lkml.org 
[lkml]   [2016]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/8] Input: synaptics-rmi4: Add dribble and palm gesture parameters to device tree
From
Date
Hi Andrew

On 29/06/2016 01:44, Andrew Duggan wrote:
> On 06/28/2016 01:56 PM, Rob Herring wrote:
>> On Fri, Jun 24, 2016 at 05:18:37PM -0700, Andrew Duggan wrote:
>>> Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
>>> ---
>>> .../devicetree/bindings/input/rmi4/rmi_2d_sensor.txt | 4 ++++
>>> drivers/input/rmi4/rmi_2d_sensor.c | 11
>>> +++++++++++
>>> 2 files changed, 15 insertions(+)
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
>>> b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
>>> index f2c30c8..86cb8e3 100644
>>> --- a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
>>> +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
>>> @@ -37,6 +37,10 @@ Optional Properties:
>>> disable reporing absolute position data.
>>> - syna,rezero-wait-ms: Time in miliseconds to wait after issuing a rezero
>>> command.
>>> +- syna,dribble-enable: Enable reporting of dribble packets in the
>>> firmware.
>>> +- syna,dribble-disable: Disable reporting of dribble packets in the
>>> firmware.
>>> +- syna,palm-detect-enable: Enable reporting the palm detect gesture in
>>> the firmware.
>>> +- syna,palm-detect-disable: Disable reporting the palm detect gesture
>>> in the firmware.
>> No need for enable and disable. Make the common case be no property and
>> the property is the opposite.
>
> There are actually three states here. No property means to use the default
> value set in the firmware. The enable parameter means that the default
> should be overwritten and the feature should be explicitly enabled. Disable
> means the feature should be explicitly disabled. An earlier version of this
> patch had one parameter per feature which needed to be set to 0, 1, or 2
> which correspond the the values of an enum in the driver. It was suggested
> that the current approach would be clearer then setting 0, 1, or 2.

I wonder if it might be worth mentioning explicitly in the devicetree
documentation that the firmware is being overridden - perhaps
"syna,dribble-force-disable"?

cheers

Nick

\
 
 \ /
  Last update: 2016-07-04 17:41    [W:0.052 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site