lkml.org 
[lkml]   [2016]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [patch v1] x86/platform/mellanox: introduce support for Mellanox systems platform
Date


> -----Original Message-----
> From: H. Peter Anvin [mailto:hpa@zytor.com]
> Sent: Monday, September 12, 2016 7:42 AM
> To: Vadim Pasternak <vadimp@mellanox.com>; tglx@linutronix.de
> Cc: mingo@redhat.com; davem@davemloft.net; geert@linux-m68k.org;
> akpm@linux-foundation.org; gregkh@linuxfoundation.org;
> kvalo@codeaurora.org; mchehab@kernel.org; linux@roeck-us.net;
> x86@kernel.org; linux-kernel@vger.kernel.org; platform-driver-
> x86@vger.kernel.org; jiri@resnulli.us
> Subject: Re: [patch v1] x86/platform/mellanox: introduce support for Mellanox
> systems platform
>
> On September 11, 2016 11:29:58 PM PDT, vadimp@mellanox.com wrote:
> >From: Vadim Pasternak <vadimp@mellanox.com>
> >
> >Enable system support for the Mellanox Technologies platform, which
> >provides support for the next Mellanox basic systems: "msx6710",
> >"msx6720", "msb7700", "msn2700", "msx1410", "msn2410", "msb7800",
> >"msn2740", "msn2100" and also various number of derivative systems from
> >the above basic types.
> >
> >The Kconfig currently controlling compilation of this code is:
> >arch/x86/platform:config MLX_PLATFORM
> >arch/x86/platform: tristate "Mellanox Technologies platform
> >support"
> >
> >Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
> >---
> > MAINTAINERS | 7 +
> > arch/x86/Kconfig | 23 ++
> > arch/x86/platform/Makefile | 1 +
> > arch/x86/platform/mellanox/Makefile | 1 +
> >arch/x86/platform/mellanox/mlx-platform.c | 501
> >++++++++++++++++++++++++++++++
> > 5 files changed, 533 insertions(+)
> > create mode 100644 arch/x86/platform/mellanox/Makefile
> > create mode 100644 arch/x86/platform/mellanox/mlx-platform.c
> >
> >diff --git a/MAINTAINERS b/MAINTAINERS
> >index 4705c94..8a675de 100644
> >--- a/MAINTAINERS
> >+++ b/MAINTAINERS
> >@@ -7664,6 +7664,13 @@ W: http://www.mellanox.com
> > Q: http://patchwork.ozlabs.org/project/netdev/list/
> > F: drivers/net/ethernet/mellanox/mlxsw/
> >
> >+MELLANOX PLATFORM DRIVER
> >+M: Vadim Pasternak <vadimp@mellanox.com>
> >+L: platform-driver-x86@vger.kernel.org
> >+S: Supported
> >+W: http://www.mellanox.com
> >+F: arch/x86/platform/mellanox/mlx-platform.c
> >+
> > SOFT-ROCE DRIVER (rxe)
> > M: Moni Shoua <monis@mellanox.com>
> > L: linux-rdma@vger.kernel.org
> >diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index
> >c580d8c..cc7efdd9 100644
> >--- a/arch/x86/Kconfig
> >+++ b/arch/x86/Kconfig
> >@@ -2631,6 +2631,29 @@ config TS5500
> >
> > endif # X86_32
> >
> >+config MLX_PLATFORM
> >+ tristate "Mellanox Technologies platform support"
> >+ depends on X86_64
> >+ depends on PCI
> >+ depends on DMI
> >+ depends on I2C_MLXCPLD
> >+ depends on I2C_MUX_REG
> >+ select HWMON
> >+ select PMBUS
> >+ select LM75
> >+ select NEW_LEDS
> >+ select LEDS_CLASS
> >+ select LEDS_TRIGGERS
> >+ select LEDS_TRIGGER_TIMER
> >+ select LEDS_MLXCPLD
> >+ ---help---
> >+ This option enables system support for the Mellanox Technologies
> >+ platform.
> >+
> >+ Say Y here if you are building a kernel for Mellanox system.
> >+
> >+ Otherwise, say N.
