lkml.org 
[lkml]   [2016]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] usb: dwc3: host: inherit dma configuration from parent dev
Date
On Wednesday, September 21, 2016 11:43:59 AM CEST Sriram Dash wrote:
> >From: Arnd Bergmann [mailto:arnd@arndb.de]
> >On Wednesday, September 21, 2016 11:06:47 AM CEST Sriram Dash wrote:
>
> ==============================================================
> From 8b0dea1513e9e73a11dcfa802ddc71cca11d66f8 Mon Sep 17 00:00:00 2001
> From: Sriram Dash <sriram.dash@nxp.com>
> Date: Wed, 21 Sep 2016 11:39:30 +0530
> Subject: [PATCH] usb: xhci: Fix the patch inherit dma configuration from
> parent dev
>
> Fixes the patch https://patchwork.kernel.org/patch/9319527/
> ("usb: dwc3: host: inherit dma configuration from parent dev").
>
> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
> ---
> drivers/usb/host/xhci-mem.c | 12 ++++++------
> drivers/usb/host/xhci.c | 20 ++++++++++----------
> 2 files changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
> index 6afe323..79608df 100644
> --- a/drivers/usb/host/xhci-mem.c
> +++ b/drivers/usb/host/xhci-mem.c

All the changes you did to this file seem fine, I completely missed that part.

> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 01d96c9..9a1ff09 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -231,7 +231,7 @@ static int xhci_free_msi(struct xhci_hcd *xhci)
> static int xhci_setup_msi(struct xhci_hcd *xhci)
> {
> int ret;
> - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
> + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.sysdev);
>
> ret = pci_enable_msi(pdev);
> if (ret) {

This one is interesting as I stumbled over some code comment mentioning
that for dwc3-pci, we don't support MSI. I think with this change,
we /can/ actually support MSI, but this could be a separate patch
and we'd have to test it on dwc3-pci hardware. Same for most of
this file.

> @@ -745,7 +745,7 @@ void xhci_shutdown(struct usb_hcd *hcd)
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>
> if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
> - usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
> + usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
>
> spin_lock_irq(&xhci->lock);
> xhci_halt(xhci);

This seems obviously correct, but I don't yet see why it currently
works. We probably don't call this function on dwc3.

> #ifdef CONFIG_PM
> @@ -3605,7 +3605,7 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
> * if no devices remain.
> */
> if (xhci->quirks & XHCI_RESET_ON_RESUME)
> - pm_runtime_put_noidle(hcd->self.controller);
> + pm_runtime_put_noidle(hcd->self.sysdev);
> #endif
>
> ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);

I suspect this one is wrong, based on what Felipe explained earlier:
the power management should propagate down from the child to the
parent device.

Someone who understands this better than I do should look at it.

> @@ -3745,7 +3745,7 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
> * suspend if there is a device attached.
> */
> if (xhci->quirks & XHCI_RESET_ON_RESUME)
> - pm_runtime_get_noresume(hcd->self.controller);
> + pm_runtime_get_noresume(hcd->self.sysdev);
> #endif
>
>

Same here.

> @@ -4834,7 +4834,7 @@ int xhci_get_frame(struct usb_hcd *hcd)
> int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
> {
> struct xhci_hcd *xhci;
> - struct device *dev = hcd->self.controller;
> + struct device *dev = hcd->self.sysdev;
> int retval;


This one calls

get_quirks(dev, xhci);

not sure whether this should be called with self.controller or
self.sysdev, we should audit every one of the callers here to
be sure:

drivers/usb/host/xhci-mtk.c: return xhci_gen_setup(hcd, xhci_mtk_quirks);
drivers/usb/host/xhci-pci.c: retval = xhci_gen_setup(hcd, xhci_pci_quirks);
drivers/usb/host/xhci-plat.c: return xhci_gen_setup(hcd, xhci_plat_quirks);
drivers/usb/host/xhci-rcar.c: * xhci_gen_setup().
drivers/usb/host/xhci-tegra.c: return xhci_gen_setup(hcd, tegra_xhci_quirks);

Arnd

\
 
 \ /
  Last update: 2016-09-22 23:59    [W:0.149 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site