lkml.org 
[lkml]   [2016]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] ipc/sem: rework task wakeups
Date
Our sysv sems have been using the notion of lockless wakeups for a while,
ever since 0a2b9d4c796 (ipc/sem.c: move wake_up_process out of the spinlock
section), in order to reduce the sem_lock hold times. This in-house pending
queue can be replaced by wake_q (just like all the rest of ipc now), in that
it provides the following advantages:

o Simplifies and gets rid of unnecessary code.

o We get rid of the IN_WAKEUP complexities. Given that wake_q_add() grabs
reference to the task, if awoken due to an unrelated event, between the
wake_q_add() and wake_up_q() window, we cannot race with sys_exit and the
imminent call to wake_up_process().

o By not spinning IN_WAKEUP, we no longer need to disable preemption.

In consequence, the wakeup paths (after schedule(), that is) must acknowledge
an external signal/event, as well spurious wakeup occurring during the pending
wakeup window. Obviously no changes in semantics that could be visible to the
user. The fastpath is _only_ for when we know for sure that we were awoken due
to a the waker's successful semop call (queue.status is not -EINTR).

On a 48-core Haswell, running the ipcscale 'waitforzero' test, the following
is seen with increasing thread counts:

v4.8-rc5 v4.8-rc5
semopv1
Hmean sembench-sem-2 574733.00 ( 0.00%) 578322.00 ( 0.62%)
Hmean sembench-sem-8 811708.00 ( 0.00%) 824689.00 ( 1.59%)
Hmean sembench-sem-12 842448.00 ( 0.00%) 845409.00 ( 0.35%)
Hmean sembench-sem-21 933003.00 ( 0.00%) 977748.00 ( 4.80%)
Hmean sembench-sem-48 935910.00 ( 0.00%) 1004759.00 ( 7.36%)
Hmean sembench-sem-79 937186.00 ( 0.00%) 983976.00 ( 4.99%)
Hmean sembench-sem-234 974256.00 ( 0.00%) 1060294.00 ( 8.83%)
Hmean sembench-sem-265 975468.00 ( 0.00%) 1016243.00 ( 4.18%)
Hmean sembench-sem-296 991280.00 ( 0.00%) 1042659.00 ( 5.18%)
Hmean sembench-sem-327 975415.00 ( 0.00%) 1029977.00 ( 5.59%)
Hmean sembench-sem-358 1014286.00 ( 0.00%) 1049624.00 ( 3.48%)
Hmean sembench-sem-389 972939.00 ( 0.00%) 1043127.00 ( 7.21%)
Hmean sembench-sem-420 981909.00 ( 0.00%) 1056747.00 ( 7.62%)
Hmean sembench-sem-451 990139.00 ( 0.00%) 1051609.00 ( 6.21%)
Hmean sembench-sem-482 965735.00 ( 0.00%) 1040313.00 ( 7.72%)

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
---
ipc/sem.c | 268 +++++++++++++++++++-------------------------------------------
1 file changed, 83 insertions(+), 185 deletions(-)

diff --git a/ipc/sem.c b/ipc/sem.c
index a4e8bb2fae38..86467b5b78ad 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -13,6 +13,7 @@
* (c) 2003 Manfred Spraul <manfred@colorfullife.com>
* Further wakeup optimizations, documentation
* (c) 2010 Manfred Spraul <manfred@colorfullife.com>
+ * (c) 2016 Davidlohr Bueso <dave@stgolabs.net>
*
* support for audit of ipc object properties and permission changes
* Dustin Kirkland <dustin.kirkland@us.ibm.com>
@@ -53,15 +54,11 @@
* Semaphores are actively given to waiting tasks (necessary for FIFO).
* (see update_queue())
* - To improve the scalability, the actual wake-up calls are performed after
- * dropping all locks. (see wake_up_sem_queue_prepare(),
- * wake_up_sem_queue_do())
+ * dropping all locks. (see wake_up_sem_queue_prepare())
* - All work is done by the waker, the woken up task does not have to do
* anything - not even acquiring a lock or dropping a refcount.
* - A woken up task may not even touch the semaphore array anymore, it may
* have been destroyed already by a semctl(RMID).
- * - The synchronizations between wake-ups due to a timeout/signal and a
- * wake-up due to a completed semaphore operation is achieved by using an
- * intermediate state (IN_WAKEUP).
* - UNDO values are stored in an array (one per process and per
* semaphore array, lazily allocated). For backwards compatibility, multiple
* modes for the UNDO variables are supported (per process, per thread)
@@ -471,40 +468,6 @@ static inline void sem_rmid(struct ipc_namespace *ns, struct sem_array *s)
ipc_rmid(&sem_ids(ns), &s->sem_perm);
}

