lkml.org 
[lkml]   [2016]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 0/7] Add support for monitoring guest TLB operations
From
Date


On 16/08/2016 12:45, Punit Agrawal wrote:
> Hi,
>
> ARMv8 supports trapping guest TLB maintenance operations to the
> hypervisor. This trapping mechanism can be used to monitor the use of
> guest TLB instructions.
>
> As taking a trap for every TLB operation can have significant
> overhead, trapping should only be enabled -
>
> * on user request
> * for the VM of interest
>
> This patchset adds support to listen to perf trace event state change
> notifications. The notifications and associated context are then used
> to enable trapping of guest TLB operations when requested by the
> user. The trap handling generates trace events (kvm_tlb_invalidate)
> which can already be counted using existing perf trace
> functionality.
>
> Trapping of guest TLB operations is disabled when not being monitored
> (reducing profiling overhead).
>
> I would appreciate feedback on the approach to tie the control of TLB
> monitoring with perf trace events (Patch 1) especially if there are
> any suggestions on avoiding (or reducing) the overhead of "perf trace"
> notifications.
>
> I looked at using regfunc/unregfunc tracepoint hooks but they don't
> include the event context. But the bigger problem was that the
> callbacks are only called on the first instance of simultaneously
> executing perf stat invocations.
>
> The patchset is based on v4.8-rc2 and adds support for monitoring
> guest TLB operations on 64bit hosts. If the approach taken in the
> patches is acceptable, I'll add 32bit host support as well.
>
> With this patchset, 'perf' tool when attached to a VM process can be
> used to monitor the TLB operations. E.g., to monitor a VM with process
> id 4166 -
>
> # perf stat -e "kvm:kvm_tlb_invalidate" -p 4166
>
> Perform some operations in VM (running 'make -j 7' on the kernel
> sources in this instance). Breaking out of perf shows -
>
> Performance counter stats for process id '4166':
>
> 7,471,974 kvm:kvm_tlb_invalidate
>
> 374.235405282 seconds time elapsed
>
> All feedback welcome.

Can you explain what this is used for? In other words, why would this
be used instead of just running perf in the guest?

Thanks,

Paolo

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.136 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site