lkml.org 
[lkml]   [2016]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Regression] "irqdomain: Don't set type when mapping an IRQ" breaks nexus7 gpio buttons
From
Date

On 10/08/16 14:58, Linus Walleij wrote:
> On Wed, Aug 10, 2016 at 11:56 AM, Jon Hunter <jonathanh@nvidia.com> wrote:
>> Hi Marc, Linus,
>> On 10/08/16 10:41, Marc Zyngier wrote:
>>> On 10/08/16 00:03, Linus Walleij wrote:
>>>> On Tue, Aug 9, 2016 at 3:20 PM, Jon Hunter <jonathanh@nvidia.com> wrote:
>>>>
>>>>> If that works, then does the following also work (without the above) ...
>>>>>
>>>>> diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
>>>>> index b4c1bc7c9ca2..e111b72e3162 100644
>>>>> --- a/kernel/irq/chip.c
>>>>> +++ b/kernel/irq/chip.c
>>>>> @@ -824,6 +824,7 @@ __irq_do_set_handler(struct irq_desc *desc, irq_flow_handler_t handle,
>>>>> irq_settings_set_norequest(desc);
>>>>> irq_settings_set_nothread(desc);
>>>>> desc->action = &chained_action;
>>>>> + __irq_set_trigger(desc, irqd_get_trigger_type(&desc->irq_data));
>>>>> irq_startup(desc, true);
>>>>> }
>>>>> }
> (...)
>>>> I tried this on my problematic platform and then this happens:
>>>>
>>>> preparing networking...
>>>> [ 2.628246] ------------[ cut here ]------------
>>>> [ 2.628303] WARNING: CPU: 0 PID: 92 at ../kernel/irq/chip.c:26
>>>> bad_chained_irq+0x44/0x4c
> (...)
>> Just to confirm is that with or without the proposed change?
>
> This is with:
> + __irq_set_trigger(desc, irqd_get_trigger_type(&desc->irq_data));
>
> No other changes.
>
> Before the change it boots, but the IRQs don't work.
>
> After the change it boots and crashes like that.

OK.

>> Linus, I have been trying to find out which qcom board has this smsc911x
>> but I was unable to find any, so more info on the platform would be great!
>
> It has nothing to do with the SMSC911x per se. The problem pertains
> to *all* IRQs from the PMIC.
>
> This is the original APQ8060 Dragonboard from BSquare.
> https://dflund.se/~triad/krad/dragonboard/

Where can I see the DT source for this board? There is a
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts but this does not appear
to be the same (does not have smsc911x).

Cheers
Jon

--
nvpublic

\
 
 \ /
  Last update: 2016-08-10 23:41    [W:1.583 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site