lkml.org 
[lkml]   [2016]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 22/22] phy: Add support for Qualcomm's USB HS phy
On Tue, Sep 13, 2016 at 01:41:44PM -0700, Stephen Boyd wrote:
> Quoting Peter Chen (2016-09-13 00:03:58)
> > On Wed, Sep 07, 2016 at 02:35:19PM -0700, Stephen Boyd wrote:
> > > The high-speed phy on qcom SoCs is controlled via the ULPI
> > > viewport.
> > >
> >
> > Hi Stephen, I am a little puzzled how this driver co-work with chipidea
> > driver. According to nxp IC guys, the ULPI PHY's clock needs to be enabled
> > before access portsc.pts (calling hw_phymode_configure), otherwise,
> > the system will hang. But I find you call hw_phymode_configure before
> > phy->power_on, doesn't your design have this requirement?
>
> Which clk needs to be enabled? The xcvr_clk? I believe that clk
> corresponds to the "core" clk that we enable in the msm glue driver
> layer. When that clk is enabled, the ULPI phy is able to respond to
> register read/writes via the ULPI viewport.
>

The input clock for ULPI PHY, maybe it is ref_clk at this PHY driver,
so in your platform, even PHY clock is gated, you can still access
portsc.pts to configure PHY mode at controller register?

> >
> > Besides, you read ulpi id before phy->power_on, how can read work before
> > phy power on?
> >
>
> I've found that even having the link clk enabled before phy->power_on
> doesn't mean it's possible to read the id registers though. That's
> because there can be other power supplies, like regulators, which need
> to be on for the phy to operate properly.
>

Then I am puzzled the current initialization for your case, in my mind,
it should like below:

qcom_usb_hs_phy_probe->qcom_usb_hs_phy_power_on->ci_ulpi_init

Like other PHYs, it should get PHY first, then power on it, after that,
you can access its register.

--

Best Regards,
Peter Chen

\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.131 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site