-/*
- * Lockless wakeup algorithm:
- * Without the check/retry algorithm a lockless wakeup is possible:
- * - queue.status is initialized to -EINTR before blocking.
- * - wakeup is performed by
- * * unlinking the queue entry from the pending list
- * * setting queue.status to IN_WAKEUP
- * This is the notification for the blocked thread that a
- * result value is imminent.
- * * call wake_up_process
- * * set queue.status to the final value.
- * - the previously blocked thread checks queue.status:
- * * if it's IN_WAKEUP, then it must wait until the value changes
- * * if it's not -EINTR, then the operation was completed by
- * update_queue. semtimedop can return queue.status without
- * performing any operation on the sem array.
- * * otherwise it must acquire the spinlock and check what's up.
- *
- * The two-stage algorithm is necessary to protect against the following
- * races:
- * - if queue.status is set after wake_up_process, then the woken up idle
- * thread could race forward and try (and fail) to acquire sma->lock
- * before update_queue had a chance to set queue.status
- * - if queue.status is written before wake_up_process and if the
- * blocked process is woken up by a signal between writing
- * queue.status and the wake_up_process, then the woken up
- * process could return from semtimedop and die by calling
- * sys_exit before wake_up_process is called. Then wake_up_process
- * will oops, because the task structure is already invalid.
- * (yes, this happened on s390 with sysv msg).
- *
- */
-#define IN_WAKEUP 1
-
/**
* newary - Create a new semaphore set
* @ns: namespace
@@ -703,51 +666,11 @@ undo:
return result;
}

-/** wake_up_sem_queue_prepare(q, error): Prepare wake-up
- * @q: queue entry that must be signaled
- * @error: Error value for the signal
- *
- * Prepare the wake-up of the queue entry q.
- */
-static void wake_up_sem_queue_prepare(struct list_head *pt,
- struct sem_queue *q, int error)
-{
- if (list_empty(pt)) {
- /*
- * Hold preempt off so that we don't get preempted and have the
- * wakee busy-wait until we're scheduled back on.
- */
- preempt_disable();
- }
- q->status = IN_WAKEUP;
- q->pid = error;
-
- list_add_tail(&q->list, pt);
-}
-
-/**
- * wake_up_sem_queue_do - do the actual wake-up
- * @pt: list of tasks to be woken up
- *
- * Do the actual wake-up.
- * The function is called without any locks held, thus the semaphore array
- * could be destroyed already and the tasks can disappear as soon as the
- * status is set to the actual return code.
- */
-static void wake_up_sem_queue_do(struct list_head *pt)
+static inline void wake_up_sem_queue_prepare(struct sem_queue *q, int error,
+ struct wake_q_head *wake_q)
{
- struct sem_queue *q, *t;
- int did_something;
-
- did_something = !list_empty(pt);
- list_for_each_entry_safe(q, t, pt, list) {
- wake_up_process(q->sleeper);
- /* q can disappear immediately after writing q->status. */
- smp_wmb();
- q->status = q->pid;
- }
- if (did_something)
- preempt_enable();
+ wake_q_add(wake_q, q->sleeper);
+ q->status = error;
}

