Messages in this thread | | | Date | Sat, 20 Aug 2016 19:33:38 +0100 | From | John Keeping <> | Subject | Re: [PATCH] Try to support analog audio codec at firefly reload |
| |
On Tue, Aug 16, 2016 at 04:42:06AM +0800, Randy Li wrote: > This patch could enabled the es8328 codec at firefly reload board, > but it doesn't not really work. I disable the mute of channel > Left mix and Right mix in alsamixer, I could hear the noise from > my headphone, but it never be a music. > I just send this patch here to see whether somebody could figure > out what is wrong, I am really not familiar with sound.
Have you tried adding an mclk-fs setting to the simple-audio-card? You probably want to set it to 256, which will allow 44.1kHz, 48kHz, 88.2kHz and 96kHz at the codec. This will give more functionality than pinning the clock to a specific rate.
For the Rock2 Square, I write a machine driver for the sound because the headphone GPIO setup cannot be made to work with simple-audio-card; I found the Firefly Reload schematic and it looks like the configuration hardware is very similar. It's a bit of a mess but you can find it on Github [1] if you want to take a look.
[1] https://github.com/johnkeeping/linux/tree/topic/audio
| |