lkml.org 
[lkml]   [2016]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] rtc-cmos: Reject unsupported alarm values
2016-09-22 1:29 GMT+02:00 Alexandre Belloni
<alexandre.belloni@free-electrons.com>:
> On 02/09/2016 at 21:55:16 +0200, Gabriele Mazzotta wrote :
>> Some platforms allows to specify the month and day of the month in
>> which an alarm should go off, some others the day of the month and
>> some others just the time.
>>
>> Currently any given value is accepted by the driver and only the
>> supported fields are used to program the hardware. As consequence,
>> alarms are potentially programmed to go off in the wrong moment.
>>
>> Fix this by rejecting any value not supported by the hardware.
>>
>> Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
>> ---
>>
>> I revisited the naive implementation of v1. I tested the new
>> algorithm using some dates that and verified that it behaved as
>> expected, but I might have missed some corner cases.
>>
>> I made some assumptions that maybe should be dropped, at least
>> two of them. They are commented in the code, but I didn't mention
>> that they are assumptions:
>>
>> - If the day can't be specified, the alarm can only be set to go
>> off 24 hours minus 1 second in the future. I'm worried things
>> would go wrong if the current time is used to set an alarm that
>> should go off the next day.
>> - If the mday can be specified and the next month has more days
>> than the current month, the alarm can be set to go off in the
>> extra days of the next month.
>
> Hum, you are actually not allowing them in the code below (which I think
> is the right thing to do).

I do, unfortunately. If it's "2015/02/28 01:23:45", then
"2015/03/31 01:23:44" is considered valid and yes, this is wrong.

>> - If the month can be specified, it's the 28th of February and the
>> next year is a leap year, the alarm can be set for the 29th of
>> February of the next year.
>
> Is that really true? I would expect the opposite. If it is currently
> 28/02, the max date you can actually go to is 27/02. If you allow 29/02,
> at some time the RTC will have 28/02 and the alarm will fire.

What I thought here is that since we write MM/DD-hh:mm:ss, if it's
02/28-01:34:56 (A) and I set the alarm for 02/29-01:34:55 (B),
that alarm can only go off next year. What I realize now is
that allowing (B), for example, makes 02/28-01:34:57 ambiguous
as it appears twice between (A) and (B). So yes, this is wrong.

>>
>> Basically I'm assuming that the hardware decides when an alarm should
>> go off comparing the current date with the one programmed. If they
>> match, the alarm goes off. This seemed reasonable to me, but it's
>> not easy to verify.
>>
>> drivers/rtc/rtc-cmos.c | 104 +++++++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 104 insertions(+)
>>
>> diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
>> index 4cdb335..37cb7c1 100644
>> --- a/drivers/rtc/rtc-cmos.c
>> +++ b/drivers/rtc/rtc-cmos.c
>> @@ -328,14 +328,118 @@ static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
>> cmos_checkintr(cmos, rtc_control);
>> }
>>
>> +static int cmos_validate_alarm(struct device *dev, struct rtc_wkalrm *t)
>> +{
>> + struct cmos_rtc *cmos = dev_get_drvdata(dev);
>> + struct rtc_time now;
>> +
>> + cmos_read_time(dev, &now);
>> +
>> + if (!cmos->day_alrm) {
>> + time64_t t_max_date;
>> + time64_t t_alrm;
>> +
>> + t_alrm = rtc_tm_to_time64(&t->time);
>> + t_max_date = rtc_tm_to_time64(&now);
>> + /*
>> + * Subtract 1 second to ensure that the alarm time is
>> + * different from the current time.
>> + */
>> + t_max_date += 24 * 60 * 60 - 1;
>> + if (t_alrm > t_max_date) {
>> + dev_err(dev,
>> + "Alarms can be up to one day in the future\n");
>> + return -EINVAL;
>> + }
>> + } else if (!cmos->mon_alrm) {
>> + struct rtc_time max_date = now;
>> + time64_t t_max_date;
>> + time64_t t_alrm;
>> + int max_mday;
>> + bool is_max_mday = false;
>> +
>> + /*
>> + * If the next month has more days than the current month
>> + * and we are at the max mday of this month, we can program
>> + * the alarm to go off the max mday of the next month without
>> + * it going off sooner than expected.
>> + */
>> + max_mday = rtc_month_days(now.tm_mon, now.tm_year);
>> + if (now.tm_mday == max_mday)
>> + is_max_mday = true;
>> +
>> + if (max_date.tm_mon == 11) {
>> + max_date.tm_mon = 0;
>> + max_date.tm_year += 1;
>> + } else {
>> + max_date.tm_mon += 1;
>> + }
>> + max_mday = rtc_month_days(max_date.tm_mon, max_date.tm_year);
>> + if (max_date.tm_mday > max_mday || is_max_mday)
>> + max_date.tm_mday = max_mday;
>> +
>> + max_date.tm_hour = 23;
>> + max_date.tm_min = 59;
>> + max_date.tm_sec = 59;
>> +
>
> Actually, this is wrong.
>
> If it is currently 1:23:45 on 22/09, you can go up to 1:23:44 on 22/10.
> trying to set a time after 1:23:45 will actually match on the same day
> instead of a month later.

Sorry, you are right, I initially did "current time - 1s", but then
for some reason I thought that in this case I'm also writing mday,
so I changed it to this. Obviously, if mday was also written, we
would be in the case here below...

>> + t_max_date = rtc_tm_to_time64(&max_date);
>> + t_alrm = rtc_tm_to_time64(&t->time);
>> + if (t_alrm > t_max_date) {
>> + dev_err(dev,
>> + "Alarms can be up to one month in the future\n");
>> + return -EINVAL;
>> + }
>> + } else {
>> + struct rtc_time max_date = now;
>> + time64_t t_max_date;
>> + time64_t t_alrm;
>> + int max_mday;
>> + bool allow_leap_day = false;
>> +
>> + /*
>> + * If it's the 28th of February and the next year is a leap
>> + * year, allow to set alarms for the 29th of February.
>> + */
>> + if (now.tm_mon == 1) {
>> + max_mday = rtc_month_days(now.tm_mon, now.tm_year);
>> + if (now.tm_mday == max_mday)
>> + allow_leap_day = true;
>> + }
>> +
>> + max_date.tm_year += 1;
>> + max_mday = rtc_month_days(max_date.tm_mon, max_date.tm_year);
>> + if (max_date.tm_mday > max_mday || allow_leap_day)
>> + max_date.tm_mday = max_mday;
>> +
>> + max_date.tm_hour = 23;
>> + max_date.tm_min = 59;
>> + max_date.tm_sec = 59;
>> +
>
> Ditto, 1:23:45 on 22/09/2016 can go up to 1:23:44 on 22/09/2017.

The errors are obvious now, I guess I should have looked at it
again with a fresh mind before submitting.

I think that if I remove all exceptional cases (leap years, longer
months) and go back to 'now - 1s' for the time, this should be fine.
I'll have a better look at it.

Gabriele

> Regards,
>
> --
> Alexandre Belloni, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

\
 
 \ /
  Last update: 2016-09-23 00:04    [W:0.304 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site