lkml.org 
[lkml]   [2016]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [patch v5] i2c: mux: mellanox: add driver
From
Date
On 2016-09-13 22:37, vadimp@mellanox.com wrote:
> From: Vadim Pasternak <vadimp@mellanox.com>
>
> This driver allows I2C routing controlled through CPLD select registers on
> a wide range of Mellanox systems (CPLD Lattice device).
> MUX selection is provided by digital and analog HW. Analog part is not
> under SW control.
> Digital part is under CPLD control (channel selection/de-selection).

*snip*

> +/* Platform data for the CPLD I2C multiplexers */
> +
> +/* mlxcpld_mux_plat_data - per mux data, used with i2c_register_board_info
> + * @adap_ids - adapter array
> + * @num_adaps - number of adapters
> + * @sel_reg_addr - mux select register offset in CPLD space
> + */
> +struct mlxcpld_mux_plat_data {
> + int *adap_ids;
> + int num_adaps;
> + int sel_reg_addr;
> +};
> +
> +#endif /* _LINUX_I2C_MLXCPLD_H */
>

Hmm, you never confirmed that you need to support different register
values in the CPLD with sel_reg_addr. I can see that there is a
possibility that you actually really need it, but I'd like to remove
that variable if at all possible.

If you can confirm that you need that, this is

Acked-by: Peter Rosin <peda@axentia.se>

Otherwise, please just hard code the register address.

Cheers,
Peter

\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.103 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site