lkml.org 
[lkml]   [2016]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] dt-bindings: Document the STM32 reset bindings
On Mon, Jul 04, 2016 at 03:47:30PM +0200, gabriel.fernandez@st.com wrote:
> From: Maxime Coquelin <mcoquelin.stm32@gmail.com>
>
> This adds documentation of device tree bindings for the
> STM32 reset controller.
>
> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> ---
> .../devicetree/bindings/reset/st,stm32-rcc.txt | 50 ++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
>
> diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> new file mode 100644
> index 0000000..333080c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> @@ -0,0 +1,50 @@
> +STMicroelectronics STM32 Peripheral Reset Controller
> +====================================================
> +
> +The RCC IP is both a reset and a clock controller. This documentation only
> +documents the reset part.

The clock part is already documented or will do later? Either way, you
are describing an IP block, so please describe all of it now and in one
place.

Rob

\
 
 \ /
  Last update: 2016-07-05 19:01    [W:0.287 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site