lkml.org 
[lkml]   [2016]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: core: Add runtime resume checking
Date
When the usb device has entered suspend state by runtime suspend method, and
the sustem also try to enter suspend state by issuing usb_dev_suspend(), it
will issue pm_runtime_resume() function to deal with wrong wakeup setting in
choose_wakeup() function.

But if usb device resumes failed due to xhci has been into suspend state and
hardware is not accessible, which will set runtime errors. Thus when there is
slave attached, usb device will resume failed by runtime resume method due to
previous runtime errors.

Then we should check if it resumes successfully in choose_wakeup() function,
if it failed we should clear the runtime errors by pm_runtime_set_suspended()
function to avoid runtime resume failure.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
drivers/usb/core/driver.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index dadd1e8d..a1a0f5f 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1412,6 +1412,7 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
{
int w;
+ int ret;

/* Remote wakeup is needed only when we actually go to sleep.
* For things like FREEZE and QUIESCE, if the device is already
@@ -1431,8 +1432,12 @@ static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
/* If the device is autosuspended with the wrong wakeup setting,
* autoresume now so the setting can be changed.
*/
- if (udev->state == USB_STATE_SUSPENDED && w != udev->do_remote_wakeup)
- pm_runtime_resume(&udev->dev);
+ if (udev->state == USB_STATE_SUSPENDED && w != udev->do_remote_wakeup) {
+ ret = pm_runtime_resume(&udev->dev);
+ if (ret == -ESHUTDOWN)
+ pm_runtime_set_suspended(&udev->dev);
+ }
+
udev->do_remote_wakeup = w;
}

--
1.7.9.5
\
 
 \ /
  Last update: 2016-08-09 12:21    [W:0.130 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site