lkml.org 
[lkml]   [2016]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH kernel] PCI: Enable access to custom VPD for Chelsio devices (cxgb3)
Hi Alexey,

On Thu, Aug 11, 2016 at 08:03:29PM +1000, Alexey Kardashevskiy wrote:
> There is at least one Chelsio 10Gb card which uses VPD area to store
> some custom blocks (example below). However pci_vpd_size() returns
> the length of the first block only assuming that there can be only
> one VPD "End Tag" and VFIO blocks access beyond that offset
> (since 4e1a63555) which leads to the situation when the guest "cxgb3"
> driver fails to probe the device. The host system does not have this
> problem as the drives accesses the config space directly without
> pci_read_vpd()/...
>
> This adds a quirk to override the VPD size to a bigger value.
>
> This is the controller:
> Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030]
>
> This is its VPD:
> #0000 Large item 42 bytes; name 0x2 Identifier String
> b'10 Gigabit Ethernet-SR PCI Express Adapter'
> #002d Large item 74 bytes; name 0x10
> #00 [EC] len=7: b'D76809 '
> #0a [FN] len=7: b'46K7897'
> #14 [PN] len=7: b'46K7897'
> #1e [MN] len=4: b'1037'
> #25 [FC] len=4: b'5769'
> #2c [SN] len=12: b'YL102035603V'
> #3b [NA] len=12: b'00145E992ED1'
> #007a Small item 1 bytes; name 0xf End Tag
> ---
> #0c00 Large item 16 bytes; name 0x2 Identifier String
> b'S310E-SR-X '
> #0c13 Large item 234 bytes; name 0x10
> #00 [PN] len=16: b'TBD '
> #13 [EC] len=16: b'110107730D2 '
> #26 [SN] len=16: b'97YL102035603V '
> #39 [NA] len=12: b'00145E992ED1'
> #48 [V0] len=6: b'175000'
> #51 [V1] len=6: b'266666'
> #5a [V2] len=6: b'266666'
> #63 [V3] len=6: b'2000 '
> #6c [V4] len=2: b'1 '
> #71 [V5] len=6: b'c2 '
> #7a [V6] len=6: b'0 '
> #83 [V7] len=2: b'1 '
> #88 [V8] len=2: b'0 '
> #8d [V9] len=2: b'0 '
> #92 [VA] len=2: b'0 '
> #97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'...
> #0d00 Large item 252 bytes; name 0x11
> #00 [VC] len=16: b'122310_1222 dp '
> #13 [VD] len=16: b'610-0001-00 H1\x00\x00'
> #26 [VE] len=16: b'122310_1353 fp '
> #39 [VF] len=16: b'610-0001-00 H1\x00\x00'
> #4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'...
> #0dff Small item 0 bytes; name 0xf End Tag
>
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
> drivers/pci/quirks.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index ee72ebe1..94d3fb5 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -3241,6 +3241,18 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE,
> quirk_thunderbolt_hotplug_msi);
>
> +static void quirk_chelsio_extend_vpd(struct pci_dev *dev)
> +{
> + if (!dev->vpd || !dev->vpd->ops || !dev->vpd->ops->set_size)
> + return;
> +
> + dev->vpd->ops->set_size(dev, max_t(unsigned int, dev->vpd->len, 0xe00));
> +}
> +
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO,
> + PCI_ANY_ID,
> + quirk_chelsio_extend_vpd);

Do you really want this for *all* Chelsio devices? If you only need
it for certain devices, the quirk could probably go in the driver.

Can you use pci_set_vpd_size() instead? There's already a use of that
in cxgb4.

> +
> #ifdef CONFIG_ACPI
> /*
> * Apple: Shutdown Cactus Ridge Thunderbolt controller.
> --
> 2.5.0.rc3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:1.917 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site