> >+
> > config AMD_NB
> > def_bool y
> > depends on CPU_SUP_AMD && PCI
> >diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
> >index 184842e..3c3c19e 100644
> >--- a/arch/x86/platform/Makefile
> >+++ b/arch/x86/platform/Makefile
> >@@ -8,6 +8,7 @@ obj-y += iris/
> > obj-y += intel/
> > obj-y += intel-mid/
> > obj-y += intel-quark/
> >+obj-y += mellanox/
> > obj-y += olpc/
> > obj-y += scx200/
> > obj-y += sfi/
> >diff --git a/arch/x86/platform/mellanox/Makefile
> >b/arch/x86/platform/mellanox/Makefile
> >new file mode 100644
> >index 0000000..f43c931
> >--- /dev/null
> >+++ b/arch/x86/platform/mellanox/Makefile
> >@@ -0,0 +1 @@
> >+obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o
> >diff --git a/arch/x86/platform/mellanox/mlx-platform.c
> >b/arch/x86/platform/mellanox/mlx-platform.c
> >new file mode 100644
> >index 0000000..02afa89
> >--- /dev/null
> >+++ b/arch/x86/platform/mellanox/mlx-platform.c
> >@@ -0,0 +1,501 @@
> >+/*
> >+ * arch/x86/platform/mellanox/mlx-platform.c
> >+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
> >+ * Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
> >+ *
> >+ * Redistribution and use in source and binary forms, with or without
> >+ * modification, are permitted provided that the following conditions
> >are met:
> >+ *
> >+ * 1. Redistributions of source code must retain the above copyright
> >+ * notice, this list of conditions and the following disclaimer.
> >+ * 2. Redistributions in binary form must reproduce the above
> >copyright
> >+ * notice, this list of conditions and the following disclaimer in
> >the
> >+ * documentation and/or other materials provided with the
> >distribution.
> >+ * 3. Neither the names of the copyright holders nor the names of its
> >+ * contributors may be used to endorse or promote products derived
> >from
> >+ * this software without specific prior written permission.
> >+ *
> >+ * Alternatively, this software may be distributed under the terms of
> >the
> >+ * GNU General Public License ("GPL") version 2 as published by the
> >Free
> >+ * Software Foundation.
> >+ *
> >+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> >"AS IS"
> >+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> LIMITED
> >TO, THE
> >+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
> PARTICULAR
> >PURPOSE
> >+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
> >CONTRIBUTORS BE
> >+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> >+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
> PROCUREMENT
> >OF
> >+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
> >BUSINESS
> >+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
> >WHETHER IN
> >+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
> >OTHERWISE)
> >+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> >OF THE
> >+ * POSSIBILITY OF SUCH DAMAGE.
> >+ */
> >+
> >+#include <linux/acpi.h>
> >+#include <linux/device.h>
> >+#include <linux/i2c.h>
> >+#include <linux/i2c-mux.h>
