lkml.org 
[lkml]   [2016]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/4] regulator: axp20x: add the AXP803
On Fri, Sep 23, 2016 at 09:00:42AM +0200, Jean-Francois Moine wrote:
> The X-Powers AXP803 PMIC is close to the AXP809 with more outputs.
> It is used in some Allwinner boards as the Sinovoip BananaPi M64
> and the Pine A64.
>
> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
> ---
> not tested
> ---
> Documentation/devicetree/bindings/mfd/axp20x.txt | 32 +++-
> drivers/mfd/axp20x.c | 13 ++
> drivers/regulator/Makefile | 3 +-
> drivers/regulator/axp803.c | 225 +++++++++++++++++++++++
> include/linux/mfd/axp20x.h | 1 +
> 5 files changed, 271 insertions(+), 3 deletions(-)
> create mode 100644 drivers/regulator/axp803.c
>
> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
> index 8f3ad9a..3332d02 100644
> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt
> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
> @@ -6,12 +6,13 @@ axp202 (X-Powers)
> axp209 (X-Powers)
> axp221 (X-Powers)
> axp223 (X-Powers)
> +axp803 (X-Powers)
> axp809 (X-Powers)
>
> Required properties:
> - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209",
> - "x-powers,axp221", "x-powers,axp223", "x-powers,axp806",
> - "x-powers,axp809"
> + "x-powers,axp221", "x-powers,axp223", "x-powers,axp803",
> + "x-powers,axp806", "x-powers,axp809"

If you respin this, please reformat this to one per line.

Acked-by: Rob Herring <robh@kernel.org>

> - reg: The I2C slave address or RSB hardware address for the AXP chip
> - interrupt-parent: The parent interrupt controller
> - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
> @@ -86,6 +87,33 @@ LDO_IO1 : LDO : ips-supply : GPIO 1
> RTC_LDO : LDO : ips-supply : always on
> DRIVEVBUS : Enable output : drivevbus-supply : external regulator
>
> +AXP803 regulators, type, and corresponding input supply names:
> +
> +Regulator Type Supply Name Notes
> +--------- ---- ----------- -----
> +DCDC1 : DC-DC buck : vin1-supply
> +DCDC2 : DC-DC buck : vin2-supply
> +DCDC3 : DC-DC buck : vin3-supply
> +DCDC4 : DC-DC buck : vin4-supply
> +DCDC5 : DC-DC buck : vin5-supply
> +DCDC6 : DC-DC buck : vin6-supply
> +ALDO1 : LDO : aldoin-supply : shared supply
> +ALDO2 : LDO : aldoin-supply : shared supply
> +ALDO3 : LDO : aldoin-supply : shared supply
> +DLDO1 : LDO : dldoin-supply : shared supply
> +DLDO2 : LDO : dldoin-supply : shared supply
> +DLDO3 : LDO : dldoin-supply : shared supply
> +DLDO4 : LDO : dldoin-supply : shared supply
> +ELDO1 : LDO : eldoin-supply : shared supply
> +ELDO2 : LDO : eldoin-supply : shared supply
> +ELDO3 : LDO : eldoin-supply : shared supply
> +FLDO1 : LDO : fldoin-supply : shared supply
> +FLDO2 : LDO : fldoin-supply : shared supply
> +RTC_LDO : LDO : ips-supply : always on
> +LDO_IO0 : LDO : ips-supply : GPIO 0
> +LDO_IO1 : LDO : ips-supply : GPIO 1
> +DC1SW : On/Off Switch : : DCDC1 secondary output
> +
> AXP806 regulators, type, and corresponding input supply names:
>
> Regulator Type Supply Name Notes

\
 
 \ /
  Last update: 2016-09-24 00:18    [W:0.071 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site