lkml.org 
[lkml]   [2016]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCHv3 0/3] Fix hardware handshake on SAM9x5 platforms
Date
Since commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when
hardware handshake is enabled"), hardware handshake is not working
anymore on SAM9x5/SAMA5D3/SAM9 platforms.

The first two patches fix the hardware handshake when CTS/RTS pins are
handled by GPIOs.

The last patch fixes hardware handshake when CTS/RTS pins are not GPIOs.

Changes since v2:
- remove IS_ERR_OR_NULL() test in patch 1/3 as Uwe suggested.
- fix typos in patch 2/3
- rebase on next-20160927
- simplify the logic in patch 3/3.

Changes since v1:
- Correct patch 1 with the error found by kbuild.
- Add Alexandre's Acked-by on patch 2
- Rewrite patch 3 logic in the light of the on-going discussion
with Cyrille and Alexandre.

NB: patch 2 NEEDS patch 1 to compile.

Richard Genoud (3):
serial: mctrl_gpio: implement mctrl_gpio_use_rtscts
tty/serial: at91: fix hardware handshake with GPIOs
tty/serial: at91: fix hardware handshake on SAM9x5 (without GPIOs)

drivers/tty/serial/atmel_serial.c | 26 +++++++++++++++++---------
drivers/tty/serial/serial_mctrl_gpio.c | 8 ++++++++
drivers/tty/serial/serial_mctrl_gpio.h | 10 ++++++++++
3 files changed, 35 insertions(+), 9 deletions(-)

\
 
 \ /
  Last update: 2016-09-27 16:14    [W:0.074 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site