lkml.org 
[lkml]   [2016]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] tty/serial: atmel: fix fractional baud rate computation
On Wed, 21 Sep 2016 12:44:14 +0200
Nicolas Ferre <nicolas.ferre@atmel.com> wrote:

> From: Alexey Starikovskiy <aystarik@gmail.com>
>
> The problem with previous code was it rounded values in wrong
> place and produced wrong baud rate in some cases.
>
> Signed-off-by: Alexey Starikovskiy <aystarik@gmail.com>
> [nicolas.ferre@atmel.com: port to newer kernel and add commit log]
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
> drivers/tty/serial/atmel_serial.c | 10 ++++++----
> include/linux/atmel_serial.h | 1 +
> 2 files changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index 5f550d9feed9..fd8aa1f4ba78 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -2170,13 +2170,15 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
> * accurately. This feature is enabled only when using normal mode.
> * baudrate = selected clock / (8 * (2 - OVER) * (CD + FP / 8))
> * Currently, OVER is always set to 0 so we get
> - * baudrate = selected clock (16 * (CD + FP / 8))
> + * baudrate = selected clock / (16 * (CD + FP / 8))
> + * then
> + * 8 CD + FP = selected clock / (2 * baudrate)
> */
> if (atmel_port->has_frac_baudrate &&
> (mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_NORMAL) {
> - div = DIV_ROUND_CLOSEST(port->uartclk, baud);
> - cd = div / 16;
> - fp = DIV_ROUND_CLOSEST(div % 16, 2);
> + div = DIV_ROUND_CLOSEST(port->uartclk, baud * 2);
> + cd = div >> 3;
> + fp = div & ATMEL_US_FP_MASK;
> } else {
> cd = uart_get_divisor(port, baud);
> }
> diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h
> index f8e452aa48d7..bd2560502f3c 100644
> --- a/include/linux/atmel_serial.h
> +++ b/include/linux/atmel_serial.h
> @@ -119,6 +119,7 @@
> #define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
> #define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */
> #define ATMEL_US_FP_OFFSET 16 /* Fractional Part */
> +#define ATMEL_US_FP_MASK 0x7
>
> #define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register for USART */
> #define ATMEL_UA_RTOR 0x28 /* Receiver Time-out Register for UART */

\
 
 \ /
  Last update: 2016-09-25 14:15    [W:0.066 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site