lkml.org 
[lkml]   [2016]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: chipidea: Properly mark little endian descriptors
On Wed, Sep 14, 2016 at 10:37:40AM +0800, Peter Chen wrote:
> On Tue, Sep 13, 2016 at 04:06:31PM -0700, Stephen Boyd wrote:
> > The DMA descriptors are little endian, and we do a pretty good
> > job of handling them with the proper le32_to_cpu() markings, but
> > we don't actually mark them as __le32. This means checkers like
> > sparse can't easily find new bugs. Let's mark the members of
> > structures properly and fix the few places where we're missing
> > conversions.
> >
> > Cc: Peter Chen <peter.chen@nxp.com>
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
> > ---
> > drivers/usb/chipidea/udc.c | 6 +++---
> > drivers/usb/chipidea/udc.h | 12 ++++++------
> > 2 files changed, 9 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> > index 6acf4dba395e..61a65d1d05f2 100644
> > --- a/drivers/usb/chipidea/udc.c
> > +++ b/drivers/usb/chipidea/udc.c
> > @@ -364,7 +364,7 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
> > if (hwreq->req.length == 0
> > || hwreq->req.length % hwep->ep.maxpacket)
> > mul++;
> > - node->ptr->token |= mul << __ffs(TD_MULTO);
> > + node->ptr->token |= cpu_to_le32(mul << __ffs(TD_MULTO));
> > }
> >
> > temp = (u32) (hwreq->req.dma + hwreq->req.actual);
> > @@ -503,7 +503,7 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
> > if (hwreq->req.length == 0
> > || hwreq->req.length % hwep->ep.maxpacket)
> > mul++;
> > - hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
> > + hwep->qh.ptr->cap |= cpu_to_le32(mul << __ffs(QH_MULT));
> > }
> >
> > wmb(); /* synchronize before ep prime */
> > @@ -530,7 +530,7 @@ static void free_pending_td(struct ci_hw_ep *hwep)
> > static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
> > struct td_node *node)
> > {
> > - hwep->qh.ptr->td.next = node->dma;
> > + hwep->qh.ptr->td.next = cpu_to_le32(node->dma);
> > hwep->qh.ptr->td.token &=
> > cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
> >
> > diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
> > index e66df0020bd4..2ecd1174d66c 100644
> > --- a/drivers/usb/chipidea/udc.h
> > +++ b/drivers/usb/chipidea/udc.h
> > @@ -22,11 +22,11 @@
> > /* DMA layout of transfer descriptors */
> > struct ci_hw_td {
> > /* 0 */
> > - u32 next;
> > + __le32 next;
> > #define TD_TERMINATE BIT(0)
> > #define TD_ADDR_MASK (0xFFFFFFEUL << 5)
> > /* 1 */
> > - u32 token;
> > + __le32 token;
> > #define TD_STATUS (0x00FFUL << 0)
> > #define TD_STATUS_TR_ERR BIT(3)
> > #define TD_STATUS_DT_ERR BIT(5)
> > @@ -36,7 +36,7 @@ struct ci_hw_td {
> > #define TD_IOC BIT(15)
> > #define TD_TOTAL_BYTES (0x7FFFUL << 16)
> > /* 2 */
> > - u32 page[5];
> > + __le32 page[5];
> > #define TD_CURR_OFFSET (0x0FFFUL << 0)
> > #define TD_FRAME_NUM (0x07FFUL << 0)
> > #define TD_RESERVED_MASK (0x0FFFUL << 0)
> > @@ -45,18 +45,18 @@ struct ci_hw_td {
> > /* DMA layout of queue heads */
> > struct ci_hw_qh {
> > /* 0 */
> > - u32 cap;
> > + __le32 cap;
> > #define QH_IOS BIT(15)
> > #define QH_MAX_PKT (0x07FFUL << 16)
> > #define QH_ZLT BIT(29)
> > #define QH_MULT (0x0003UL << 30)
> > #define QH_ISO_MULT(x) ((x >> 11) & 0x03)
> > /* 1 */
> > - u32 curr;
> > + __le32 curr;
> > /* 2 - 8 */
> > struct ci_hw_td td;
> > /* 9 */
> > - u32 RESERVED;
> > + __le32 RESERVED;
> > struct usb_ctrlrequest setup;
> > } __attribute__ ((packed, aligned(4)));
> >
> > --

I am afraid I can't apply for testing

Applying: usb: chipidea: Properly mark little endian descriptors
fatal: sha1 information is lacking or useless
(drivers/usb/chipidea/udc.c).
error: could not build fake ancestor
Patch failed at 0001 usb: chipidea: Properly mark little endian
descriptors
The copy of the patch that failed is found in: .git/rebase-apply/patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

Would you please rebase my ci-for-usb-next branch?

--

Best Regards,
Peter Chen

\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.578 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site