lkml.org 
[lkml]   [2016]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: [RESEND AGAIN][PATCH 1/2] phy: bcm-ns2-pcie: Get rid of struct ns2_pci_phy
> -----Original Message-----
> From: Axel Lin [mailto:axel.lin@ingics.com]
> Sent: 30 August 2016 19:24
> To: Kishon Vijay Abraham I
> Cc: Pramod Kumar; Andrew Lunn; Jon Mason; linux-kernel@vger.kernel.org;
> Axel Lin
> Subject: [RESEND AGAIN][PATCH 1/2] phy: bcm-ns2-pcie: Get rid of struct
> ns2_pci_phy
>
> By setting phy_set_drvdata(phy, mdiodev), struct ns2_pci_phy can be
removed.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> Reviewed-and-tested-by: Jon Mason <jon.mason@broadcom.com>
> ---
> This was sent on http://www.spinics.net/lists/netdev/msg383513.html
> Resent on https://lkml.org/lkml/2016/8/12/658
> drivers/phy/phy-bcm-ns2-pcie.c | 25 +++++--------------------
> 1 file changed, 5 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/phy/phy-bcm-ns2-pcie.c
b/drivers/phy/phy-bcm-ns2-pcie.c
> index 9513f7a..ee61772 100644
> --- a/drivers/phy/phy-bcm-ns2-pcie.c
> +++ b/drivers/phy/phy-bcm-ns2-pcie.c
> @@ -18,11 +18,6 @@
> #include <linux/phy.h>
> #include <linux/phy/phy.h>
>
> -struct ns2_pci_phy {
> - struct mdio_device *mdiodev;
> - struct phy *phy;
> -};
> -
> #define BLK_ADDR_REG_OFFSET 0x1f
> #define PLL_AFE1_100MHZ_BLK 0x2100
> #define PLL_CLK_AMP_OFFSET 0x03
> @@ -30,17 +25,17 @@ struct ns2_pci_phy {
>
> static int ns2_pci_phy_init(struct phy *p) {
> - struct ns2_pci_phy *phy = phy_get_drvdata(p);
> + struct mdio_device *mdiodev = phy_get_drvdata(p);
> int rc;
>
> /* select the AFE 100MHz block page */
> - rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
> + rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
> BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
> if (rc)
> goto err;
>
> /* set the 100 MHz reference clock amplitude to 2.05 v */
> - rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
> + rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
> PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
> if (rc)
> goto err;
> @@ -48,7 +43,7 @@ static int ns2_pci_phy_init(struct phy *p)
> return 0;
>
> err:
> - dev_err(&phy->mdiodev->dev, "Error %d writing to phy\n", rc);
> + dev_err(&mdiodev->dev, "Error %d writing to phy\n", rc);
> return rc;
> }
>
> @@ -60,7 +55,6 @@ static int ns2_pci_phy_probe(struct mdio_device
> *mdiodev) {
> struct device *dev = &mdiodev->dev;
> struct phy_provider *provider;
> - struct ns2_pci_phy *p;
> struct phy *phy;
>
> phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops); @@ -
> 69,16 +63,7 @@ static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
> return PTR_ERR(phy);
> }
>
> - p = devm_kmalloc(dev, sizeof(struct ns2_pci_phy),
> - GFP_KERNEL);
> - if (!p)
> - return -ENOMEM;
> -
> - p->mdiodev = mdiodev;
> - dev_set_drvdata(dev, p);
> -
> - p->phy = phy;
> - phy_set_drvdata(phy, p);
> + phy_set_drvdata(phy, mdiodev);
>
> provider = devm_of_phy_provider_register(&phy->dev,
> of_phy_simple_xlate);
> --
Looks fine to me.

Reviewed-by: Pramod Kumar <pramodku@broadcom.com>
> 2.5.0

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.064 / U:2.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site