lkml.org 
[lkml]   [2016]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/3] mfd: lp873x: Add lp873x PMIC support
On Fri, 05 Aug 2016, Keerthy wrote:
> On Friday 05 August 2016 01:33 PM, Lee Jones wrote:
> > On Wed, 29 Jun 2016, Keerthy wrote:
> >
> > > The LP873X chip is a power management IC for Portable Navigation Systems
> > > and Tablet Computing devices. It contains the following components:
> > >
> > > - Regulators.
> > > - Configurable General Purpose Output Signals(GPO).
> > >
> > > PMIC interacts with the main processor through i2c. PMIC has
> > > couple of LDOs(Linear Regulators), couple of BUCKs (Step-Down DC-DC
> > > Converter Cores) and GPOs(General Purpose Output Signals).
> > >
> > > Signed-off-by: Keerthy <j-keerthy@ti.com>
> > > ---
> > >
> > > Changes in v4:
> > >
> > > * Added Author.
> > > * Added the mfd_cell for gpio.
> > >
> > > Changes in v3:
> > >
> > > * Reordered the probe code.
> > > * Fixed Typo in Kconfig description.
> > > * Removed unused member from struct lp873x.
> > >
> > > drivers/mfd/Kconfig | 14 +++
> > > drivers/mfd/Makefile | 2 +
> > > drivers/mfd/lp873x.c | 99 +++++++++++++++++
> > > include/linux/mfd/lp873x.h | 264 +++++++++++++++++++++++++++++++++++++++++++++
> > > 4 files changed, 379 insertions(+)
> > > create mode 100644 drivers/mfd/lp873x.c
> > > create mode 100644 include/linux/mfd/lp873x.h
> > >
> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > > index 9987d86..e68ac28 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -1221,6 +1221,20 @@ config MFD_TPS65217
> > > This driver can also be built as a module. If so, the module
> > > will be called tps65217.
> > >
> > > +config MFD_LP873X
> >
> > Nicer as MFD_TI_LP873X I think.
> >
> > > + tristate "TI LP873X Power Management IC"
> > > + depends on I2C
> > > + select MFD_CORE
> > > + select REGMAP_I2C
> > > + help
> > > + If you say yes here then you get support for the LP873X series of
> > > + power management integrated circuits(PMIC).
> >
> > Power Management Integrated Circuits (PMIC).
>
> Okay
>
> >
> > > + These include voltage regulators, Thermal protection, Configurable
> > > + general purpose outputs(GPO) that are used in portable devices.
> >
> > Some here. Please standardise your capitalisation.
>
> Okay
>
> >
> > > + This driver can also be built as a module. If so, the module
> > > + will be called lp873x.
> > > +
> > > config MFD_TPS65218
> > > tristate "TI TPS65218 Power Management chips"
> > > depends on I2C
> > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > > index 2ba3ba3..7d9b965 100644
> > > --- a/drivers/mfd/Makefile
> > > +++ b/drivers/mfd/Makefile
> > > @@ -22,6 +22,8 @@ obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
> > > obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
> > > obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
> > >
> > > +obj-$(CONFIG_MFD_LP873X) += lp873x.o
> > > +
> > > obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
> > > obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
> > > obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o
> > > diff --git a/drivers/mfd/lp873x.c b/drivers/mfd/lp873x.c
> > > new file mode 100644
> > > index 0000000..54ed0ce
> > > --- /dev/null
> > > +++ b/drivers/mfd/lp873x.c
> > > @@ -0,0 +1,99 @@
> > > +/*
> > > + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
> > > + *
> > > + * Author: Keerthy <j-keerthy@ti.com>
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License as
> > > + * published by the Free Software Foundation version 2.
> > > + *
> > > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> > > + * kind, whether express or implied; without even the implied warranty
> > > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + */
> > > +
> > > +#include <linux/interrupt.h>
> > > +#include <linux/mfd/core.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/regmap.h>
> > > +
> > > +#include <linux/mfd/lp873x.h>
> > > +
> > > +static const struct regmap_config lp873x_regmap_config = {
> > > + .reg_bits = 8,
> > > + .val_bits = 8,
> > > + .max_register = LP873X_REG_MAX,
> > > +};
> > > +
> > > +static const struct mfd_cell lp873x_cells[] = {
> > > + { .name = "lp873x-regulator", },
> > > + { .name = "lp873x-gpio", },
> > > +};
> > > +
> > > +static int lp873x_probe(struct i2c_client *client,
> > > + const struct i2c_device_id *ids)
> > > +{
> > > + struct lp873x *lp873;
> > > + int ret;
> > > + unsigned int otpid;
> > > +
> > > + lp873 = devm_kzalloc(&client->dev, sizeof(*lp873), GFP_KERNEL);
> > > + if (!lp873)
> > > + return -ENOMEM;
> > > +
> > > + lp873->dev = &client->dev;
> > > +
> > > + lp873->regmap = devm_regmap_init_i2c(client, &lp873x_regmap_config);
> > > + if (IS_ERR(lp873->regmap)) {
> > > + ret = PTR_ERR(lp873->regmap);
> > > + dev_err(lp873->dev, "Failed to initialize register map: %d\n",
> > > + ret);
> >
> > Nit: I'd prefer you break after "->dev,".
>
> Okay
>
> >
> > > + return ret;
> > > + }
> > > +
> > > + mutex_init(&lp873->lp873_lock);
> >
> > How many locks do you have in 'struct lp873x'?
> >
> > I suggest that 'lock' will do fine.
>
> Okay.
>
> >
> > > + ret = regmap_read(lp873->regmap, LP873X_REG_OTP_REV, &otpid);
> > > + if (ret) {
> > > + dev_err(lp873->dev, "Failed to read OTP ID\n");
> > > + return ret;
> > > + }
> > > +
> > > + lp873->rev = otpid & LP873X_OTP_REV_OTP_ID;
> > > + i2c_set_clientdata(client, lp873);
> > > + ret = mfd_add_devices(lp873->dev, PLATFORM_DEVID_AUTO, lp873x_cells,
> > > + ARRAY_SIZE(lp873x_cells), NULL, 0, NULL);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static const struct of_device_id of_lp873x_match_table[] = {
> > > + { .compatible = "ti,lp8733", },
> > > + { .compatible = "ti,lp8732", },
> > > + {}
> > > +};
> > > +MODULE_DEVICE_TABLE(of, of_lp873x_match_table);
> > > +
> > > +static const struct i2c_device_id lp873x_id_table[] = {
> > > + { "lp873x", LP873X },
> > > + { "lp8732", LP873X },
> > > + { "lp8733", LP873X },
> >
> > Do you use these IDs at any point?
>
> I have lp8733 and lp8732 at the moment. They are register exact but
> different parts none the less. Hence having separate strings. As of now no
> differences seen in gpio/regulator modules so not using them anywhere.

I have a patch-set pending on the I2C list that removes all unused
'struct i2c_device_id' tables. To identify which ones are in use and
which ones can be removed, it would help if you could remove the
unused .id field.

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-08-05 11:41    [W:0.070 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site