lkml.org 
[lkml]   [2016]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Entropy sources
From
Date
On 08/25/16 16:35, Sandy Harris wrote:
> On Thu, Aug 25, 2016 at 5:30 PM, H. Peter Anvin <hpa@zytor.com> wrote:
>
>> The network stack is a good source of entropy, *once it is online*.
>> However, the most serious case is while the machine is still booting,
>> when the network will not have enabled yet.
>>
>> -hpa
>
> One possible solution is at:
> https://github.com/sandy-harris/maxwell
>
> A small (< 700 lines) daemon that gets entropy from timer imprecision
> and variations in time for arithmetic (cache misses, interrupts, etc.)
> and pumps it into /dev/random. Make it the first userspace program
> started and all should be covered. Directory above includes a PDF doc
> with detailed rationale and some discussion of alternate solutions.
>
> Of course if you are dealing with a system-on-a-chip or low-end
> embedded CPU & the timer is really inadequate, this will not work
> well. Conceivably well enough, but we could not know that without
> detailed analysis for each chip in question.
>

A lot of this is exactly the same thing /dev/random already does in
kernel space. I have already in the past expressed skepticism toward
this approach, because a lot of the analysis done has simply been bogus.

-hpa

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:2.444 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site