> >+#include <linux/module.h>
> >+#include <linux/of_platform.h>
> >+#include <linux/platform_device.h>
> >+#include <linux/platform_data/i2c-mux-reg.h>
> >+#include <linux/pci.h>
> >+#include <linux/slab.h>
> >+#include <linux/version.h>
> >+
> >+#define MLX_PLAT_DEVICE_NAME "mlxplat"
> >+
> >+/* LPC IFC in PCH defines */
> >+#define MLXPLAT_CPLD_LPC_I2C_BASE_ADRR 0x2000
> >+#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500
> >+#define MLXPLAT_CPLD_LPC_CTRL_IFC_BUS_ID 0
> >+#define MLXPLAT_CPLD_LPC_CTRL_IFC_SLOT_ID 31
> >+#define MLXPLAT_CPLD_LPC_CTRL_IFC_FUNC_ID 0
> >+#define MLXPLAT_CPLD_LPC_QM67_DEV_ID 0x1c4f
> >+#define MLXPLAT_CPLD_LPC_QM77_DEV_ID 0x1e55
> >+#define MLXPLAT_CPLD_LPC_RNG_DEV_ID 0x1f38
> >+#define MLXPLAT_CPLD_LPC_I2C_CH1_OFF 0xdb
> >+#define MLXPLAT_CPLD_LPC_I2C_CH2_OFF 0xda
> >+#define MLXPLAT_CPLD_LPC_PIO_OFFSET 0x10000UL
> >+#define MLXPLAT_CPLD_LPC_REG1
> ((MLXPLAT_CPLD_LPC_REG_BASE_ADRR + \
> >+ MLXPLAT_CPLD_LPC_I2C_CH1_OFF) | \
> >+ MLXPLAT_CPLD_LPC_PIO_OFFSET)
> >+#define MLXPLAT_CPLD_LPC_REG2
> ((MLXPLAT_CPLD_LPC_REG_BASE_ADRR + \
> >+ MLXPLAT_CPLD_LPC_I2C_CH2_OFF) | \
> >+ MLXPLAT_CPLD_LPC_PIO_OFFSET)
> >+
> >+/* Use generic decode range 4 for CPLD LPC */
> >+#define MLXPLAT_CPLD_LPC_PCH_GEN_DEC_RANGE4 0x90
> >+#define MLXPLAT_CPLD_LPC_PCH_GEN_DEC_BASE 0x84
> >+#define MLXPLAT_CPLD_LPC_RNG_CTRL 0x84
> >+#define MLXPLAT_CPLD_LPC_PCH_GEN_DEC_RANGES 4
> >+#define MLXPLAT_CPLD_LPC_I2C_RANGE 2
> >+#define MLXPLAT_CPLD_LPC_RANGE 3
> >+#define MLXPLAT_CPLD_LPC_CLKS_EN 0
> >+#define MLXPLAT_CPLD_LPC_IO_RANGE 0x100
> >+
> >+/* Start channel numbers */
> >+#define MLXPLAT_CPLD_CH1 2
> >+#define MLXPLAT_CPLD_CH2 10
> >+
> >+/* mlxplat_priv - board private data
> >+ * @lpc_reg - register space
> >+ * @dev_id - platform device id
> >+ * @lpc_i2c_res- lpc cpld i2c resource space
> >+ * @lpc_cpld_res - lpc cpld register resource space
> >+ * @pdev - platform device
> >+ */
> >+struct mlxplat_priv {
> >+ u32 lpc_reg[MLXPLAT_CPLD_LPC_PCH_GEN_DEC_RANGES];
> >+ u16 dev_id;
> >+ struct resource *lpc_i2c_res;
> >+ struct resource *lpc_cpld_res;
> >+ struct platform_device *pdev;
> >+ struct platform_device *pdev_i2c;
> >+};
> >+
> >+/* Regions for LPC I2C controller and LPC base register space */
> >+static struct resource mlxplat_lpc_resources[] = {
> >+ [0] = DEFINE_RES_NAMED(MLXPLAT_CPLD_LPC_I2C_BASE_ADRR,
> >+ MLXPLAT_CPLD_LPC_IO_RANGE,
> >+ "mlxplat_cpld_lpc_i2c_ctrl", IORESOURCE_IO),
> >+ [1] = DEFINE_RES_NAMED(MLXPLAT_CPLD_LPC_REG_BASE_ADRR,
> >+ MLXPLAT_CPLD_LPC_IO_RANGE,
> >+ "mlxplat_cpld_lpc_regs",
> >+ IORESOURCE_IO),
> >+};
> >+
> >+/* Platfform channels */
> >+static int mlxplat_channels[][8] = {
> >+ {
> >+ MLXPLAT_CPLD_CH1, MLXPLAT_CPLD_CH1 + 1,
> MLXPLAT_CPLD_CH1 + 2,
> >+ MLXPLAT_CPLD_CH1 + 3, MLXPLAT_CPLD_CH1 + 4,
> MLXPLAT_CPLD_CH1 +
> >+ 5, MLXPLAT_CPLD_CH1 + 6, MLXPLAT_CPLD_CH1 + 7
> >+ },
> >+ {
> >+ MLXPLAT_CPLD_CH2, MLXPLAT_CPLD_CH2 + 1,
> MLXPLAT_CPLD_CH2 + 2,
> >+ MLXPLAT_CPLD_CH2 + 3, MLXPLAT_CPLD_CH2 + 4,