static void unlink_queue(struct sem_array *sma, struct sem_queue *q)
@@ -795,18 +718,18 @@ static int check_restart(struct sem_array *sma, struct sem_queue *q)
* wake_const_ops - wake up non-alter tasks
* @sma: semaphore array.
* @semnum: semaphore that was modified.
- * @pt: list head for the tasks that must be woken up.
+ * @wake_q: lockless wake-queue head.
*
* wake_const_ops must be called after a semaphore in a semaphore array
* was set to 0. If complex const operations are pending, wake_const_ops must
* be called with semnum = -1, as well as with the number of each modified
* semaphore.
- * The tasks that must be woken up are added to @pt. The return code
+ * The tasks that must be woken up are added to @wake_q. The return code
* is stored in q->pid.
* The function returns 1 if at least one operation was completed successfully.
*/
static int wake_const_ops(struct sem_array *sma, int semnum,
- struct list_head *pt)
+ struct wake_q_head *wake_q)
{
struct sem_queue *q;
struct list_head *walk;
@@ -832,7 +755,7 @@ static int wake_const_ops(struct sem_array *sma, int semnum,

unlink_queue(sma, q);

- wake_up_sem_queue_prepare(pt, q, error);
+ wake_up_sem_queue_prepare(q, error, wake_q);
if (error == 0)
semop_completed = 1;
}
@@ -845,14 +768,14 @@ static int wake_const_ops(struct sem_array *sma, int semnum,
* @sma: semaphore array
* @sops: operations that were performed
* @nsops: number of operations
- * @pt: list head of the tasks that must be woken up.
+ * @wake_q: lockless wake-queue head
*
* Checks all required queue for wait-for-zero operations, based
* on the actual changes that were performed on the semaphore array.
* The function returns 1 if at least one operation was completed successfully.
*/
static int do_smart_wakeup_zero(struct sem_array *sma, struct sembuf *sops,
- int nsops, struct list_head *pt)
+ int nsops, struct wake_q_head *wake_q)
{
int i;
int semop_completed = 0;
@@ -865,7 +788,7 @@ static int do_smart_wakeup_zero(struct sem_array *sma, struct sembuf *sops,

if (sma->sem_base[num].semval == 0) {
got_zero = 1;
- semop_completed |= wake_const_ops(sma, num, pt);
+ semop_completed |= wake_const_ops(sma, num, wake_q);
}
}
} else {
@@ -876,7 +799,7 @@ static int do_smart_wakeup_zero(struct sem_array *sma, struct sembuf *sops,
for (i = 0; i < sma->sem_nsems; i++) {
if (sma->sem_base[i].semval == 0) {
got_zero = 1;
- semop_completed |= wake_const_ops(sma, i, pt);
+ semop_completed |= wake_const_ops(sma, i, wake_q);
}
}
}
@@ -885,7 +808,7 @@ static int do_smart_wakeup_zero(struct sem_array *sma, struct sembuf *sops,
* then check the global queue, too.
*/
if (got_zero)
- semop_completed |= wake_const_ops(sma, -1, pt);
+ semop_completed |= wake_const_ops(sma, -1, wake_q);

return semop_completed;
}
@@ -895,19 +818,19 @@ static int do_smart_wakeup_zero(struct sem_array *sma, struct sembuf *sops,
* update_queue - look for tasks that can be completed.
* @sma: semaphore array.
* @semnum: semaphore that was modified.
- * @pt: list head for the tasks that must be woken up.
+ * @wake_q: lockless wake-queue head.
*
* update_queue must be called after a semaphore in a semaphore array
* was modified. If multiple semaphores were modified, update_queue must
* be called with semnum = -1, as well as with the number of each modified
* semaphore.
- * The tasks that must be woken up are added to @pt. The return code
+ * The tasks that must be woken up are added to @wake_q. The return code
* is stored in q->pid.
* The function internally checks if const operations can now succeed.
*
* The function return 1 if at least one semop was completed successfully.
*/
-static int update_queue(struct sem_array *sma, int semnum, struct list_head *pt)
+static int update_queue(struct sem_array *sma, int semnum, struct wake_q_head *wake_q)
{
struct sem_queue *q;
struct list_head *walk;
@@ -949,11 +872,11 @@ again:
restart = 0;
} else {
semop_completed = 1;
- do_smart_wakeup_zero(sma, q->sops, q->nsops, pt);
+ do_smart_wakeup_zero(sma, q->sops, q->nsops, wake_q);
restart = check_restart(sma, q);
}

