Messages in this thread Patch in this message | | | From | Peter Senna Tschudin <> | Subject | [PATCH V4 2/4] Documentation/devicetree/bindings: b850v3_lvds_dp | Date | Fri, 5 Aug 2016 00:36:59 +0200 |
| |
Devicetree bindings documentation for the GE B850v3 LVDS/DP++ display bridge.
Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> --- Changes from V3: - 2/4 instead of 3/5
Unchanged from V2
Changes from V1: - Replaced '_' by '-' in node names or compatible strings - Added missing @73 to the example
.../devicetree/bindings/ge/b850v3-lvds-dp.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
diff --git a/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt new file mode 100644 index 0000000..f05c3e9 --- /dev/null +++ b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt @@ -0,0 +1,37 @@ +Driver for GE B850v3 LVDS/DP++ display bridge + +Required properties: + - compatible : should be "ge,b850v3-lvds-dp". + - reg : should contain the address used to ack the interrupts. + - interrupt-parent : phandle of the interrupt controller that services + interrupts to the device + - interrupts : one interrupt should be described here, as in + <0 IRQ_TYPE_LEVEL_HIGH>. + - edid-reg : should contain the address used to read edid information + - port : should describe the video signal connection between the host + and the bridge. + +Example: + +&mux2_i2c2 { + status = "okay"; + clock-frequency = <100000>; + + b850v3-lvds-dp-bridge@73 { + compatible = "ge,b850v3-lvds-dp"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x73>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + edid-reg = <0x72>; + + port { + b850v3_dp_bridge_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; -- 2.5.5
| |