> MLXPLAT_CPLD_CH2 +
> >+ + 5, MLXPLAT_CPLD_CH2 + 6, MLXPLAT_CPLD_CH2 + 7
> >+ },
> >+};
> >+
> >+/* Platform mux data */
> >+struct i2c_mux_reg_platform_data mlxplat_mux_data[] = {
> >+ {
> >+ .parent = 1,
> >+ .base_nr = MLXPLAT_CPLD_CH1,
> >+ .write_only = 1,
> >+ .values = mlxplat_channels[0],
> >+ .n_values = ARRAY_SIZE(mlxplat_channels[0]),
> >+ .reg = (void __iomem *)MLXPLAT_CPLD_LPC_REG1,
> >+ .reg_size = 1,
> >+ .idle_in_use = 1,
> >+ },
> >+ {
> >+ .parent = 1,
> >+ .base_nr = MLXPLAT_CPLD_CH2,
> >+ .write_only = 1,
> >+ .values = mlxplat_channels[1],
> >+ .n_values = ARRAY_SIZE(mlxplat_channels[1]),
> >+ .reg = (void __iomem *)MLXPLAT_CPLD_LPC_REG2,
> >+ .reg_size = 1,
> >+ .idle_in_use = 1,
> >+ },
> >+
> >+};
> >+
> >+/* mlxplat_topology - platform entry data:
> >+ * @pdev - platform device
> >+ * @name - platform device name
> >+ */
> >+struct mlxplat_topology {
> >+ struct platform_device *pdev;
> >+ const char *name;
> >+};
> >+
> >+/* Platform topology */
> >+struct mlxplat_topology mlxplat_topo[] = {
> >+ {
> >+ .name = "i2c-mux-reg",
> >+ },
> >+ {
> >+ .name = "i2c-mux-reg",
> >+ },
> >+};
> >+
> >+struct platform_device *mlxplat_dev;
> >+
> >+static int mlxplat_lpc_i2c_dec_range_config(struct mlxplat_priv *priv,
> >+ struct pci_dev *pdev, u8 range,
> >+ u16 base_addr)
> >+{
> >+ u16 rng_reg;
> >+ u32 val;
> >+ int err;
> >+
> >+ if (range >= MLXPLAT_CPLD_LPC_PCH_GEN_DEC_RANGES) {
> >+ dev_err(&priv->pdev->dev, "Incorrect LPC decode range %d >
> %d\n",
> >+ range, MLXPLAT_CPLD_LPC_PCH_GEN_DEC_RANGES);
> >+ return -ERANGE;
> >+ }
> >+
> >+ rng_reg = MLXPLAT_CPLD_LPC_PCH_GEN_DEC_BASE + 4 * range;
> >+ err = pci_read_config_dword(pdev, rng_reg, &val);
> >+ if (err) {
> >+ dev_err(&priv->pdev->dev, "Access to LPC_PCH config failed,
> err
> >%d\n",
> >+ err);
> >+ return -EFAULT;
> >+ }
> >+ priv->lpc_reg[range] = val;
> >+
> >+ /* Clean all bits excepted reserved (reserved: 2, 16, 17 , 24 - 31).
> >*/
> >+ val &= 0xff030002;
> >+ /* Set bits 18 - 23 to allow decode range address mask, set bit 1 to
> >+ * enable decode range, clear bit 1,2 in base address.
> >+ */
> >+ val |= 0xfc0001 | (base_addr & 0xfff3);
> >+ err = pci_write_config_dword(pdev, rng_reg, val);
> >+ if (err)
> >+ dev_err(&priv->pdev->dev, "Config of LPC_PCH Generic Decode
> Range %d
> >failed, err %d\n",
> >+ range, err);
> >+
> >+ return err;
> >+}
> >+
> >+static void mlxplat_lpc_dec_rng_config_clean(struct pci_dev *pdev, u32
> >val,
> >+ u8 range)
> >+{
> >+ /* Restore old value */
> >+ if (pci_write_config_dword(pdev,
> (MLXPLAT_CPLD_LPC_PCH_GEN_DEC_BASE +
> >+ range * 4), val))
> >+ dev_err(&pdev->dev, "Deconfig of LPC_PCH Generic Decode
> Range %x
> >failed\n",
> >+ range);
> >+
> >+}
> >+
> >+static int mlxplat_lpc_request_region(struct mlxplat_priv *priv,
> >+ struct resource *res)
> >+{
> >+ resource_size_t size = resource_size(res);
> >+
> >+ if (!devm_request_region(&priv->pdev->dev, res->start, size,
> >+ res->name)) {