- wake_up_sem_queue_prepare(pt, q, error);
+ wake_up_sem_queue_prepare(q, error, wake_q);
if (restart)
goto again;
}
@@ -984,24 +907,24 @@ static void set_semotime(struct sem_array *sma, struct sembuf *sops)
* @sops: operations that were performed
* @nsops: number of operations
* @otime: force setting otime
- * @pt: list head of the tasks that must be woken up.
+ * @wake_q: lockless wake-queue head
*
* do_smart_update() does the required calls to update_queue and wakeup_zero,
* based on the actual changes that were performed on the semaphore array.
* Note that the function does not do the actual wake-up: the caller is
- * responsible for calling wake_up_sem_queue_do(@pt).
+ * responsible for calling wake_up_q().
* It is safe to perform this call after dropping all locks.
*/
static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsops,
- int otime, struct list_head *pt)
+ int otime, struct wake_q_head *wake_q)
{
int i;

- otime |= do_smart_wakeup_zero(sma, sops, nsops, pt);
+ otime |= do_smart_wakeup_zero(sma, sops, nsops, wake_q);

if (!list_empty(&sma->pending_alter)) {
/* semaphore array uses the global queue - just process it. */
- otime |= update_queue(sma, -1, pt);
+ otime |= update_queue(sma, -1, wake_q);
} else {
if (!sops) {
/*
@@ -1009,7 +932,7 @@ static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsop
* known. Check all.
*/
for (i = 0; i < sma->sem_nsems; i++)
- otime |= update_queue(sma, i, pt);
+ otime |= update_queue(sma, i, wake_q);
} else {
/*
* Check the semaphores that were increased:
@@ -1023,7 +946,7 @@ static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsop
for (i = 0; i < nsops; i++) {
if (sops[i].sem_op > 0) {
otime |= update_queue(sma,
- sops[i].sem_num, pt);
+ sops[i].sem_num, wake_q);
}
}
}
@@ -1111,8 +1034,8 @@ static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
struct sem_undo *un, *tu;
struct sem_queue *q, *tq;
struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
- struct list_head tasks;
int i;
+ WAKE_Q(wake_q);

/* Free the existing undo structures for this semaphore set. */
ipc_assert_locked_object(&sma->sem_perm);
@@ -1126,25 +1049,24 @@ static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
}

/* Wake up all pending processes and let them fail with EIDRM. */
- INIT_LIST_HEAD(&tasks);
list_for_each_entry_safe(q, tq, &sma->pending_const, list) {
unlink_queue(sma, q);
- wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
+ wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
}

list_for_each_entry_safe(q, tq, &sma->pending_alter, list) {
unlink_queue(sma, q);
- wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
+ wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
}
for (i = 0; i < sma->sem_nsems; i++) {
struct sem *sem = sma->sem_base + i;
list_for_each_entry_safe(q, tq, &sem->pending_const, list) {
unlink_queue(sma, q);
- wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
+ wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
}
list_for_each_entry_safe(q, tq, &sem->pending_alter, list) {
unlink_queue(sma, q);
- wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
+ wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
}
}

@@ -1153,7 +1075,7 @@ static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
sem_unlock(sma, -1);
rcu_read_unlock();

- wake_up_sem_queue_do(&tasks);
+ wake_up_q(&wake_q);
ns->used_sems -= sma->sem_nsems;
ipc_rcu_putref(sma, sem_rcu_free);
}
@@ -1292,9 +1214,9 @@ static int semctl_setval(struct ipc_namespace *ns, int semid, int semnum,
struct sem_undo *un;
struct sem_array *sma;
struct sem *curr;
- int err;
- struct list_head tasks;
- int val;
+ int err, val;
+ WAKE_Q(wake_q);
+
#if defined(CONFIG_64BIT) && defined(__BIG_ENDIAN)
/* big-endian 64bit */
val = arg >> 32;
@@ -1306,8 +1228,6 @@ static int semctl_setval(struct ipc_namespace *ns, int semid, int semnum,
if (val > SEMVMX || val < 0)
return -ERANGE;

