lkml.org 
[lkml]   [2016]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 6/9] mtd: spi-nor: Support R/W for S25FS-S family flash
Date


On August 06, 2016 10:27 PM, Jagan Teki wrote:

> On 22 April 2016 at 12:09, Yunhui Cui <B56489@freescale.com> wrote:
> > From: Yunhui Cui <yunhui.cui@nxp.com>
> >
> > With the physical sectors combination, S25FS-S family flash requires
> > some special operations for read/write functions.
> >
> > Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>
> > ---
> > drivers/mtd/spi-nor/spi-nor.c | 59
> > +++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 59 insertions(+)
> >
> > diff --git a/drivers/mtd/spi-nor/spi-nor.c
> > b/drivers/mtd/spi-nor/spi-nor.c index 157841d..91ee920 100644
> > --- a/drivers/mtd/spi-nor/spi-nor.c
> > +++ b/drivers/mtd/spi-nor/spi-nor.c
> > @@ -39,6 +39,10 @@
> >
> > #define SPI_NOR_MAX_ID_LEN 6
> > #define SPI_NOR_MAX_ADDR_WIDTH 4
> > +/* Added for S25FS-S family flash */
> > +#define SPINOR_CONFIG_REG3_OFFSET 0x800004
> > +#define CR3V_4KB_ERASE_UNABLE 0x8
> > +#define SPINOR_S25FS_FAMILY_ID 0x81
> >
> > struct flash_info {
> > char *name;
> > @@ -78,6 +82,7 @@ struct flash_info {
> > };
> >
> > #define JEDEC_MFR(info) ((info)->id[0])
> > +#define EXT_ID(info) ((info)->id[5])
>
> I don't think 5th only the ext and usually last 3 bytes are called as
> ext_jedec if the id length is 6 bytes.

[Yunhui] ok, I will update it in next version.

>
> >
> > static const struct flash_info *spi_nor_match_id(const char *name);
> >
> > @@ -881,6 +886,7 @@ static const struct flash_info spi_nor_ids[] = {
> > */
> > { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64,
> SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> > { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128,
> > SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> > + { "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512, 0)},
> > { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
> > { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512,
> SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> > { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256,
> > SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, @@ -1018,6 +1024,53 @@ static
> const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
> > return ERR_PTR(-ENODEV);
> > }
> >
> > +/*
> > + * The S25FS-S family physical sectors may be configured as a
> > + * hybrid combination of eight 4-kB parameter sectors
> > + * at the top or bottom of the address space with all
> > + * but one of the remaining sectors being uniform size.
> > + * The Parameter Sector Erase commands (20h or 21h) must
> > + * be used to erase the 4-kB parameter sectors individually.
> > + * The Sector (uniform sector) Erase commands (D8h or DCh)
> > + * must be used to erase any of the remaining
> > + * sectors, including the portion of highest or lowest address
> > + * sector that is not overlaid by the parameter sectors.
> > + * The uniform sector erase command has no effect on parameter sectors.
> > + */
> > +static int spansion_s25fs_disable_4kb_erase(struct spi_nor *nor) {
> > + struct fsl_qspi *q;
> > + u32 cr3v_addr = SPINOR_CONFIG_REG3_OFFSET;
> > + u8 cr3v = 0x0;
> > + int ret = 0x0;
> > +
> > + q = nor->priv;
>
> Why this q?

[Yunhui] ok, It seems that 'q' is useless in the function. I will update it in next version , thanks.

>
> --
> Jagan.
\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.095 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site