lkml.org 
[lkml]   [2016]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen
From
Date
Hi Dimitry,

Sorry for the (long) delay, I did not have time to work on it. I'll
mainly work in my free time now.

On 20/07/2016 19:25, Dmitry Torokhov wrote:
> Hi Quentin,
>
> On Wed, Jul 20, 2016 at 10:29:10AM +0200, Quentin Schulz wrote:
>> This adds support for Allwinner SoCs' (A10, A13 and A31) resistive
>> touchscreen. This driver is probed by the MFD sunxi-gpadc-mfd.
>>
>> This driver uses ADC channels exposed through the IIO framework by
>> sunxi-gpadc-iio to get its data. When opening this input device, it will
>> start buffering in the ADC driver and enable a TP_UP_PENDING irq. The ADC
>> driver will fill in a buffer with all data and call the callback the input
>> device associated with this buffer. The input device will then read the
>> buffer two by two and send X and Y coordinates to the input framework based
>> on what it received from the ADC's buffer. When closing this input device,
>> the buffering is stopped.
>>
>> Note that locations in the first received buffer after an TP_UP_PENDING irq
>> occurred are unreliable, thus dropped.
>>
>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
>> ---
[...]
>> + info->buffer = iio_channel_get_all_cb(&pdev->dev,
>> + &sunxi_gpadc_ts_callback,
>> + (void *)info);
>
> Any chance we could introduce devm-variant here? If you do not want to
> wait for IIO to add it you can temporarily add call
> devm_add_action_or_reset() after getting channels and remove it when IIO
> API catches up.
>

Something like:

release_iio_channels(void* data)
{
struct sunxi_gpadc_ts *info = data;
iio_channel_release_all_cb(info->buffer);
}

[...]
info->buffer = iio_channel_get_all_cb(&pdev->dev,
&sunxi_gpadc_ts_callback,
(void *)info);
ret = devm_add_action_or_reset(&pdev->dev,
release_iio_channels,
(void *)info);
if (ret)
return ret;

?

May I know why you prefer that way instead of explicit removing in
remove function of the platform device? I understand for devm-variant
already in the framework but I am curious for this one.

[...]
>> +static int sunxi_gpadc_ts_remove(struct platform_device *pdev)
>> +{
>> + struct sunxi_gpadc_ts *info = platform_get_drvdata(pdev);
>> +
>> + iio_channel_stop_all_cb(info->buffer);
>> + iio_channel_release_all_cb(info->buffer);
>> +
>> + disable_irq(info->tp_up_irq);
>
> You are mixing devm and non-devm so your unwind order is completely out
> of wack. If input device is opened while you are unloading (or
> unbinding) the dirver, then you'll release channels, then input device's
> close() will be called, which will try to stop the IIO channels again
> and disable IRQ yet again.
>

Do you mean that I should be using exclusively devm or non-devm functions?
Do you mean input device's close will always be called when
unloading/unbinding the driver?

[...]
Thanks,
Quentin

--
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2016-09-24 20:26    [W:0.101 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site