Messages in this thread | | | Subject | Re: [PATCH 2/2] ARM: dts: sun8i-h3: Add UART1 pinctrl | From | Milo Kim <> | Date | Wed, 31 Aug 2016 17:36:18 +0900 |
| |
Hi Maxime,
On 08/26/2016 04:10 PM, Maxime Ripard wrote: > Hi Milo, > > On Thu, Aug 25, 2016 at 03:44:54PM +0900, Milo Kim wrote: >> In H3, PA5 can be used as PWM and UART0. If the PWM is used, the console >> UART should be moved to other port. >> This patch enables UART1 pinctrl to support this case. >> >> PA5: PWM >> PG6, PG7: debug console >> >> Cc: Chen-Yu Tsai <wens@csie.org> >> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> >> Cc: Rob Herring <robh+dt@kernel.org> >> Signed-off-by: Milo Kim <woogyom.kim@gmail.com> >> --- >> arch/arm/boot/dts/sun8i-h3.dtsi | 7 +++++++ >> 1 file changed, 7 insertions(+) >> >> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi >> index 3a965fb..fdb6801 100644 >> --- a/arch/arm/boot/dts/sun8i-h3.dtsi >> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi >> @@ -526,6 +526,13 @@ >> allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> }; >> >> + uart1_pins_a: uart1@0 { >> + allwinner,pins = "PG6", "PG7"; >> + allwinner,function = "uart1"; >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>; >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; >> + }; >> + > > Our policy is that we don't introduce new pinctrl nodes that are not > used by any board to avoid bloating the DT too much with unused nodes. > > If you have a board using it, please submit that change as well.
UART1 was already added in sun8i-h3.dtsi, so I drop this change in v2.
Commit-ID: 966c11a3b5e4
Best regards, Milo
| |