lkml.org 
[lkml]   [2016]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] tty/serial: atmel: fix fractional baud rate computation
Date
From: Alexey Starikovskiy <aystarik@gmail.com>

The problem with previous code was it rounded values in wrong
place and produced wrong baud rate in some cases.

Signed-off-by: Alexey Starikovskiy <aystarik@gmail.com>
[nicolas.ferre@atmel.com: port to newer kernel and add commit log]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
drivers/tty/serial/atmel_serial.c | 10 ++++++----
include/linux/atmel_serial.h | 1 +
2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 5f550d9feed9..fd8aa1f4ba78 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2170,13 +2170,15 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
* accurately. This feature is enabled only when using normal mode.
* baudrate = selected clock / (8 * (2 - OVER) * (CD + FP / 8))
* Currently, OVER is always set to 0 so we get
- * baudrate = selected clock (16 * (CD + FP / 8))
+ * baudrate = selected clock / (16 * (CD + FP / 8))
+ * then
+ * 8 CD + FP = selected clock / (2 * baudrate)
*/
if (atmel_port->has_frac_baudrate &&
(mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_NORMAL) {
- div = DIV_ROUND_CLOSEST(port->uartclk, baud);
- cd = div / 16;
- fp = DIV_ROUND_CLOSEST(div % 16, 2);
+ div = DIV_ROUND_CLOSEST(port->uartclk, baud * 2);
+ cd = div >> 3;
+ fp = div & ATMEL_US_FP_MASK;
} else {
cd = uart_get_divisor(port, baud);
}
diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h
index f8e452aa48d7..bd2560502f3c 100644
--- a/include/linux/atmel_serial.h
+++ b/include/linux/atmel_serial.h
@@ -119,6 +119,7 @@
#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
#define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */
#define ATMEL_US_FP_OFFSET 16 /* Fractional Part */
+#define ATMEL_US_FP_MASK 0x7

#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register for USART */
#define ATMEL_UA_RTOR 0x28 /* Receiver Time-out Register for UART */
--
2.9.0
\
 
 \ /
  Last update: 2016-09-22 23:59    [W:0.080 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site