Messages in this thread | | | From | Han Xu <> | Date | Wed, 14 Sep 2016 14:48:42 -0500 | Subject | Re: [PATCH v3 6/9] mtd: spi-nor: Support R/W for S25FS-S family flash |
| |
On Thu, Aug 18, 2016 at 2:38 AM, Yunhui Cui <B56489@freescale.com> wrote: > From: Yunhui Cui <yunhui.cui@nxp.com> > > With the physical sectors combination, S25FS-S family flash > requires some special operations for read/write functions. > > Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> > --- > drivers/mtd/spi-nor/spi-nor.c | 56 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 56 insertions(+) > > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c > index d0fc165..495d0bb 100644 > --- a/drivers/mtd/spi-nor/spi-nor.c > +++ b/drivers/mtd/spi-nor/spi-nor.c > @@ -39,6 +39,10 @@ > > #define SPI_NOR_MAX_ID_LEN 6 > #define SPI_NOR_MAX_ADDR_WIDTH 4 > +/* Added for S25FS-S family flash */ > +#define SPINOR_CONFIG_REG3_OFFSET 0x800004 > +#define CR3V_4KB_ERASE_UNABLE 0x8 > +#define SPINOR_S25FS_FAMILY_EXT_JEDEC 0x81 > > struct flash_info { > char *name; > @@ -78,6 +82,7 @@ struct flash_info { > }; > > #define JEDEC_MFR(info) ((info)->id[0]) > +#define EXT_JEDEC(info) ((info)->id[5]) > > static const struct flash_info *spi_nor_match_id(const char *name); > > @@ -899,6 +904,7 @@ static const struct flash_info spi_nor_ids[] = { > */ > { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, > { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, > + { "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512, 0)}, > { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, > { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, > { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, > @@ -1036,6 +1042,50 @@ static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) > return ERR_PTR(-ENODEV); > } > > +/* > + * The S25FS-S family physical sectors may be configured as a > + * hybrid combination of eight 4-kB parameter sectors > + * at the top or bottom of the address space with all > + * but one of the remaining sectors being uniform size. > + * The Parameter Sector Erase commands (20h or 21h) must > + * be used to erase the 4-kB parameter sectors individually. > + * The Sector (uniform sector) Erase commands (D8h or DCh) > + * must be used to erase any of the remaining > + * sectors, including the portion of highest or lowest address > + * sector that is not overlaid by the parameter sectors. > + * The uniform sector erase command has no effect on parameter sectors. > + */ > +static int spansion_s25fs_disable_4kb_erase(struct spi_nor *nor) > +{ > + u32 cr3v_addr = SPINOR_CONFIG_REG3_OFFSET; > + u8 cr3v = 0x0; > + int ret = 0x0; > + > + nor->cmd_buf[2] = cr3v_addr >> 16; > + nor->cmd_buf[1] = cr3v_addr >> 8; > + nor->cmd_buf[0] = cr3v_addr >> 0; > + > + ret = nor->read_reg(nor, SPINOR_OP_SPANSION_RDAR, &cr3v, 1); > + if (ret) > + return ret; > + if (cr3v & CR3V_4KB_ERASE_UNABLE) > + return 0; > + ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0); > + if (ret) > + return ret; > + cr3v = CR3V_4KB_ERASE_UNABLE; > + nor->program_opcode = SPINOR_OP_SPANSION_WRAR; > + nor->write(nor, cr3v_addr, 1, &cr3v); > + > + ret = nor->read_reg(nor, SPINOR_OP_SPANSION_RDAR, &cr3v, 1); > + if (ret) > + return ret; > + if (!(cr3v & CR3V_4KB_ERASE_UNABLE)) > + return -EPERM; > + > + return 0; > +} > + > static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len, > size_t *retlen, u_char *buf) > { > @@ -1361,6 +1411,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) > spi_nor_wait_till_ready(nor); > } > > + if (EXT_JEDEC(info) == SPINOR_S25FS_FAMILY_EXT_JEDEC) { > + ret = spansion_s25fs_disable_4kb_erase(nor); > + if (ret) > + return ret; > + } > + > if (!mtd->name) > mtd->name = dev_name(dev); > mtd->priv = nor; > -- > 2.1.0.27.g96db324 > > Hi Brian, I will ack this change but still feel it's kind of hacking code.
Acked-by: Han xu <han.xu@nxp.com> > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/
-- Sincerely,
Han XU
| |