lkml.org 
[lkml]   [2016]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] arm64: dts: rockchip: add eMMC's power domain support for rk3399
Hi,

On Sun, Aug 28, 2016 at 8:25 PM, Shawn Lin <shawn.lin@rock-chips.com> wrote:
> On 2016/8/29 10:50, Elaine Zhang wrote:
>>
>>
>>
>> On 08/27/2016 11:05 PM, Shawn Lin wrote:
>>>
>>> On 2016/8/27 21:41, Ziyuan Xu wrote:
>>>>
>>>> Control power domain for eMMC via genpd to reduce power consumption.
>>>>
>>>> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
>>>> Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
>>>>
>>>
>>> It looks nice to me. But this should be merged after applying that[0]
>>> as your patch will break bind/unbind test for sdhci-of-arasan on rk3399
>>> without it[0]. Moreover, Elaine should make sure that upstreamed
>>> rockchip power domain stuff would not off pd for emmc, *otherwise*, I
>>> should update my patch to make sure we update clkmul every time when
>>> doing suspend 2 resume..
>>>
>>>
>> Forgot to say:
>> If use pd, Although there is no call to power odd the pd_emmc,
>> it will be power off when the system doing suspend 2 resume.
>> (Because the system call
>> __device_suspend_noirq->pm_genpd_suspend_noirq->rockchip_pd_power_off)
>
>
> Thanks for explaining this. I checked the code a bit and actually I
> don't need to updata clkmul since it was recorded, although it is still
> reset to 0x10 reading from syscon. So for that, we can now pick it
> up without waiting for my sdhci-of-arasan's update.
>
> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

This is fine to pick up _only_ if you don't care about suspend/resume.
If you care about suspend/resume then someone needs to first write a
patch that will re-init all "corecfg" values after power is turned on.

Technically I think this should probably use "pm runtime" and not
normal suspend/resume hooks. Any time we end up pm runtime suspended
then I think our power will go off (because of genpd?) and we need to
restore values.

I'm not sure if this should be done in a generic way where we try to
save and restore all values in the "sdhci_arasan_soc_ctl_map" or if we
should try to be smarter...


-Doug

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:2.252 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site