lkml.org 
[lkml]   [2016]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 0/3] i2c: designware: improve performance for transfers
Date
On Fri, 2016-08-12 at 16:59 +0200, Christian Ruppert wrote:
> On 29.07.2016 00:03, Lucas De Marchi wrote:
> >
> > This can be considered a v3 of "i2c: designware: do not disable
> > adapter after
> > transfer". Differences are:
> >
> >     - Now there's a first patch that does not depend on IC_TAR
> > being dynamically
> >       enabled/disabled: it just doesn't wait for the state change
> > when not needed.
> >
> >     - We added a patch that allows detecting if HW supports the
> > dynamic TAR updates
> >
> >     - In the last patch the bits were changed as suggested by
> > Jarkko.
> >
> >     - This is tested on BayTrail and CherryTrail, both of them
> > returning true for
> >       "dynamically update TAR"
>
> Tested-by: Christian Ruppert <christian.ruppert@alitech.com>
> on TB101 with Linux-4.7
>
> Seems to work perfectly now, congratulations and thanks for your
> patience with our platform... This was a hard one!

Awesome, thanks for testing this series.

Looks like I forgot to CC Wolfram. CC'ing now on this cover letter, let
me know if you also need the individual patches.


Lucas De Marchi

>
> >
> > José Roberto de Souza (1):
> >   i2c: designware: wait for disable/enable only if necessary
> >
> > Lucas De Marchi (2):
> >   i2c: designware: detect when dynamic tar update is possible
> >   i2c: designware: do not disable adapter after transfer
> >
> >  drivers/i2c/busses/i2c-designware-core.c | 103
> > +++++++++++++++++++++----------
> >  drivers/i2c/busses/i2c-designware-core.h |   1 +
> >  2 files changed, 72 insertions(+), 32 deletions(-)
> >
>
\
 
 \ /
  Last update: 2016-09-17 09:56    [W:0.197 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site