> >+ devm_release_region(&priv->pdev->dev, res->start, size);
> >+
> >+ if (!devm_request_region(&priv->pdev->dev, res->start, size,
> >+ res->name)) {
> >+ dev_err(&priv->pdev->dev, "Request ioregion 0x%llx len
> 0x%llx for
> >%s fail\n",
> >+ res->start, size, res->name);
> >+ return -EIO;
> >+ }
> >+ }
> >+
> >+ return 0;
> >+}
> >+
> >+static int mlxplat_lpc_request_regions(struct mlxplat_priv *priv) {
> >+ int i;
> >+ int err;
> >+
> >+ for (i = 0; i < ARRAY_SIZE(mlxplat_lpc_resources); i++) {
> >+ err = mlxplat_lpc_request_region(priv,
> >+ &mlxplat_lpc_resources[i]);
> >+ if (err)
> >+ return err;
> >+ }
> >+
> >+ priv->lpc_i2c_res = &mlxplat_lpc_resources[0];
> >+ priv->lpc_cpld_res = &mlxplat_lpc_resources[1];
> >+
> >+ return 0;
> >+}
> >+
> >+static int mlxplat_lpc_ivb_config(struct mlxplat_priv *priv,
> >+ struct pci_dev *pdev)
> >+{
> >+ int err;
> >+
> >+ err = mlxplat_lpc_i2c_dec_range_config(priv, pdev,
> >+ MLXPLAT_CPLD_LPC_I2C_RANGE,
> >+
> MLXPLAT_CPLD_LPC_I2C_BASE_ADRR);
> >+ if (err) {
> >+ dev_err(&priv->pdev->dev, "LPC decode range %d config failed,
> err
> >%d\n",
> >+ MLXPLAT_CPLD_LPC_I2C_RANGE, err);
> >+ pci_dev_put(pdev);
> >+ return -EFAULT;
> >+ }
> >+
> >+ err = mlxplat_lpc_i2c_dec_range_config(priv, pdev,
> >+ MLXPLAT_CPLD_LPC_RANGE,
> >+
> MLXPLAT_CPLD_LPC_REG_BASE_ADRR);
> >+ if (err) {
> >+ dev_err(&priv->pdev->dev, "LPC decode range %d config failed,
> err
> >%d\n",
> >+ MLXPLAT_CPLD_LPC_I2C_RANGE, err);
> >+ return -EFAULT;
> >+ }
> >+
> >+ return err;
> >+}
> >+
> >+static void mlxplat_lpc_ivb_config_clean(struct mlxplat_priv *priv,
> >+ struct pci_dev *pdev)
> >+{
> >+ mlxplat_lpc_dec_rng_config_clean(pdev,
> >+ priv->lpc_reg[MLXPLAT_CPLD_LPC_RANGE],
> >+ MLXPLAT_CPLD_LPC_RANGE);
> >+ mlxplat_lpc_dec_rng_config_clean(pdev,
> >+ priv-
> >lpc_reg[MLXPLAT_CPLD_LPC_I2C_RANGE],
> >+ MLXPLAT_CPLD_LPC_I2C_RANGE);
> >+
> >+}
> >+
> >+static int mlxplat_lpc_range_config(struct mlxplat_priv *priv,
> >+ struct pci_dev *pdev)
> >+{
> >+ u32 val, lpc_clks;
> >+ int err;
> >+
> >+ err = pci_read_config_dword(pdev, MLXPLAT_CPLD_LPC_RNG_CTRL,
> &val);
> >+ if (err) {
> >+ dev_err(&priv->pdev->dev, "Access to LPC Ctrl reg failed, err
> %d\n",
> >+ err);
> >+ return -EFAULT;
> >+ }
> >+ lpc_clks = val & 0x3;
> >+ if (lpc_clks != MLXPLAT_CPLD_LPC_CLKS_EN) {
> >+ val &= 0xFFFFFFFC;
> >+ err = pci_write_config_dword(pdev,
> MLXPLAT_CPLD_LPC_RNG_CTRL,
> >+ val);
> >+ if (err) {
> >+ dev_err(&priv->pdev->dev, "Config LPC CLKS CTRL
> failed, err %d\n",
> >+ err);
> >+ return -EFAULT;
> >+ }
> >+ }
> >+
> >+ return err;
> >+}
> >+
> >+static int mlxplat_lpc_config(struct mlxplat_priv *priv) {
> >+ struct pci_dev *pdev = NULL;
> >+ u16 dev_id;
> >+ int err;
> >+
> >+ pdev = pci_get_bus_and_slot(MLXPLAT_CPLD_LPC_CTRL_IFC_BUS_ID,
> >+
> PCI_DEVFN(MLXPLAT_CPLD_LPC_CTRL_IFC_SLOT_ID,
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_FUNC_ID));
> >+
> >+ if (!pdev) {
> >+ dev_err(&priv->pdev->dev, "LPC controller bus:%d slot:%d
