lkml.org 
[lkml]   [2016]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 08/19] thermal: sti: Remove obsolete platforms from the DT doc.
    Date
    STiH415/6 SoC's are being removed from the kernel. This
    patch removes the compatibles from the dt doc and also
    updates the example to a supported platform.

    Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
    Cc: <rui.zhang@intel.com>
    Cc: <edubezval@gmail.com>
    Cc: <robh+dt@kernel.org>
    ---
    .../devicetree/bindings/thermal/st-thermal.txt | 28 +++++++---------------
    1 file changed, 9 insertions(+), 19 deletions(-)

    diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt
    index 3b9251b..a2f9391 100644
    --- a/Documentation/devicetree/bindings/thermal/st-thermal.txt
    +++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt
    @@ -3,17 +3,8 @@ Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
    Required parameters:
    -------------------

    -compatible : st,<SoC>-<module>-thermal; should be one of:
    - "st,stih415-sas-thermal",
    - "st,stih415-mpe-thermal",
    - "st,stih416-sas-thermal"
    - "st,stih416-mpe-thermal"
    - "st,stid127-thermal" or
    - "st,stih407-thermal"
    - according to the SoC type (stih415, stih416, stid127, stih407)
    - and module type (sas or mpe). On stid127 & stih407 there is only
    - one die/module, so there is no module type in the compatible
    - string.
    +compatible : Should be "st,stih407-thermal"
    +
    clock-names : Should be "thermal".
    See: Documentation/devicetree/bindings/resource-names.txt
    clocks : Phandle of the clock used by the thermal sensor.
    @@ -25,18 +16,17 @@ Optional parameters:
    reg : For non-sysconf based sensors, this should be the physical base
    address and length of the sensor's registers.
    interrupts : Standard way to define interrupt number.
    - Interrupt is mandatory to be defined when compatible is
    - "stih416-mpe-thermal".
    NB: For thermal sensor's for which no interrupt has been
    defined, a polling delay of 1000ms will be used to read the
    temperature from device.

    Example:

    - temp1@fdfe8000 {
    - compatible = "st,stih416-mpe-thermal";
    - reg = <0xfdfe8000 0x10>;
    - clock-names = "thermal";
    - clocks = <&clk_m_mpethsens>;
    - interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>;
    + temp0@91a0000 {
    + compatible = "st,stih407-thermal";
    + reg = <0x91a0000 0x28>;
    + clock-names = "thermal";
    + clocks = <&CLK_SYSIN>;
    + interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
    + st,passive_cooling_temp = <110>;
    };
    --
    1.9.1
    \
     
     \ /
      Last update: 2016-09-17 09:59    [W:4.039 / U:0.232 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site