- INIT_LIST_HEAD(&tasks);
-
rcu_read_lock();
sma = sem_obtain_object_check(ns, semid);
if (IS_ERR(sma)) {
@@ -1350,10 +1270,10 @@ static int semctl_setval(struct ipc_namespace *ns, int semid, int semnum,
curr->sempid = task_tgid_vnr(current);
sma->sem_ctime = get_seconds();
/* maybe some queued-up processes were waiting for this */
- do_smart_update(sma, NULL, 0, 0, &tasks);
+ do_smart_update(sma, NULL, 0, 0, &wake_q);
sem_unlock(sma, -1);
rcu_read_unlock();
- wake_up_sem_queue_do(&tasks);
+ wake_up_q(&wake_q);
return 0;
}

@@ -1365,9 +1285,7 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
int err, nsems;
ushort fast_sem_io[SEMMSL_FAST];
ushort *sem_io = fast_sem_io;
- struct list_head tasks;
-
- INIT_LIST_HEAD(&tasks);
+ WAKE_Q(wake_q);

rcu_read_lock();
sma = sem_obtain_object_check(ns, semid);
@@ -1478,7 +1396,7 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
}
sma->sem_ctime = get_seconds();
/* maybe some queued-up processes were waiting for this */
- do_smart_update(sma, NULL, 0, 0, &tasks);
+ do_smart_update(sma, NULL, 0, 0, &wake_q);
err = 0;
goto out_unlock;
}
@@ -1514,7 +1432,7 @@ out_unlock:
sem_unlock(sma, -1);
out_rcu_wakeup:
rcu_read_unlock();
- wake_up_sem_queue_do(&tasks);
+ wake_up_q(&wake_q);
out_free:
if (sem_io != fast_sem_io)
ipc_free(sem_io);
@@ -1787,32 +1705,6 @@ out:
return un;
}

-
-/**
- * get_queue_result - retrieve the result code from sem_queue
- * @q: Pointer to queue structure
- *
- * Retrieve the return code from the pending queue. If IN_WAKEUP is found in
- * q->status, then we must loop until the value is replaced with the final
- * value: This may happen if a task is woken up by an unrelated event (e.g.
- * signal) and in parallel the task is woken up by another task because it got
- * the requested semaphores.
- *
- * The function can be called with or without holding the semaphore spinlock.
- */
-static int get_queue_result(struct sem_queue *q)
-{
- int error;
-
- error = q->status;
- while (unlikely(error == IN_WAKEUP)) {
- cpu_relax();
- error = q->status;
- }
-
- return error;
-}
-
SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
unsigned, nsops, const struct timespec __user *, timeout)
{
@@ -1825,7 +1717,6 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
struct sem_queue queue;
unsigned long jiffies_left = 0;
struct ipc_namespace *ns;
- struct list_head tasks;

ns = current->nsproxy->ipc_ns;

@@ -1865,7 +1756,6 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
alter = 1;
}

- INIT_LIST_HEAD(&tasks);

if (undos) {
/* On success, find_alloc_undo takes the rcu_read_lock */
@@ -1933,22 +1823,32 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
queue.alter = alter;

error = perform_atomic_semop(sma, &queue);
- if (error == 0) {
- /* If the operation was successful, then do
+ if (error <= 0) { /* non-blocking path */
+ WAKE_Q(wake_q);
+
+ /*
+ * If the operation was successful, then do
* the required updates.
*/
- if (alter)
- do_smart_update(sma, sops, nsops, 1, &tasks);
- else
- set_semotime(sma, sops);
+ if (error == 0) {
+ if (alter)
+ do_smart_update(sma, sops, nsops, 1, &wake_q);
+ else
+ set_semotime(sma, sops);
+
+ }
+
+ sem_unlock(sma, locknum);
+ rcu_read_unlock();
+ wake_up_q(&wake_q);
+
+ goto out_free;
}
- if (error <= 0)
- goto out_unlock_free;

