lkml.org 
[lkml]   [2016]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/5] Cavium ThunderX uncore PMU support
On Fri, Sep 16, 2016 at 08:55:24AM +0100, Will Deacon wrote:
> Hi Jan,
>
> On Mon, Jul 04, 2016 at 11:11:32AM +0100, Will Deacon wrote:
> > On Tue, Jun 28, 2016 at 04:04:59PM +0200, Jan Glauber wrote:
> > > On Tue, Jun 28, 2016 at 11:24:20AM +0100, Will Deacon wrote:
> > > > On Wed, Mar 09, 2016 at 05:21:02PM +0100, Jan Glauber wrote:
> > > > > This patch series provides access to various counters on the ThunderX SOC.
> > > > >
> > > > > For details of the uncore implementation see patch #1.
> > > > >
> > > > > Patches #2-5 add the various ThunderX specific PMUs.
> > > > >
> > > > > As suggested I've put the files under drivers/perf/uncore. I would
> > > > > prefer this location over drivers/bus because not all of the uncore
> > > > > drivers are bus related.
> > > >
> > > > What's the status of these patches? Were you planning to send a new
> > > > version?
> > >
> > > I was half-way through with addressing Mark's review comments when
> > > got side-tracked.
> > >
> > > The principle question these patches raised remains open though in my
> > > opinion, how to determine the socket a device belongs to.
> > >
> > > There is no first-class interface to ask a device or the firmware
> > > which socket the device lives on.
> > >
> > > The options I see are:
> > > A) Using NUMA node information, depends on CONFIG_NUMA
> > > B) Decoding the socket bits of the PCI BAR address
> > > C) Using PCI topology information
> > >
> > > A is what I tried, but I agree that depending on CONFIG_NUMA is not a good
> > > solution. B would be easy but looks not very future-proof. So option C
> > > is what is left...
> >
> > Sorry to go full circle on this, but "depends on NUMA" sounds better
> > than deriving NUMA topology from PCI to me. The only worry I have is if
> > the NUMA information ends up being insufficient in the long-term, and we
> > end up with a mixture of the three options above in order to figure out
> > the PMU topology.
> >
> > As long as you're happy that the PMU:NUMA topology remains 1:1, then I
> > have no objections. The moment you need extra hacks on the side, we should
> > probably drop the NUMA dependency altogether and figure it out some other
> > way.
>
> Any news on this series, or did I miss a v3? I was hoping to have this in
> for 4.9, but it seems to have stalled :(
>
> Will

No news, I'm afraid it is stalled on my side :( I'll try to get back to
it, but not for 4.9.

Jan

\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.084 / U:0.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site