lkml.org 
[lkml]   [2016]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] g_NCR5380: Remove deprecated __setup

Acked-by: Finn Thain <fthain@telegraphics.com.au>

On Tue, 27 Sep 2016, Ondrej Zary wrote:

> Remove deprecated __setup for parsing command line parameters.
> g_NCR5380.* parameters could be used instead.
>
> This might break existing setups with g_NCR5380 built-in (if there are
> any). But it has to go in order to remove the overrides[] array.

Instead of "in order to" I think you meant "along with" (otherwise it
seems to be a non-sequitur). No matter.

--

>
> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
> ---
> Documentation/scsi/g_NCR5380.txt | 10 ---
> drivers/scsi/g_NCR5380.c | 135 --------------------------------------
> 2 files changed, 145 deletions(-)
>
> diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt
> index fd88015..843cbae 100644
> --- a/Documentation/scsi/g_NCR5380.txt
> +++ b/Documentation/scsi/g_NCR5380.txt
> @@ -21,16 +21,6 @@ NCR53c400 card, the Trantor T130B in its default configuration:
> The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
> supported by the driver.
>
> -If the default configuration does not work for you, you can use the kernel
> -command lines (eg using the lilo append command):
> - ncr5380=addr,irq
> - ncr53c400=addr,irq
> - ncr53c400a=addr,irq
> - dtc3181e=addr,irq
> -
> -The driver does not probe for any addresses or ports other than those in
> -the OVERRIDE or given to the kernel as above.
> -
> This driver provides some information on what it has detected in
> /proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
> time. More info to come in the future.
> diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> index 516bd6c..7e50b44e 100644
> --- a/drivers/scsi/g_NCR5380.c
> +++ b/drivers/scsi/g_NCR5380.c
> @@ -56,136 +56,6 @@ static struct override {
>
> #define NO_OVERRIDES ARRAY_SIZE(overrides)
>
> -#ifndef MODULE
> -
> -/**
> - * internal_setup - handle lilo command string override
> - * @board: BOARD_* identifier for the board
> - * @str: unused
> - * @ints: numeric parameters
> - *
> - * Do LILO command line initialization of the overrides array. Display
> - * errors when needed
> - *
> - * Locks: none
> - */
> -
> -static void __init internal_setup(int board, char *str, int *ints)
> -{
> - static int commandline_current;
> - switch (board) {
> - case BOARD_NCR5380:
> - if (ints[0] != 2 && ints[0] != 3) {
> - printk(KERN_ERR "generic_NCR5380_setup : usage ncr5380=" STRVAL(NCR5380_map_name) ",irq,dma\n");
> - return;
> - }
> - break;
> - case BOARD_NCR53C400:
> - if (ints[0] != 2) {
> - printk(KERN_ERR "generic_NCR53C400_setup : usage ncr53c400=" STRVAL(NCR5380_map_name) ",irq\n");
> - return;
> - }
> - break;
> - case BOARD_NCR53C400A:
> - if (ints[0] != 2) {
> - printk(KERN_ERR "generic_NCR53C400A_setup : usage ncr53c400a=" STRVAL(NCR5380_map_name) ",irq\n");
> - return;
> - }
> - break;
> - case BOARD_DTC3181E:
> - if (ints[0] != 2) {
> - printk("generic_DTC3181E_setup : usage dtc3181e=" STRVAL(NCR5380_map_name) ",irq\n");
> - return;
> - }
> - break;
> - }
> -
> - if (commandline_current < NO_OVERRIDES) {
> - overrides[commandline_current].NCR5380_map_name = (NCR5380_map_type) ints[1];
> - overrides[commandline_current].irq = ints[2];
> - if (ints[0] == 3)
> - overrides[commandline_current].dma = ints[3];
> - else
> - overrides[commandline_current].dma = DMA_NONE;
> - overrides[commandline_current].board = board;
> - ++commandline_current;
> - }
> -}
> -
> -
> -/**
> - * do_NCR53C80_setup - set up entry point
> - * @str: unused
> - *
> - * Setup function invoked at boot to parse the ncr5380= command
> - * line.
> - */
> -
> -static int __init do_NCR5380_setup(char *str)
> -{
> - int ints[10];
> -
> - get_options(str, ARRAY_SIZE(ints), ints);
> - internal_setup(BOARD_NCR5380, str, ints);
> - return 1;
> -}
> -
> -/**
> - * do_NCR53C400_setup - set up entry point
> - * @str: unused
> - * @ints: integer parameters from kernel setup code
> - *
> - * Setup function invoked at boot to parse the ncr53c400= command
> - * line.
> - */
> -
> -static int __init do_NCR53C400_setup(char *str)
> -{
> - int ints[10];
> -
> - get_options(str, ARRAY_SIZE(ints), ints);
> - internal_setup(BOARD_NCR53C400, str, ints);
> - return 1;
> -}
> -
> -/**
> - * do_NCR53C400A_setup - set up entry point
> - * @str: unused
> - * @ints: integer parameters from kernel setup code
> - *
> - * Setup function invoked at boot to parse the ncr53c400a= command
> - * line.
> - */
> -
> -static int __init do_NCR53C400A_setup(char *str)
> -{
> - int ints[10];
> -
> - get_options(str, ARRAY_SIZE(ints), ints);
> - internal_setup(BOARD_NCR53C400A, str, ints);
> - return 1;
> -}
> -
> -/**
> - * do_DTC3181E_setup - set up entry point
> - * @str: unused
> - * @ints: integer parameters from kernel setup code
> - *
> - * Setup function invoked at boot to parse the dtc3181e= command
> - * line.
> - */
> -
> -static int __init do_DTC3181E_setup(char *str)
> -{
> - int ints[10];
> -
> - get_options(str, ARRAY_SIZE(ints), ints);
> - internal_setup(BOARD_DTC3181E, str, ints);
> - return 1;
> -}
> -
> -#endif
> -
> #ifndef SCSI_G_NCR5380_MEM
> /*
> * Configure I/O address of 53C400A or DTC436 by writing magic numbers
> @@ -741,8 +611,3 @@ static struct isapnp_device_id id_table[] = {
>
> MODULE_DEVICE_TABLE(isapnp, id_table);
> #endif
> -
> -__setup("ncr5380=", do_NCR5380_setup);
> -__setup("ncr53c400=", do_NCR53C400_setup);
> -__setup("ncr53c400a=", do_NCR53C400A_setup);
> -__setup("dtc3181e=", do_DTC3181E_setup);
>

\
 
 \ /
  Last update: 2016-09-29 00:56    [W:0.061 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site