lkml.org 
[lkml]   [2016]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [Patch v3 03/11] driver/edac/mpc85xx_edac: Drop setting/clearing RFXE bit in HID1
Date
On 08/09/2016 08:57 AM, york.sun@nxp.com wrote:
> On 08/08/2016 11:56 PM, Borislav Petkov wrote:
>> On Tue, Aug 09, 2016 at 05:06:39AM +0000, york sun wrote:
>>> It is uncorrectable. DDR controller can only report the error. I don't
>>> believe EDAC driver can do more. For the same reason I said we can leave
>>> RXFE as is, even for e500v1 case (with RIO or PCI is enabled). Nothing
>>> can be done with uncorrectable error.
>>
>> Of course it can: it can panic the machine so that it doesn't corrupt
>> data on secondary storage. You might consider whether this is a better
>> course of action instead of only reporting the error.
>>
>
> Boris,
>
> My opinion is the error shouldn't happen at the first place. It usually
> means wrong configuration or physical error on the hardware. An EDAC
> driver can report these errors. How far you want to go on the error
> handling is up for discussion. I don't think we should include those
> improvement in this patch set.
>

I want to add this, normally uncorrectable errors don't trigger machine
check on e500v1. RXFE controls different interrupt on e500v2. e500mc
doesn't support RXFE. Together with the reason I explained, I believe
EDAC driver shouldn't change RXFE.

I hope I made it clear.

York

\
 
 \ /
  Last update: 2016-08-09 19:41    [W:0.080 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site