lkml.org 
[lkml]   [2016]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] usb: dwc3: gadget: don't rely on jiffies while holding spinlock
Date
__dwc3_gadget_wakeup() is called while holding a spinlock, then depends on
jiffies in order to timeout while polling the USB core for a link state
update. In the case the wakeup failed, the timeout will never happen and
will also cause the cpu to stall until rcu_preempt kicks in.

This switches to a "decrement variable and wait" timeout scheme.

Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
---
v2. removed udelay() from while loop
note: resubmitting since earlier patch had errata on e-mail address

drivers/usb/dwc3/gadget.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 1f5597e..122e64d 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1433,7 +1433,7 @@ static int dwc3_gadget_get_frame(struct usb_gadget *g)

static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
{
- unsigned long timeout;
+ int retries;

int ret;
u32 reg;
@@ -1484,9 +1484,9 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
}

/* poll until Link State changes to ON */
- timeout = jiffies + msecs_to_jiffies(100);
+ retries = 20000;

- while (!time_after(jiffies, timeout)) {
+ while (retries--) {
reg = dwc3_readl(dwc->regs, DWC3_DSTS);

/* in HS, means ON */
--
2.7.4
\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.031 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site