lkml.org 
[lkml]   [2016]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 07/10] dmaengine: qcom_hidma: bring out interrupt cause
Date
Bring out the interrupt cause to the top level so that MSI interrupts
can be hooked at a later stage.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/hidma_ll.c | 72 +++++++++++++++++++++------------------------
1 file changed, 34 insertions(+), 38 deletions(-)

diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index c911ca2..088935f 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -397,12 +397,24 @@ static int hidma_ll_reset(struct hidma_lldev *lldev)
* requests traditionally to the destination, this concept does not apply
* here for this HW.
*/
-irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
{
- struct hidma_lldev *lldev = arg;
- u32 status;
- u32 enable;
- u32 cause;
+ if (cause & HIDMA_ERR_INT_MASK) {
+ dev_err(lldev->dev, "error 0x%x, disabling...\n",
+ cause);
+
+ /* Clear out pending interrupts */
+ writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+
+ /* No further submissions. */
+ hidma_ll_disable(lldev);
+
+ /* Driver completes the txn and intimates the client.*/
+ hidma_cleanup_pending_tre(lldev, 0xFF,
+ HIDMA_EVRE_STATUS_ERROR);
+
+ return;
+ }

/*
* Fine tuned for this HW...
@@ -412,45 +424,29 @@ irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
* interrupt delivery guarantees. Do not copy this code blindly and
* expect that to work.
*/
- status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
- enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
- cause = status & enable;
-
- while (cause) {
- if (cause & HIDMA_ERR_INT_MASK) {
- dev_err(lldev->dev, "error 0x%x, disabling...\n",
- cause);
-
- /* Clear out pending interrupts */
- writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
-
- /* No further submissions. */
- hidma_ll_disable(lldev);
-
- /* Driver completes the txn and intimates the client.*/
- hidma_cleanup_pending_tre(lldev, 0xFF,
- HIDMA_EVRE_STATUS_ERROR);
- goto out;
- }
-
+ while (atomic_read(&lldev->pending_tre_count)) {
/*
* Try to consume as many EVREs as possible.
*/
- hidma_handle_tre_completion(lldev);
+ if (hidma_handle_tre_completion(lldev, 0, 0))
+ break;
+ }

- /* We consumed TREs or there are pending TREs or EVREs. */
- writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+ /* We consumed TREs or there are pending TREs or EVREs. */
+ writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+}

- /*
- * Another interrupt might have arrived while we are
- * processing this one. Read the new cause.
- */
- status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
- enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
- cause = status & enable;
- }
+irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+{
+ struct hidma_lldev *lldev = arg;
+ u32 status;
+ u32 enable;
+ u32 cause;

-out:
+ status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
+ enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
+ cause = status & enable;
+ hidma_ll_int_handler_internal(lldev, cause);
return IRQ_HANDLED;
}

--
1.9.1
\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.085 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site