> func:%d not
> >found\n",
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_BUS_ID,
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_SLOT_ID,
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_FUNC_ID);
> >+ return -EFAULT;
> >+ }
> >+
> >+ err = pci_read_config_word(pdev, 2, &dev_id);
> >+ if (err) {
> >+ dev_err(&priv->pdev->dev, "Access PCIe LPC interface failed,
> err
> >%d\n",
> >+ err);
> >+ goto failure;
> >+ }
> >+
> >+ switch (dev_id) {
> >+ case MLXPLAT_CPLD_LPC_QM67_DEV_ID:
> >+ case MLXPLAT_CPLD_LPC_QM77_DEV_ID:
> >+ err = mlxplat_lpc_ivb_config(priv, pdev);
> >+ break;
> >+ case MLXPLAT_CPLD_LPC_RNG_DEV_ID:
> >+ err = mlxplat_lpc_range_config(priv, pdev);
> >+ break;
> >+ default:
> >+ err = -ENXIO;
> >+ dev_err(&priv->pdev->dev, "Unsupported DevId 0x%x bus:%d
> slot:%d
> >func:%d\n",
> >+ dev_id, MLXPLAT_CPLD_LPC_CTRL_IFC_BUS_ID,
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_SLOT_ID,
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_FUNC_ID);
> >+ goto failure;
> >+ }
> >+ priv->dev_id = dev_id;
> >+
> >+failure:
> >+ pci_dev_put(pdev);
> >+ return err;
> >+}
> >+
> >+static int mlxplat_lpc_config_clean(struct mlxplat_priv *priv) {
> >+ struct pci_dev *pdev = NULL;
> >+ int err = 0;
> >+
> >+ pdev = pci_get_bus_and_slot(MLXPLAT_CPLD_LPC_CTRL_IFC_BUS_ID,
> >+
> PCI_DEVFN(MLXPLAT_CPLD_LPC_CTRL_IFC_SLOT_ID,
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_FUNC_ID));
> >+ if (!pdev) {
> >+ dev_err(&priv->pdev->dev, "LPC controller bus:%d slot:%d
> func:%d not
> >found\n",
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_BUS_ID,
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_SLOT_ID,
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_FUNC_ID);
> >+ return -EFAULT;
> >+ }
> >+
> >+ switch (priv->dev_id) {
> >+ case MLXPLAT_CPLD_LPC_QM67_DEV_ID:
> >+ case MLXPLAT_CPLD_LPC_QM77_DEV_ID:
> >+ mlxplat_lpc_ivb_config_clean(priv, pdev);
> >+ break;
> >+ case MLXPLAT_CPLD_LPC_RNG_DEV_ID:
> >+ break;
> >+ default:
> >+ err = -ENXIO;
> >+ dev_err(&priv->pdev->dev, "Unsupported DevId 0x%x bus:%d
> slot:%d
> >func:%d\n",
> >+ priv->dev_id, MLXPLAT_CPLD_LPC_CTRL_IFC_BUS_ID,
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_SLOT_ID,
> >+ MLXPLAT_CPLD_LPC_CTRL_IFC_FUNC_ID);
> >+ break;
> >+ }
> >+
> >+ pci_dev_put(pdev);
> >+
> >+ return err;
> >+}
> >+
> >+static int __init mlxplat_init(void)
> >+{
> >+ struct mlxplat_priv *priv;
> >+ struct device *dev;
> >+ int i, j;
> >+ int err;
> >+
> >+ mlxplat_dev = platform_device_alloc(MLX_PLAT_DEVICE_NAME, -1);
> >+ if (!mlxplat_dev) {
> >+ pr_err("Alloc %s platform device failed\n",
> >+ MLX_PLAT_DEVICE_NAME);
> >+ return -ENOMEM;
> >+ }
> >+
> >+ err = platform_device_add(mlxplat_dev);
> >+ if (err) {
> >+ pr_err("Add %s platform device failed (%d)\n",
> >+ MLX_PLAT_DEVICE_NAME, err);
> >+ goto fail_platform_device_add;
> >+ }
> >+ dev = &mlxplat_dev->dev;
> >+
> >+ priv = devm_kzalloc(dev, sizeof(struct mlxplat_priv), GFP_KERNEL);
> >+ if (!priv) {
