lkml.org 
[lkml]   [2016]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.
Date
Fixes setting low-resolution video modes on HDMI.  Now the PLLH_PIX
divider adjusts itself until the PLLH is within bounds.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
drivers/clk/bcm/clk-bcm2835.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 7a7970865c2d..69a1849d140c 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -499,8 +499,12 @@ static long bcm2835_pll_rate_from_divisors(unsigned long parent_rate,
static long bcm2835_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
+ struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+ const struct bcm2835_pll_data *data = pll->data;
u32 ndiv, fdiv;

+ rate = clamp(rate, data->min_rate, data->max_rate);
+
bcm2835_pll_choose_ndiv_and_fdiv(rate, *parent_rate, &ndiv, &fdiv);

return bcm2835_pll_rate_from_divisors(*parent_rate, ndiv, fdiv, 1);
@@ -605,13 +609,6 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw,
u32 ana[4];
int i;

- if (rate < data->min_rate || rate > data->max_rate) {
- dev_err(cprman->dev, "%s: rate out of spec: %lu vs (%lu, %lu)\n",
- clk_hw_get_name(hw), rate,
- data->min_rate, data->max_rate);
- return -EINVAL;
- }
-
if (rate > data->max_fb_rate) {
use_fb_prediv = true;
rate /= 2;
--
2.9.3
\
 
 \ /
  Last update: 2016-09-30 19:08    [W:0.029 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site