lkml.org 
[lkml]   [2016]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 3/5] Documentation/devicetree/bindings: b850v3_lvds_dp
Date
Devicetree bindings documentation for the GE B850v3 LVDS/DP++
display bridge.

Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
---
Unchanged from V2.

Changes from V1:
- Replaced '_' by '-' in node names or compatible strings
- Added missing @73 to the example

.../devicetree/bindings/ge/b850v3-lvds-dp.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt

diff --git a/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
new file mode 100644
index 0000000..f05c3e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
@@ -0,0 +1,37 @@
+Driver for GE B850v3 LVDS/DP++ display bridge
+
+Required properties:
+ - compatible : should be "ge,b850v3-lvds-dp".
+ - reg : should contain the address used to ack the interrupts.
+ - interrupt-parent : phandle of the interrupt controller that services
+ interrupts to the device
+ - interrupts : one interrupt should be described here, as in
+ <0 IRQ_TYPE_LEVEL_HIGH>.
+ - edid-reg : should contain the address used to read edid information
+ - port : should describe the video signal connection between the host
+ and the bridge.
+
+Example:
+
+&mux2_i2c2 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ b850v3-lvds-dp-bridge@73 {
+ compatible = "ge,b850v3-lvds-dp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x73>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ edid-reg = <0x72>;
+
+ port {
+ b850v3_dp_bridge_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
--
2.5.5
\
 
 \ /
  Last update: 2016-07-31 22:41    [W:0.339 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site