- /* We need to sleep on this operation, so we put the current
+ /*
+ * We need to sleep on this operation, so we put the current
* task into the pending queue and go to sleep.
*/
-
if (nsops == 1) {
struct sem *curr;
curr = &sma->sem_base[sops->sem_num];
@@ -1977,10 +1877,10 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
sma->complex_count++;
}

+sleep_again:
queue.status = -EINTR;
queue.sleeper = current;

-sleep_again:
__set_current_state(TASK_INTERRUPTIBLE);
sem_unlock(sma, locknum);
rcu_read_unlock();
@@ -1990,28 +1890,29 @@ sleep_again:
else
schedule();

- error = get_queue_result(&queue);
-
- if (error != -EINTR) {
- /* fast path: update_queue already obtained all requested
- * resources.
- * Perform a smp_mb(): User space could assume that semop()
- * is a memory barrier: Without the mb(), the cpu could
- * speculatively read in user space stale data that was
- * overwritten by the previous owner of the semaphore.
+ /*
+ * fastpath: the semop has completed, either successfully or not, from
+ * the syscall pov, is quite irrelevant to us at this point; we're done.
+ *
+ * We _do_ care, nonetheless, about being awoken by a signal or spuriously.
+ * The queue.status is checked again in the slowpath (aka after taking
+ * sem_lock), such that we can detect scenarios where we were awakened
+ * externally, during the window between wake_q_add() and wake_up_q().
+ */
+ if ((error = queue.status) != -EINTR && !signal_pending(current)) {
+ /*
+ * User space could assume that semop() is a memory barrier:
+ * Without the mb(), the cpu could speculatively read in user
+ * space stale data that was overwritten by the previous owner
+ * of the semaphore.
*/
smp_mb();
-
goto out_free;
}

rcu_read_lock();
sma = sem_obtain_lock(ns, semid, sops, nsops, &locknum);
-
- /*
- * Wait until it's guaranteed that no wakeup_sem_queue_do() is ongoing.
- */
- error = get_queue_result(&queue);
+ error = queue.status;

/*
* Array removed? If yes, leave without sem_unlock().
@@ -2021,7 +1922,6 @@ sleep_again:
goto out_free;
}

-
/*
* If queue.status != -EINTR we are woken up by another process.
* Leave without unlink_queue(), but with sem_unlock().
@@ -2030,13 +1930,13 @@ sleep_again:
goto out_unlock_free;

/*
- * If an interrupt occurred we have to clean up the queue
+ * If an interrupt occurred we have to clean up the queue.
*/
if (timeout && jiffies_left == 0)
error = -EAGAIN;

/*
- * If the wakeup was spurious, just retry
+ * If the wakeup was spurious, just retry.
*/
if (error == -EINTR && !signal_pending(current))
goto sleep_again;
@@ -2046,7 +1946,6 @@ sleep_again:
out_unlock_free:
sem_unlock(sma, locknum);
rcu_read_unlock();
- wake_up_sem_queue_do(&tasks);
out_free:
if (sops != fast_sops)
kfree(sops);
@@ -2107,8 +2006,8 @@ void exit_sem(struct task_struct *tsk)
for (;;) {
struct sem_array *sma;
struct sem_undo *un;
- struct list_head tasks;
int semid, i;
+ WAKE_Q(wake_q);

rcu_read_lock();
un = list_entry_rcu(ulp->list_proc.next,
@@ -2194,11 +2093,10 @@ void exit_sem(struct task_struct *tsk)
}
}
/* maybe some queued-up processes were waiting for this */
- INIT_LIST_HEAD(&tasks);
- do_smart_update(sma, NULL, 0, 1, &tasks);
+ do_smart_update(sma, NULL, 0, 1, &wake_q);
sem_unlock(sma, -1);
rcu_read_unlock();
- wake_up_sem_queue_do(&tasks);
+ wake_up_q(&wake_q);

kfree_rcu(un, rcu);
}
--
2.6.6
\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.101 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site