ||
> + atomic_inc_not_zero(&dev->power.usage_count) == 0)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +/**
> * __rpm_callback - Run a given runtime PM callback for a given device.
> * @cb: Runtime PM callback to run.
> * @dev: Device to run the callback for.
> @@ -291,7 +311,7 @@ static int __rpm_callback(int (*cb)(struct device *), struct device *dev)
> if ((link->flags & DEVICE_LINK_PM_RUNTIME)
> && link->status != DEVICE_LINK_SUPPLIER_UNBIND
> && !link->rpm_active) {
> - retval = pm_runtime_get_sync(link->supplier);
> + retval = __pm_runtime_force_resume(link->supplier);
> if (retval < 0) {
> pm_runtime_put_noidle(link->supplier);
> goto fail;

The reason why power.disable_depth is different from 0 may not be system suspend,
in which case it should fail even if the status happens to be RPM_ACTIVE.

Thanks,
Rafael

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.217 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site