lkml.org 
[lkml]   [2016]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] dt-bindings: add doc for ibm,hotplug-aperture
Date
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
---
.../bindings/powerpc/opal/hotplug-aperture.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/powerpc/opal/hotplug-aperture.txt

diff --git a/Documentation/devicetree/bindings/powerpc/opal/hotplug-aperture.txt b/Documentation/devicetree/bindings/powerpc/opal/hotplug-aperture.txt
new file mode 100644
index 0000000..b8dffaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/opal/hotplug-aperture.txt
@@ -0,0 +1,26 @@
+Designated hotplug memory
+-------------------------
+
+This binding describes a region of hotplug memory which is not present at boot,
+allowing its eventual NUMA associativity to be prespecified.
+
+Required properties:
+
+- compatible
+ "ibm,hotplug-aperture"
+
+- reg
+ base address and size of the region (standard definition)
+
+- ibm,associativity
+ NUMA associativity (standard definition)
+
+Example:
+
+A 2 GiB aperture at 0x100000000, to be part of nid 3 when hotplugged:
+
+ hotplug-memory@100000000 {
+ compatible = "ibm,hotplug-aperture";
+ reg = <0x0 0x100000000 0x0 0x80000000>;
+ ibm,associativity = <0x4 0x0 0x0 0x0 0x3>;
+ };
--
1.8.3.1
\
 
 \ /
  Last update: 2016-08-08 21:21    [W:0.226 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site