lkml.org 
[lkml]   [2016]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 3/7] dt: bindings: Add nokia-bluetooth
Hi!

> >> > + - reset-gpios: Should specify the gpio for bluetooth reset
> >> > + - host-wakeup-gpios: Should specify the gpio for host wakeup
> >>
> >> Should be interrupt instead?
> >
> > Yes this is mostly an interrupt, but I need to read the current
> > line state.
>
> When? If the interrupt is level triggered, then you can get the line
> state based on whether you get an interrupt or not. If this needs to
> be a wakeup source (see the wakeup source binding), then it needs to
> be an interrupt.

What is wrong with GPIO? It is simply a piece of wire. Yes, we'll
configure it to generate an interrupt, or maybe not, but that's
software detail, the device tree just should not care....
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

\
 
 \ /
  Last update: 2016-09-17 09:57    [W:0.045 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site