lkml.org 
[lkml]   [2016]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/7] dts: sun8i: add extra uart/i2c to H3
Date
From: Jorik Jonker <jorik@kippendief.biz>

This is v2 of my patch series. Just after sending I noticed the interrupts
of i2c1 were too liberally copy/paste'd. This is fixed in v2.

This series is a follow-up to Martin Ayotte's efforts to add additional UARTS
and I2C ports to the AllWinner H3 SoC DTS files. In this series I explicitly
leave out i2c2, since this is not broken out on my boards, so I cannot verify if
it actually works.

After the patch, one enables for example uart1 on a opi+ like this from u-boot:
=> fdt set /soc/serial@01c28400 status okay

Regards,
Jorik

Jorik Jonker (7):
dts: sun8i-h3: add pinmux definitions for uart2/uart3
dts: sun8i-h3: add pinmux definitions for i2c0/i2c1
dts: sun8i-h3: add i2c0/i2c1 SoC peripherals
dts: sun8i-h3: add UART1-3 to Orange Pi Plus
dts: sun8i-h3: add UART1-3 to Orange Pi PC
dts: sun8i-h3: add I2C0-1 to Orange Pi Plus
dts: sun8i-h3: add I2C0-1 to Orange Pi PC

arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 25 ++++++++++++++
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 25 ++++++++++++++
arch/arm/boot/dts/sun8i-h3.dtsi | 50 ++++++++++++++++++++++++++++
3 files changed, 100 insertions(+)

--
2.7.4

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.066 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site