lkml.org 
[lkml]   [2016]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] powerpc: move hmi.c to arch/powerpc/kvm/
Date
Paolo Bonzini <pbonzini@redhat.com> writes:

> hmi.c functions are unused unless sibling_subcore_state is nonzero, and
> that in turn happens only if KVM is in use. So move the code to
> arch/powerpc/kvm/, putting it under CONFIG_KVM_BOOK3S_64_HANDLER
> rather than CONFIG_PPC_BOOK3S_64. The sibling_subcore_state is also
> included in struct paca_struct only if KVM is supported by the kernel.

Ok. Initially I was concerned because there are a bunch of non-KVM
related HMI causes (e.g. the CAPP will raise an HMI if it loses the link
to the CAPI card.)
https://github.com/open-power/skiboot/blob/master/core/hmi.c lists lots
of HMIs created by hardware events.

Having said that, you're right that this particular file is KVM
specific.

Reviewed-by: Daniel Axtens <dja@axtens.net>

Mahesh: is there a way to cause the TB to desynchronise and then test if
this resynchronisation works?

Regards,
Daniel

>
> Cc: Paul Mackerras <paulus@samba.org>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: kvm-ppc@vger.kernel.org
> Cc: kvm@vger.kernel.org
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> It would be nice to have this in 4.8, to minimize any 4.9 conflicts.
> Build-tested only, with and without KVM enabled.
>
> arch/powerpc/include/asm/hmi.h | 2 +-
> arch/powerpc/include/asm/paca.h | 10 +++++-----
> arch/powerpc/kernel/Makefile | 2 +-
> arch/powerpc/kvm/Makefile | 1 +
> arch/powerpc/{kernel/hmi.c => kvm/book3s_hv_hmi.c} | 0
> 5 files changed, 8 insertions(+), 7 deletions(-)
> rename arch/powerpc/{kernel/hmi.c => kvm/book3s_hv_hmi.c} (100%)
>
> diff --git a/arch/powerpc/include/asm/hmi.h b/arch/powerpc/include/asm/hmi.h
> index 88b4901ac4ee..d3b6ad6e137c 100644
> --- a/arch/powerpc/include/asm/hmi.h
> +++ b/arch/powerpc/include/asm/hmi.h
> @@ -21,7 +21,7 @@
> #ifndef __ASM_PPC64_HMI_H__
> #define __ASM_PPC64_HMI_H__
>
> -#ifdef CONFIG_PPC_BOOK3S_64
> +#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
>
> #define CORE_TB_RESYNC_REQ_BIT 63
> #define MAX_SUBCORE_PER_CORE 4
> diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
> index 148303e7771f..625321e7e581 100644
> --- a/arch/powerpc/include/asm/paca.h
> +++ b/arch/powerpc/include/asm/paca.h
> @@ -183,11 +183,6 @@ struct paca_struct {
> */
> u16 in_mce;
> u8 hmi_event_available; /* HMI event is available */
> - /*
> - * Bitmap for sibling subcore status. See kvm/book3s_hv_ras.c for
> - * more details
> - */
> - struct sibling_subcore_state *sibling_subcore_state;
> #endif
>
> /* Stuff for accurate time accounting */
> @@ -202,6 +197,11 @@ struct paca_struct {
> struct kvmppc_book3s_shadow_vcpu shadow_vcpu;
> #endif
> struct kvmppc_host_state kvm_hstate;
> + /*
> + * Bitmap for sibling subcore status. See kvm/book3s_hv_ras.c for
> + * more details
> + */
> + struct sibling_subcore_state *sibling_subcore_state;
> #endif
> };
>
> diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
> index b2027a5cf508..fe4c075bcf50 100644
> --- a/arch/powerpc/kernel/Makefile
> +++ b/arch/powerpc/kernel/Makefile
> @@ -41,7 +41,7 @@ obj-$(CONFIG_VDSO32) += vdso32/
> obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
> obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
> obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o
> -obj-$(CONFIG_PPC_BOOK3S_64) += mce.o mce_power.o hmi.o
> +obj-$(CONFIG_PPC_BOOK3S_64) += mce.o mce_power.o
> obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
> obj-$(CONFIG_PPC64) += vdso64/
> obj-$(CONFIG_ALTIVEC) += vecemu.o
> diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
> index 1f9e5529e692..855d4b95d752 100644
> --- a/arch/powerpc/kvm/Makefile
> +++ b/arch/powerpc/kvm/Makefile
> @@ -78,6 +78,7 @@ kvm-book3s_64-builtin-xics-objs-$(CONFIG_KVM_XICS) := \
>
> ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
> kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \
> + book3s_hv_hmi.o \
> book3s_hv_rmhandlers.o \
> book3s_hv_rm_mmu.o \
> book3s_hv_ras.o \
> diff --git a/arch/powerpc/kernel/hmi.c b/arch/powerpc/kvm/book3s_hv_hmi.c
> similarity index 100%
> rename from arch/powerpc/kernel/hmi.c
> rename to arch/powerpc/kvm/book3s_hv_hmi.c
> --
> 1.8.3.1
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-08-04 06:01    [W:0.074 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site