> >+ err = -ENOMEM;
> >+ dev_err(dev, "Failed to allocate mlxplat_priv\n");
> >+ goto fail_alloc;
> >+ }
> >+ platform_set_drvdata(mlxplat_dev, priv);
> >+ priv->pdev = mlxplat_dev;
> >+
> >+ err = mlxplat_lpc_config(priv);
> >+ if (err) {
> >+ dev_err(dev, "Failed to configure LPC interface\n");
> >+ goto fail_alloc;
> >+ }
> >+
> >+ err = mlxplat_lpc_request_regions(priv);
> >+ if (err) {
> >+ dev_err(dev, "Request ioregion failed (%d)\n", err);
> >+ goto fail_alloc;
> >+ }
> >+
> >+ priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", -1,
> >+ NULL, 0);
> >+ if (IS_ERR(priv->pdev_i2c)) {
> >+ err = PTR_ERR(priv->pdev_i2c);
> >+ goto fail_alloc;
> >+ };
> >+
> >+ for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
> >+ mlxplat_topo[i].pdev = platform_device_register_resndata(dev,
> >+ mlxplat_topo[i].name, i, NULL,
> >+ 0, &mlxplat_mux_data[i],
> >+ sizeof(mlxplat_mux_data[i]));
> >+ if (IS_ERR(mlxplat_topo[i].pdev)) {
> >+ err = PTR_ERR(mlxplat_topo[i].pdev);
> >+ goto fail_platform_mux_register;
> >+ }
> >+ }
> >+
> >+ return err;
> >+
> >+fail_platform_mux_register:
> >+ for (j = i; j > 0 ; j--)
> >+ platform_device_unregister(mlxplat_topo[j].pdev);
> >+ platform_device_unregister(priv->pdev_i2c);
> >+fail_alloc:
> >+ platform_device_del(mlxplat_dev);
> >+fail_platform_device_add:
> >+ platform_device_put(mlxplat_dev);
> >+
> >+ return err;
> >+}
> >+
> >+static void __exit mlxplat_exit(void)
> >+{
> >+ int i;
> >+ struct mlxplat_priv *priv = platform_get_drvdata(mlxplat_dev);
> >+
> >+ for (i = ARRAY_SIZE(mlxplat_mux_data) - 1; i >= 0 ; i--)
> >+ platform_device_unregister(mlxplat_topo[i].pdev);
> >+
> >+ platform_device_unregister(priv->pdev_i2c);
> >+ mlxplat_lpc_config_clean(priv);
> >+ platform_device_del(mlxplat_dev);
> >+ platform_device_put(mlxplat_dev);
> >+}
> >+
> >+module_init(mlxplat_init);
> >+module_exit(mlxplat_exit);
> >+
> >+MODULE_AUTHOR("Vadim Pasternak (vadimp@mellanox.com)");
> >+MODULE_DESCRIPTION("Mellanox platform driver"); MODULE_LICENSE("GPL
> >+v2"); MODULE_ALIAS("platform:mlx-platform");
>
> This is a horrifically uninformative piece of code. What does this driver do?
> Why is it needed? What makes it a "platform" in the sense of the way the term
> is used in the Linux kernel? How does it affect the overall system, and in what
> sense does it diverge from a standard x86?

Hi Peter,

Thank for your reply.
This driver provides support for the number of Mellanox systems (switches), based on I7, Celeron, ATOM processors and equipped with Mellanox ASICs for Eth 100G/50G/40G/25G support.
It configures relevant PCI ranges and create basic infrastructure for switch.

If the location in arch/x86/platform is not correct for such code, maybe you could suggest another appropriate location?

Thanks,
Vadim.

> --
> Sent from my Android device with K-9 Mail. Please excuse brevity and
> formatting.
\
 
 \ /
  Last update: 2016-09-17 09:59    [W:0.498 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site